The question involves calculating the pressure of water in a section of pipe with a smaller diameter. The pipe initially has a diameter of 6 cm and carries water at a certain speed and pressure. It then becomes horizontal and the diameter reduces to 4 cm. The goal is to determine the pressure in the section with the smaller diameter, given the provided information.
The question asks for the linear momentum and angular momentum of a person running in a straight line, passing by another person at a minimum distance. The person's mass, speed, and the minimum distance are given, and the objective is to calculate their linear momentum at the given position.
To calculate the pressure in the section of pipe with the smaller diameter, we can use Bernoulli's equation, which relates the pressure, velocity, and height of a fluid flowing in a pipe. We can apply this equation to the initial horizontal section and the section with the smaller diameter. By considering the change in velocity and height, we can solve for the pressure in the smaller diameter section.
The linear momentum of an object is given by the product of its mass and velocity. In this case, we are given the mass of the running person and their constant speed. By multiplying these values together, we can find the linear momentum. The angular momentum with respect to a point is given by the product of the moment of inertia and the angular velocity. However, since the person is moving in a straight line, the angular momentum with respect to the observer (standing in the park) is zero.
In summary, the first part involves calculating the pressure in a section of pipe with a smaller diameter using Bernoulli's equation, and the second part requires finding the linear momentum of a running person and noting that the angular momentum with respect to the observer is zero.
Learn more about Linear momentum:
https://brainly.com/question/30767107
#SPJ11
I want to check the answers
A man pulls a sled along a rough horizontal surface by applying a constant force at an angle above the horizontal. In pulling the sled a horizontal distance d, the work done by the man is: Fd/cos 0 Fd
The work done by the man in pulling the sled a horizontal distance d is Fd/cos θ. Understanding this relationship allows us to calculate the work done in various scenarios involving forces applied at angles relative to the displacement.
When a force is applied at an angle above the horizontal to pull an object, the work done is calculated as the product of the force applied, the displacement of the object, and the cosine of the angle between the force and the displacement vectors.
In this case, the force applied by the man is F, and the displacement of the sled is d. The angle between the force and the displacement vectors is given as θ. Therefore, the work done can be calculated as:
Work = Force × Displacement × cos θ
Substituting the values, we have:
Work = F × d × cos θ
Thus, the work done by the man in pulling the sled a horizontal distance d is Fd/cos θ.
The work done by the man in pulling the sled a horizontal distance d is given by the formula Fd/cos θ, where F is the applied force, d is the displacement, and θ is the angle between the force and the displacement vectors. This formula takes into account the component of the force in the direction of displacement, which is determined by the cosine of the angle. Understanding this relationship allows us to calculate the work done in various scenarios involving forces applied at angles relative to the displacement.
To know more about displacement ,visit:
https://brainly.com/question/14422259
#SPJ11
An acre, a unit of land measurement still in wide use, has a length of one furlong (1/8 mi) and a width of one-tenth of its length. (a) How many acres are in a square mile? (b) An acre-foot is the volume of water that would cover one acre of flat land to a depth of one foot. How many gallons are in an acre-foot?
4,096 acres are in a square mile. An acre-foot is the volume of water that would cover one acre of flat land to a depth of one foot. 7.48 gallons are in an acre-foot.
A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre and litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship. The volume of a container is typically thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the amount of fluid (liquid or gas) that the container may hold.
(a) A square mile has 8 x 8 = 64 furlongs on each side since there are 8 furlongs in a mile. Its area is therefore 64 x 64, or 4,096 acres.
(b) The amount of water needed to cover an acre of land with one foot of water is known as an acre-foot. A cubic foot is equivalent to 43,560 square feet per acre, or one acre-foot. One acre-foot is equivalent to 43,560 x 7.48, or 325,851.52 gallons, since one cubic foot is equal to 7.48 gallons.
To know more about volume, here:
https://brainly.com/question/28058531
#SPJ4
Jane han conducted a virtual xperiment using a PHET simulation and completed associated lab assignment in the simulation, there was a box on the on the floor Jane appred horizontal forces on the box and measured its acceleration She recorded the mass of the box, applied force and measured acceleration values in a datatable. Then she calculated the acceleration of the box with the used mass and force. She compared the calculated value to the measured value. Which physios concept she practiced in this experiment? Free Fall Newtons Law of Motion Conservation of Energy Simple Harmonic Motion Ideal Gas Law
The physics concept that Jane practiced in this experiment is Newton's Law of Motion.
Newton's Laws of Motion describe the relationship between the motion of an object and the forces acting upon it.
In the experiment, Jane applied horizontal forces to the box on the floor and measured its acceleration.
By recording the mass of the box and the applied force, she calculated the acceleration of the box using Newton's second law, which states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass (F = ma).
After calculating the expected acceleration based on the applied force and mass, Jane compared it to the measured acceleration value.
This comparison allows her to verify whether the measured acceleration aligns with the calculated value, thereby testing the principles of Newton's Laws of Motion.
Learn more about the Newton's Law of Motion:
brainly.com/question/25842103
#SPJ11
2. A thin layer of motor oil (n=1.515) floats on top of a puddle of water (n=1.33) in a driveway. [12 points] a. Light from street light at the end of the driveway hits the motor oil at an angle of 25° from the surface of the oil, as drawn in the figure to the right. Find the angle of refraction of the light inside the oil. [5 points] 25° Air, n = 1 Oil, n = 1.515 Water, n = 1.33 b. What is the angle of incidence of the light in the oil when it hits the water's surface? Explain how you know. [3 points] c. Find the angle of refraction of the light inside the water below the oil. [ 4 points ] New equations in this chapter : n₁ sin 0₁ = n₂ sin 0₂ sinớc= n2/n1 m || I s' h' S h || = S + = f
The angle of refraction of the light inside the water below the oil is approximately 19.48°.To solve this problem, we can use Snell's law,
which relates the angles of incidence and refraction to the indices of refraction of the two media involved. Snell's law is given by:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
where n₁ and n₂ are the indices of refraction of the two media, and θ₁ and θ₂ are the angles of incidence and refraction, respectively.
a. Light is incident from air (n = 1) to motor oil (n = 1.515). The angle of incidence is given as 25°. Let's find the angle of refraction in the oil.
Using Snell's law:
1 * sin(25°) = 1.515 * sin(θ₂)
sin(θ₂) = (1 * sin(25°)) / 1.515
θ₂ = sin^(-1)((1 * sin(25°)) / 1.515)
Evaluating this expression:
θ₂ ≈ 16.53°
Therefore, the angle of refraction of the light inside the oil is approximately 16.53°.
b. To find the angle of incidence of the light in the oil when it hits the water's surface, we can consider that the angle of incidence equals the angle of refraction in the oil due to the light transitioning from a higher refractive index medium (oil) to a lower refractive index medium (water). Therefore, the angle of incidence in the oil would also be approximately 16.53°.
c. Now, we need to find the angle of refraction of the light inside the water below the oil. The light is transitioning from oil (n = 1.515) to water (n = 1.33). Let's use Snell's law again:
1.515 * sin(θ₂) = 1.33 * sin(θ₃)
sin(θ₃) = (1.515 * sin(θ₂)) / 1.33
θ₃ = [tex]sin^_(-1)[/tex]((1.515 * sin(θ₂)) / 1.33)
Substituting the value of θ₂ (approximately 16.53°) into the equation
θ₃ ≈ [tex]sin^_(-1)[/tex]((1.515 * sin(16.53°)) / 1.33)
Evaluating this expression:
θ₃ ≈ 19.48°
Therefore, the angle of refraction of the light inside the water below the oil is approximately 19.48°.
To know more about angle of refraction visit:
https://brainly.com/question/14760207
#SPJ11
A wavelength of 1939.289 pm is observed in a hydrogen spectrum for a transition that ends in the ne = 43 level. What was n; for the initial level of the electron? (Enter your answer to the nearest int
A wavelength of 1939.289 pm is observed in a hydrogen spectrum for a transition that ends in the ne = 43 level, the initial level of the electron was n₁ = 44.
The Rydberg formula can be used to calculate the energy of a photon emitted in a hydrogen spectrum transition:
E = -13.6 * Z^2 * 1/n₁^2 - 13.6 * Z^2 * 1/n₂^2
Where:
E is the energy of the photon in joules
Z is the atomic number of the element (hydrogen has Z = 1)
n₁ is the initial energy level of the electron
n₂ is the final energy level of the electron
The energy of the photon can be converted to wavelength using the following equation:
λ = hc / E
Where:
λ is the wavelength of the photon in meters
h is Planck's constant (6.626 x 10^-34 J s)
c is the speed of light (3 x 10^8 m/s)
Plugging in the values for the wavelength of the photon and the atomic number of hydrogen, we get:
E = -13.6 * 1^2 * 1/43^2 - 13.6 * 1^2 * 1/44^2 = 1.36 * 10^-18 J
λ = 6.626 * 10^-34 J s * 3 * 10^8 m/s / 1.36 * 10^-18 J = 1939.289 pm
The Rydberg formula can also be used to calculate the initial energy level of the electron:
n₁^2 = n₂^2 * (E₂ / E₁)
Where:
n₁ is the initial energy level of the electron
n₂ is the final energy level of the electron
E₂ is the energy of the photon emitted (1.36 * 10^-18 J)
E₁ is the energy of the ground state of hydrogen (-13.6 * 1^2 * 1/1^2 = -13.6 * 10^-18 J)
Plugging in the values, we get:
n₁^2 = 44^2 * (1.36 * 10^-18 J / -13.6 * 10^-18 J) = 44^2
n₁ = 44
Therefore, the initial level of the electron was n₁ = 44.
To learn more about spectrum click here; brainly.com/question/30638947
#SPJ11
You want to make a 50Ω resistor from a poorly conducting material that has resistivity 0.020Ωm. The resistor will be a cylinder with a length 5 times its diameter. Current will flow lengthwise through the resistor. Part A What should be its length in cm ?
The length of the resistor should be approximately 17.5 cm to achieve a resistance of 50Ω.
To calculate the length of the resistor, we can use the formula for resistance:
R = (ρ * L) / A
Where R is the desired resistance (50Ω), ρ is the resistivity of the material (0.020Ωm), L is the length of the resistor, and A is the cross-sectional area of the resistor.
Since the resistor is a cylinder, its cross-sectional area can be expressed as A = π * r^2, where r is the radius of the cylinder.
Given that the length is 5 times the diameter, we can express the radius as r = d / 2 and the length as L = 5d.
Substituting these values into the resistance formula and solving for L, we find that the length should be approximately 17.5 cm.
To learn more about resistor
Click here brainly.com/question/30672175
#SPJ11
A 50 uF capacitor with an initial energy of 1.4 J is discharged through a 8 MO resistor. What is the initial
charge on the capacitor?
The initial charge on the capacitor is 2 × 10⁻⁴ Coulombs.
Capacitance of capacitor, C = 50 μF = 50 × 10⁻⁶ F
Initial energy of capacitor, U = 1.4 J
Resistance, R = 8 MΩ = 8 × 10⁶ Ω
As per the formula of the energy stored in a capacitor, the energy of capacitor can be calculated as
U = 1/2 × C × V²......(1)
Where V is the potential difference across the capacitor.
As per the formula of potential difference across a capacitor,
V = Q/C......(2)
Where,Q is the charge on the capacitor
.So, the formula for energy stored in a capacitor can also be written as
U = Q²/2C.......(3)
Using the above equation (3), we can find the charge on the capacitor.
Q = √(2CU)Q = √(2 × 50 × 10⁻⁶ × 1.4)Q = 2 × 10⁻⁴ Coulombs
Therefore, the initial charge on the capacitor is 2 × 10⁻⁴ Coulombs.
Learn more about capacitor https://brainly.com/question/21851402
#SPJ11
Your friend likes to rub her feet on the carpet and then touch you to give you a shock. While you were trying to escape the shock treatment, you saw a hollow metal cylinder large enough to climb inside. In which of the following cases will you not be shocked? Explain your answer. a. Both of you are outside the cylinder, touching its outer metal surface but not touching each other directly. b. Your friend is inside touching the surface and you are outside touching the outer metal surface. c. You climb inside the hollow cylinder and your charged friend touches the outer surface.
You will not be shocked in case (c) that is `you climb inside the hollow cylinder and your charged friend touches the outer surface` because if you are inside the hollow metal cylinder while your friend is outside. .
A hollow metal cylinder is a conductor, and conductors carry electric current. When your friend rubs her feet on the carpet, she accumulates static electricity. This static electricity can be transferred to you if you are touching her or something that she has touched.
However, if you are inside the hollow metal cylinder, the electric current will flow around the outside of the cylinder and will not be able to reach you. This is because the metal cylinder is a continuous conductor, and electric current cannot flow through a conductor.
In cases a) and b), your friend is touching the metal cylinder, which means that there is a path for the electric current to flow from her to you. Therefore, you can be shocked in these cases.
Here are some additional details about why you will not be shocked in case c):
When your friend touches the outer surface of the cylinder, the electric current flows from her to the cylinder.The electric current then flows around the inside of the cylinder and back to your friend.Since the cylinder is a continuous conductor, the electric current cannot flow through the air to reach you.Therefore, option (c) is the correct answer.
To know more about the hollow metal cylinder refer here,
https://brainly.com/question/21639840#
#SPJ11
A 83-ko pot in traing sites in a centuge that in his seat around a centras. When the setmaving in its chat a speed of 3.5 m/s, he feels a 455-N force bring against his back the seat faces the axis). What is the radius of the centrifuge 0.04 Xm
The radius of the centrifuge is 0.04 meters (m).
In this scenario, a person is seated in a centrifuge that rotates at a certain speed, causing them to experience a force against their back. We need to calculate the radius of the centrifuge based on the given information.
The force experienced by the person can be calculated using the formula for centripetal force:
Force = (Mass × Speed^2) / Radius
Given:
Force = 455 Newtons (N)
Speed = 3.5 meters per second (m/s)
Radius = 0.04 meters (m)
Plugging in the values into the formula, we can rearrange it to solve for the radius:
Radius = (Mass × Speed^2) / Force
Since the mass of the person (83 kg) is not given, we can solve for it by rearranging the formula:
Mass = (Force × Radius) / Speed^2
Mass = (455 N × 0.04 m) / (3.5 m/s)^2
Mass = (18.2 N·m) / 12.25 m^2/s^2
Mass ≈ 1.49 kg
Now that we have the mass, we can substitute it back into the formula for radius:
Radius = (Mass × Speed^2) / Force
Radius = (1.49 kg × (3.5 m/s)^2) / 455 N
Radius ≈ 0.04 m
The radius of the centrifuge is approximately 0.04 meters (m). This calculation is based on the given force experienced by the person (455 N) and the speed of the centrifuge (3.5 m/s). It assumes that the person's mass is 83 kilograms (kg). Please note that the accuracy of the result depends on the accuracy of the given values and assumptions made during the calculation.
To know more about centrifuge visit,
https://brainly.com/question/10472461
#SPJ11
Two electrons are shot out of a double-barreled particle accelerator to the right, one after the other, and move on parallel trajectories. The electron on the top trajectory is fired after the one on the bottom. The top electron is not affected by any outside fields. The bottom electron is affected by a uniform magnetic field, of 2.5T, that acts perpendicularly to the path of the electron. Both electrons begin at rest before being acted upon by a potential difference of 12 V. If the electrons are fired with a distance of 46600 nm of separation, will the electrons collide in a head-on collision after the electron on the bottom is impacted by the magnetic field? Show your work to earn full marks for your answer.
It is possible that the two electrons will collide after the electron on the bottom has been impacted by the magnetic field.
This is because the magnetic field will cause the electron on the bottom trajectory to experience a force perpendicular to its path of motion,
causing it to move in a circular path.
As a result, the electron on the bottom will move in a circle,
while the electron on the top will continue to move in a straight line.
However, the speed of the electrons is required to verify whether they will collide after the electron on the bottom has been impacted by the magnetic field.
According to the problem statement, both electrons were fired with a potential difference of 12 V.
We can use this information to calculate the speed of the electrons.
The formula to use is :
V = √(2qV/m)
where V is the velocity of the electrons,
q is the charge of an electron,
V is the potential difference, and m is the mass of an electron.
Using this formula, we get:
V = √ (2 * 1.602 x 10^-19 C * 12 V / 9.11 x 10^-31 kg)
V = √ (4.804 x 10^-17 J / 9.11 x 10^-31 kg)
V = 6.057 x 10^6 m/s
t = (2π * (magnetic field strength / (charge of an electron))) / V
t = (2π * (2.5 T / (1.602 x 10^-19 C))) / 6.057 x 10^6 m/s
t = 2.098 x 10^-9 s
The distance the electrons must travel is:
d = 7.875 x 10^-6 m + 12.72 μm
d = 7.988 x 10^-6 m
The distance between the electrons is given as 46600 n.
m = 4.66 x 10^-5 m.
it can be concluded that the electrons will not collide after the electron on the bottom is impacted by the magnetic field.
To know more about electrons visit:
https://brainly.com/question/12001116
#SPJ11
What is the speed of light (in m/s) in water? m/s What is the speed of light (in m/s) in carbon disulfide? m/s
The speed of light in carbon disulfide is approximately 183,846,708 m/s. The speed of light in a medium can be calculated using the equation:
v = c / n
where:
v is the speed of light in the medium,
c is the speed of light in vacuum or air (approximately 299,792,458 m/s), and
n is the refractive index of the medium.
For water:
The refractive index of water (n) is approximately 1.33.
Using the equation, we can calculate the speed of light in water:
v_water = c / n
v_water = 299,792,458 m/s / 1.33
v_water ≈ 225,079,470 m/s
Therefore, the speed of light in water is approximately 225,079,470 m/s.
For carbon disulfide:
The refractive index of carbon disulfide (n) is approximately 1.63.
Using the equation, we can calculate the speed of light in carbon disulfide:
v_carbon_disulfide = c / n
v_carbon_disulfide = 299,792,458 m/s / 1.63
v_carbon_disulfide ≈ 183,846,708 m/s
Therefore, the speed of light in carbon disulfide is approximately 183,846,708 m/s.
Learn more about speed:
https://brainly.com/question/13943409
#SPJ11
lectric charges are separated by a finite distance Somewhere en the charges, on the line connecting them, the net electric they produce is zero Part A Do the changes have the same or opposite signs? t
Equal magnitudes, opposite signs, and net electric field cancellation imply charges separated by a finite distance.
If the net electric field produced by charges is zero at some point on the line connecting them, it implies that the charges have equal magnitudes.
However, to achieve this cancellation, the charges must possess opposite signs.
Charges of the same sign would generate electric fields that add up, leading to a non-zero net electric field. Hence, for the net electric field to be nullified, the charges must have opposite signs.
This scenario often occurs when there is an equilibrium point between two charges of equal magnitude but opposite signs, resulting in the cancellation of their electric fields at that specific location.
To know more about electric field, click here:
brainly.com/question/26446532
#SPJ11
The accompanying figure shows a current loop consisting of two concentric circular arcs and two perpendicular radial lines. Determine the magnetic field at point p
To determine the magnetic field at point P in the given figure, we can use the Biot-Savart Law.
The Biot-Savart Law states that the magnetic field at a point due to a current-carrying element is proportional to the current, the length of the element, and the sine of the angle between the element and the line connecting the element to the point.
In this case, we have two current-carrying arcs and two radial lines. Let's consider each part separately:
1. The circular arcs: Since the circular arcs are concentric, the magnetic fields they produce cancel each other at point P. Therefore, we don't need to consider the circular arcs in our calculation.
2. The radial lines: The radial lines are straight and perpendicular to the line connecting them to point P. The magnetic field produced by a straight current-carrying wire at a point on the wire is given by the equation:
B = (μ₀ * I) / (2π * r)
where μ₀ is the permeability of free space, I is the current, and r is the distance from the wire to the point.
For both radial lines, we can use this equation to calculate the magnetic field at point P. The contribution from each line will have a magnitude of:
B_line = (μ₀ * I) / (2π * r_line)
Since the two lines are parallel and carry the same current, their magnetic fields add up. Therefore, the total magnetic field at point P is:
B_total = 2 * B_line = 2 * (μ₀ * I) / (2π * r_line)
Finally, we can substitute the given values into the equation to calculate the magnetic field at point P.
Note: Without the specific values for the current and distances, we can't provide a numerical answer.
Learn more about Biot-Savart Law.:
brainly.com/question/17057080
#SPJ11
A 61-kg person climbs stairs, gaining 19.30 meters in height. Find the work done against gravity to accomplish this task. Show all of work your work below and write your answer here: Joules
The work done against gravity to accomplish climbing the stairs is approximately 11,557.44 Joules (J).
The work done against gravity can be calculated using the formula:
Work = force × distance
In this case, the force is the weight of the person, and the distance is the height gained.
Mass (m) = 61 kg
Height (h) = 19.30 m
Acceleration due to gravity (g) = 9.8 m/s²
The weight (force) of the person can be calculated using the formula:
Weight = mass × acceleration due to gravity
Weight = 61 kg × 9.8 m/s²
Weight = 598.8 N
Now, we can calculate the work done against gravity:
Work = weight × distance
Work = 598.8 N × 19.30 m
Work = 11,557.44 J
Learn more about work done -
brainly.com/question/25573309
#SPJ11
Let S be the solid of revolution obtained by revolving about the x-axis the bounded region R enclosed by the curve y = ³x and the lines x = -1 and y = 0. We compute the volume of S using the disk method. a) Let u be a real number in the interval -1 ≤ x ≤ 1. The section = u of S is a disk. What is the radius and area of the disk? x Radius: Area: b) The volume of S' is given by the integral fo f(x) dx, where: a = Number b = Number and f(x) = c) Find the volume of S with ±0.01 precision. Volume: Number
We compute the volume of S using the disk method. The radius of the disk is u, and the area of the disk is pi*u^2. The volume of S is approximately 1.047 cubic units, with a precision of ±0.01.
a) Let u be a real number in the interval -1 ≤ x ≤ 1. The section = u of S is a disk. What is the radius and area of the disk?
The radius of the disk is u, and the area of the disk is pi*u^2.
b) The volume of S' is given by the integral of f(x) dx, where:
a = -1
b = 1
and f(x) = pi*x^2
c) Find the volume of S with ±0.01 precision.
The volume of S is pi*integral(x^2, -1, 1) = (pi/3) cubic units.
>>> from math import pi
>>> pi*integral(x**2, -1, 1)
3.141592653589793/3
The volume of S is approximately 1.047 cubic units, with a precision of ±0.01.
To learn more about disk method click here
https://brainly.com/question/28184352
#SPJ11
The pendulum of a big clock is 1.449 meters long. In New York City, where the gravitational acceleration is g = 9.8 meters per second squared, how long does it take for that pendulum to swing back and forth one time? Show your work and give your answer in units of seconds
The time it takes for the pendulum to swing back and forth one time is approximately 2.41 seconds.
The time period of a pendulum, which is the time taken for one complete swing back and forth, can be calculated using the formula:
T = 2π√(L/g)
Where:
T is the time period of the pendulumL is the length of the pendulumg is the acceleration due to gravityLet's substitute the given values:
L = 1.449 meters (length of the pendulum)
g = 9.8 meters per second squared (acceleration due to gravity)
T = 2π√(1.449 / 9.8)
T = 2π√0.1476531
T ≈ 2π × 0.3840495
T ≈ 2.41 seconds (rounded to two decimal places)
Therefore, it takes approximately 2.41 seconds for the pendulum to swing back and forth one time.
To learn more about acceleration due to gravity, Visit:
https://brainly.com/question/88039
#SPJ11
Two spheres with uniform surface charge density, one with a radius of 7.1 cm and the other with a radius of 4.2 cm, are separated by a center-to-center distance of 38 cm. The spheres have a combined charge of + 55jC and repel one another with a
force of 0.71 N. Assume that the chargo of the first sphote is
eator than the charge o the second sobore
What is tho surface chargo density on the sobero bi radicie 7 12
The surface charge density can be calculated by using the formula:σ=q/A, where σ = surface charge density, q = charge of a spherical object A = surface area of a spherical object. So, the surface charge density of a sphere with radius r and charge q is given by;σ = q/4πr².
The total charge of the spheres, q1 + q2 = 55 μC. The force of repulsion between the two spheres, F = 0.71 N.
To find, The surface charge density on the sphere with radius 7.1 cm,σ1 = q1/4πr1². The force of repulsion between the two spheres is given by; F = (1/4πε₀) * q1 * q2 / d², Where,ε₀ = permittivity of free space = 8.85 x 10^-12 N^-1m^-2C²q1 + q2 = 55 μC => q1 = 55 μC - q2.
We have two equations: F = (1/4πε₀) * q1 * q2 / d²σ1 = q1/4πr1². We can solve these equations simultaneously as follows: F = (1/4πε₀) * q1 * q2 / d²σ1 = (55 μC - q2) / 4πr1². Putting the values in the first equation and solving for q2:0.71 N = (1/4πε₀) * (55 μC - q2) * q2 / (38 cm)²q2² - (55 μC / 0.71 N * 4πε₀ * (38 cm)²) * q2 + [(55 μC)² / 4 * (0.71 N)² * (4πε₀)² * (38 cm)²] = 0q2 = 9.24 μCσ1 = (55 μC - q2) / 4πr1²σ1 = (55 μC - 9.24 μC) / (4π * (7.1 cm)²)σ1 = 23.52 μC/m².
Therefore, the surface charge density on the sphere with radius 7.1 cm is 23.52 μC/m².
Let's learn more about surface charge density :
https://brainly.com/question/14306160
#SPJ11
A wire has a resistivitiy of 3.00×10 −8
Ωm with a diameter of 600 mm and length of 20,0 m. A) What is the resistance of the wire B) With a 12.0 V battery connected across the ends of the wire, find the current in the wire? c) What is the power loss in the wire?
The resistance of the wire is 6.33 Ω.The current in the wire when a 12.0 V battery is 1.90A..the power loss in the wire is 22.9 W.
The resistance of the wire The resistance of the wire is given by:
R = ρL/A where;ρ is the resistivity of the wire, A is the cross-sectional area of the wire and L is the length of the wire. Substituting the given values,
R = ([tex]3.00 \times 10^{-8}[/tex] Ωm × 20.0 m) / [(π / 4) × (0.6 m)²],
R = 6.33 Ω.
The current in the wire when a 12.0 V battery is connected is given by:I = V/R where;V is the voltage across the wire and R is the resistance of the wire.
Substituting the given values,
I = 12 V / 6.33 Ω.
I = 1.90 A.
Power loss in the wireWhen current flows through a wire, energy is dissipated in the form of heat due to the resistance of the wire. The power loss in the wire is given by:P = I²R where;I is the current through the wire and R is the resistance of the wire.Substituting the given values, P = (1.90 A)² × 6.33 Ω = 22.9 W,
A wire with a resistivity of [tex]3.00 \times 10^{-8}[/tex] Ωm, a diameter of 600 mm and a length of 20.0 m has a resistance of 6.33 Ω. When a 12.0 V battery is connected across the ends of the wire, the current in the wire is 1.90 A. The power loss in the wire is 22.9 W.
The power loss in a wire can be calculated using the formula P = I²R where P is the power loss, I is the current flowing through the wire and R is the resistance of the wire. Alternatively, the power loss can be calculated using the formula P = V²/R where V is the voltage across the wire.
This formula is obtained by substituting Ohm's law V = IR into the formula P = I²R. The power loss in a wire can also be calculated using Joule's law, which states that the power loss is proportional to the square of the current flowing through the wire.
Thus, the power loss in the wire is 22.9 W.
To know more about resistance visit:
brainly.com/question/33728800
#SPJ11
A small light fixture on the bottom of a swimming pool is \( 1.30 \mathrm{~m} \) below the surface. The light emerging from the still water forms a circle on the water surface. What is the diameter of this circle?
The diameter can be determined by doubling the distance of 1.30 m, resulting in a diameter of approximately 2.60 m.
The diameter of the circle formed by the light emerging from the bottom of the swimming pool can be determined by considering the refractive properties of water and the geometry of the situation.
When light travels from one medium (in this case, water) to another medium (air), it undergoes refraction. The angle of refraction depends on the angle of incidence and the refractive indices of the two media.
In this scenario, the light is traveling from water to air, and since the light is emerging from the still water, the angle of incidence is 90 degrees (perpendicular to the surface). The light will refract and form a circle on the water surface.
To determine the diameter of this circle, we can use Snell's law, which relates the angles of incidence and refraction to the refractive indices of the two media. The refractive index of water is approximately 1.33, and the refractive index of air is approximately 1.00.
Applying Snell's law, we find that the angle of refraction in air is approximately 48.76 degrees. Since the angle of incidence is 90 degrees, the light rays will spread out symmetrically in a circular shape, with the point of emergence at the center.
The diameter of the circle formed by the light on the water surface will depend on the distance between the light fixture and the water surface. In this case, the diameter can be determined by doubling the distance of 1.30 m, resulting in a diameter of approximately 2.60 m.
Learn more about Diameter from the given link:
https://brainly.com/question/32968193
#SPJ11
When throwing a ball, your hand releases it at a height of 1.0 m above the ground with velocity 6.8 m/s in direction 61° above the horizontal.
A.) How high above the ground (not your hand) does the ball go?
B.) At the highest point, how far is the ball horizontally from the point of release?
The ball reaches a maximum height of approximately 1.122 meters above the ground.
At the highest point, the ball is approximately 2.496 meters horizontally away from the point of release.
We'll use the vertical component of the initial velocity to determine the maximum height reached by the ball.
Initial vertical velocity (Vy) = 6.8 m/s * sin(61°)
Acceleration due to gravity (g) = 9.8 m/s²
Using the kinematic equation:
Vy^2 = Uy^2 + 2 * g * Δy
Where:
Vy = final vertical velocity (0 m/s at the highest point)
Uy = initial vertical velocity
g = acceleration due to gravity
Δy = change in vertical position (height)
Rearranging the equation, we get:
0 = (6.8 m/s * sin(61°))^2 + 2 * 9.8 m/s² * Δy
Simplifying and solving for Δy:
Δy = (6.8 m/s * sin(61°))^2 / (2 * 9.8 m/s²)
Δy ≈ 1.122 m
Therefore, the ball reaches a maximum height of approximately 1.122 meters above the ground.
b) We'll use the horizontal component of the initial velocity to determine the horizontal distance traveled by the ball.
Initial horizontal velocity (Vx) = 6.8 m/s * cos(61°)
Time taken to reach the highest point (t) = ? (to be calculated)
Using the kinematic equation:
Δx = Vx * t
Where:
Δx = horizontal distance traveled
Vx = initial horizontal velocity
t = time taken to reach the highest point
The time taken to reach the highest point is determined solely by the vertical motion and can be calculated using the equation:
Vy = Uy - g * t
Where:
Vy = final vertical velocity (0 m/s at the highest point)
Uy = initial vertical velocity
g = acceleration due to gravity
Rearranging the equation, we get:
t = Uy / g
Substituting the given values:
t = (6.8 m/s * sin(61°)) / 9.8 m/s²
t ≈ 0.689 s
Now we can calculate the horizontal distance traveled using Δx = Vx * t:
Δx = (6.8 m/s * cos(61°)) * 0.689 s
Δx ≈ 2.496 m
Therefore, at the highest point, the ball is approximately 2.496 meters horizontally away from the point of release.
Learn more about velocity:
https://brainly.com/question/25749514
#SPJ11
This is a two part question. Please answer both parts A and B.
A. Is the following statement True or False: Graded potentials cannot be generated without action potentials.
B. THOROUGHLY explain why you answered true or false to the above statement (i.e. explain the relationship between action potentials and graded potentials and how each is generated).
A. The statement "Graded potentials cannot be generated without action potentials" is False.
B. Graded potentials and action potentials are two distinct types of electrical signals in neurons. They are localized changes in membrane potential that can either be depolarizing (excitatory) or hyperpolarizing (inhibitory). They occur in response to the activation of ligand-gated ion channels or other sensory stimuli. Graded potentials can vary in amplitude and duration, and their strength diminishes as they spread along the neuron.
On the other hand, action potentials are all-or-nothing electrical impulses that propagate along the axon of a neuron. They are generated when a graded potential reaches the threshold level of excitation. Action potentials are initiated by voltage-gated ion channels in the axon hillock, specifically the opening of voltage-gated sodium channels.
The relationship between graded potentials and action potentials is that graded potentials can contribute to the generation of action potentials. Graded potentials serve as the initial input signals that determine whether an action potential will be generated or not. If the depolarization from graded potentials reaches the threshold level, it triggers the opening of voltage-gated sodium channels, leading to the rapid depolarization and initiation of an action potential.
However, it is important to note that graded potentials can occur without necessarily leading to action potentials. Graded potentials can have sub-threshold amplitudes that do not reach the threshold for action potential initiation. In such cases, the graded potentials may cause local changes in membrane potential but do not trigger the all-or-nothing response of an action potential.
In summary, while graded potentials can contribute to the generation of action potentials by reaching the threshold level, they can also occur independently without resulting in action potentials if their amplitudes are sub-threshold. Therefore, the statement is False.
To know more about Graded potentials here: https://brainly.com/question/29752768
#SPJ11
A 2.860 kg, 60.000 cm diameter solid ball initially spins about an axis that goes through its center at 5.100 rev/s. A net torque of 1.070 N.m then makes the ball come to a stop. The net work done by the net torque on the ball to make it come to rest, in Joules and to three decimal places, is
The net work done by the net torque on the ball to make it come to rest is approximately -8.422 Joules.
To find the net work done by the net torque on the ball to make it come to rest, we need to use the rotational kinetic energy equation:
K_rot = (1/2) * I * ω²
Where:
K_rot is the rotational kinetic energy
I is the moment of inertia of the ball
ω is the angular velocity
The moment of inertia of a solid sphere rotating about its axis of symmetry can be calculated using the formula:
I = (2/5) * m * r²
Where:
m is the mass of the ball
r is the radius of the ball
Given:
Mass of the ball (m) = 2.860 kg
Diameter of the ball = 60.000 cm
Angular velocity (ω) = 5.100 rev/s
First, we need to convert the diameter of the ball to its radius:
Radius (r) = Diameter / 2 = 60.000 cm / 2 = 30.000 cm = 0.300 m
Now, we can calculate the moment of inertia (I) using the formula:
I = (2/5) * m * r² = (2/5) * 2.860 kg * (0.300 m)²
I = 0.3432 kg·m²
Next, we can calculate the initial rotational kinetic energy (K_rot_initial) using the given angular velocity:
K_rot_initial = (1/2) * I * ω² = (1/2) * 0.3432 kg·m² * (5.100 rev/s)²
K_rot_initial = 8.422 J
Since the net torque causes the ball to come to rest, the final rotational kinetic energy (K_rot_final) is zero. The net work done by the net torque can be calculated as the change in rotational kinetic energy:
Net Work = K_rot_final - K_rot_initial = 0 - 8.422 J
Net Work = -8.422 J
Therefore, the net work done by the net torque on the ball to make it come to rest is approximately -8.422 Joules (to three decimal places).
To know more about work done refer here
https://brainly.com/question/32263955#
#SPJ11
For a wavelength of 420 nm, a diffraction grating produces a bright fringe at an angle of 26◦ . For an unknown wavelength, the same grating produces a bright fringe at an angle of 41◦ . In both cases the bright fringes are of the same order m. What is the unknown wavelength?
For a wavelength of 420 nm, a diffraction grating produces a bright fringe at an angle of 26◦. The unknown wavelength that produces a bright fringe at an angle of 41◦ is 550nm.
To solve this problem, we can use the formula for the diffraction pattern produced by a grating:
m * λ = d * sin(θ)
Where:
m is the order of the bright fringe,
λ is the wavelength of light,
d is the grating spacing (distance between adjacent slits), and
θ is the angle at which the bright fringe is observed.
λ₁ = 420 nm (wavelength for the first case),
θ₁ = 26° (angle for the first case),
θ₂ = 41° (angle for the second case),
m is the same for both cases.
Using the formula for the diffraction pattern:
m * λ₁ = d * sin(θ₁) ... (1)
m * λ₂ = d * sin(θ₂) ... (2)
Dividing equation (2) by equation (1):
(λ₂ / λ₁) = (sin(θ₂) / sin(θ₁))
Substituting the given values:
(λ₂ / 420 nm) = (sin(41°) / sin(26°))
Now let's solve for λ₂:
λ₂ = (420 nm) * (sin(41°) / sin(26°))
Calculating the value:
λ₂ ≈ 549.99 nm
Rounding to the nearest whole number, the unknown wavelength is approximately 550 nm.
Therefore, the correct answer is 550 nm.
Learn more about diffraction here:
https://brainly.com/question/8645206
#SPJ11
1. In the following diagram, draw the direction of the total electric field at points P1, P2, and P3. Assume that each circle is equally negatively charged. Draw the field as individual vectors. 2 P1 The electric field should I.. have a single P3 -Due to proximity I all of Pls vectors in the top two circles split them because ave seemingly the distance/strength to the for one l the closer ones just take these (P2 Simarily. Since ball is so close! will oveppover the of the other 2 a P2 should prob I thought the
The figure is not given in the question. Hence, I will provide a general idea on how to draw the direction of the total electric field at points P1, P2, and P3.
Consider that the following diagram is the representation of the situation described in the question. [tex]\sf{Figure~1:~Circle~with~a~negative~charge}[/tex]The above figure represents a circle with a negative charge. Similarly, there can be other circles that are equally negatively charged as mentioned in the question. For the following diagram, the direction of the total electric field at points P1, P2, and P3 can be shown as follows: The electric field at point P1 due to all the circles is the total electric field. The direction of the total electric field can be represented using an arrow as shown in the figure below.[tex]\sf{Figure~2:~Electric~field~at~point~P1}[/tex]Similarly, the direction of the total electric field at points P2 and P3 can also be represented. The distance/strength of the electric field is represented using the length of the arrow. The stronger the electric field, the longer is the arrow.
To know more about electric field , visit;
https://brainly.com/question/19878202
#SPJ11
A baseball player is running with a speed of 7 m/s towards home base. The player slides the final 5 meters and comes to a stop, directly over the plate. What is the approximate coefficient of friction
The approximate coefficient of friction is approximately -0.25.
The force of kinetic friction can be calculated using the equation [tex]F_{friction} = \mu_k N[/tex], where [tex]F_{friction}[/tex] is the force of kinetic friction, [tex]\mu_k[/tex] is the coefficient of kinetic friction, and N is the normal force.
In this scenario, the player comes to a stop, indicating that the force of kinetic friction is equal in magnitude and opposite in direction to the force exerted by the player.
We know that the player's initial velocity is 7 m/s and the distance covered while sliding is 5 meters.
To calculate the deceleration (negative acceleration) experienced by the player, we can use the equation [tex]v^2 = u^2 + 2as[/tex]
where v is the final velocity (0 m/s), u is the initial velocity (7 m/s), a is the acceleration, and s is the displacement (5 meters).
Rearranging the equation, we have [tex]a=\frac{v^{2}-u^{2} }{2s}[/tex].
Plugging in the given values, we get [tex]a=\frac{0-(7^2)}{2\times 5} =-2.45 m/s^2[/tex].
Since the force of friction opposes the player's motion, we can assume it has the same magnitude as the force that brought the player to a stop. This force is given by the equation
[tex]F_{friction} = ma[/tex], where m is the mass of the player.
The normal force acting on the player is equal to the player's weight, N = mg, where g is the acceleration due to gravity.
Now, we can substitute the values into the equation [tex]F_{friction} = \mu_kN[/tex]and solve for the coefficient of kinetic friction:
[tex]ma = \mu_k mg[/tex].
The mass of the player cancels out, leaving us with [tex]a = \mu_k g[/tex].
Substituting the calculated acceleration and the acceleration due to gravity, we have [tex]-2.45 m/s^2 = \mu_k 9.8 m/s^2[/tex].
Solving for [tex]\mu_k[/tex], we find [tex]\mu_k = \frac{(-2.45)}{(9.8)} \approx -0.25[/tex].
Thus, the approximate coefficient of friction is approximately -0.25.
Learn more about friction here: brainly.com/question/24338873
#SPJ11
A hiker walks 30.0 km in a direction of 25 ∘ South of West and then 45.5 km in a direction of 72 ∘ North of West. Find the resultant displacement.
The resultant displacement of the hiker is approximately 69.51 km in a direction of 52.49° north of west. To find the resultant displacement of the hiker, we can break down the displacements into their components and then add them together.
Displacement 1: 30.0 km in a direction of 25° South of West
The horizontal component is given by 30.0 km * cos(25°) in the westward direction.
The vertical component is given by 30.0 km * sin(25°) in the southward direction.
Displacement 2: 45.5 km in a direction of 72° North of West
The horizontal component is given by 45.5 km * cos(72°) in the westward direction.
The vertical component is given by 45.5 km * sin(72°) in the northward direction.
Displacement 1:
Horizontal component = 30.0 km * cos(25°) = 30.0 km * cos(25°) = 26.97 km (westward)
Vertical component = 30.0 km * sin(25°) = 30.0 km * sin(25°) = 12.77 km (southward)
Displacement 2:
Horizontal component = 45.5 km * cos(72°) = 45.5 km * cos(72°) = 15.65 km (westward)
Vertical component = 45.5 km * sin(72°) = 45.5 km * sin(72°) = 42.50 km (northward)
Now, we can add the horizontal and vertical components separately to find the resultant displacement:
Horizontal component = 26.97 km + 15.65 km = 42.62 km (westward)
Vertical component = 12.77 km + 42.50 km = 55.27 km (northward)
To find the magnitude and direction of the resultant displacement, we can use the Pythagorean theorem and trigonometric functions:
Magnitude of the resultant displacement = sqrt((Horizontal component)^2 + (Vertical component)^2)
Direction of the resultant displacement = atan(Vertical component / Horizontal component)
Magnitude of the resultant displacement = sqrt((42.62 km)^2 + (55.27 km)^2) = 69.51 km
Direction of the resultant displacement = atan(55.27 km / 42.62 km) ≈ 52.49°
Therefore, the resultant displacement of the hiker is approximately 69.51 km in a direction of 52.49° north of west.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ11
quick answer please
QUESTION 3 In order for a magnetic force to exist between a source charge and a test charge a. both the source charge and the test charge must be moving. b. the source charge must be stationary, but t
In order for a magnetic force to exist between a source charge and a test charge, both the source charge and the test charge must be moving. This statement is not true (option d).
Instead, the correct option is: d. the source charge must be moving, but the test charge can be either moving or stationary. Magnetic force is one of the four fundamental forces of nature. It is a force that is exerted by a magnetic field on a moving charge, such as an electron or a proton. The force is perpendicular to the direction of motion of the charge and to the direction of the magnetic field. It is also proportional to the charge and to the speed of the charge.
The mathematical expression for the magnetic force is given by:
Fm = qvBsinθ
whereFm is the magnetic force,q is the charge,v is the velocity of the charge,B is the strength of the magnetic field, andθ is the angle between the velocity and the magnetic field.
Therefore, the correct answer is d. the source charge must be moving, but the test charge can be either moving or stationary.
To know more about magnetic:
https://brainly.com/question/3617233
#SPJ11
A parallel plate has an area 1.0x10°m and a plate separation of 3.00 mm. Find: a) the capacitance b) the charge on each plate if a 12-V battery is connected to the capacitor,
The capacitance of the parallel plate capacitor is approximately 2.95 microfarads. The charge on each plate of the capacitor is approximately 3.54 x 10⁻⁵ coulombs (C).
a) To find the capacitance (C) of the parallel plate capacitor, we can use the formula:
C = ε₀ × (A/d)
where:
C is the capacitance,
ε₀ is the permittivity of free space (approximately 8.85 x 10⁻¹² F/m),
A is the area of the plates,
d is the separation distance between the plates.
A = 1.0 x 10⁻⁶ m²
d = 3.00 x 10⁻³ m
Substituting the values into the formula:
C = (8.85 x 10⁻¹² F/m) × (1.0 x 10⁻⁶ m²) / (3.00 x 10⁻³ m)
C ≈ 2.95 x 10⁻⁶ F
b) To find the charge (Q) on each plate when a 12-V battery is connected, we can use the formula:
Q = C × V
where:
Q is the charge,
C is the capacitance,
V is the voltage applied.
C = 2.95 x 10⁻⁶ F
V = 12 V
Substituting the values into the formula:
Q = (2.95 x 10⁻⁶ F) × (12 V)
Q = 3.54 x 10⁻⁵ C
Learn more about capacitance -
brainly.com/question/30529897
#SPJ11
A spring is attached at the left end on a horizontal frictionless tabletop; the right end is attached to a mass m=0.86 kg. The spring has a spring constant of 74.5 N/m. The mass is pulled 9.65 cm to the right and released. a) Find the angular frequency of oscillation. b) Find the period. c) Find the total energy of the system. Enter onty the part c) answer on moodle.
To find the angular frequency of oscillation, we can use the formula ω = √(k/m), where ω is the angular frequency, k is the spring constant, and m is the mass. The total energy is the sum of the potential and kinetic energies.
The period of oscillation can be determined using the formula T = 2π/ω, where T is the period and ω is the angular frequency. Finally, the total energy of the system can be calculated by finding the sum of the potential energy and the kinetic energy.
a) The angular frequency of oscillation can be calculated using the formula ω = √(k/m), where k is the spring constant and m is the mass. Substituting the given values of k = 74.5 N/m and m = 0.86 kg, we can calculate ω.
b) The period of oscillation can be found using the formula T = 2π/ω, where T is the period and ω is the angular frequency calculated in part (a).
c) The total energy of the system can be determined by summing the potential energy and the kinetic energy. The potential energy of a spring is given by the formula PE = (1/2)kx², where k is the spring constant and x is the displacement from the equilibrium position. The kinetic energy is given by KE = (1/2)mv², where m is the mass and v is the velocity. The total energy is the sum of the potential and kinetic energies.
To learn more about mass click here: brainly.com/question/19385703
#SPJ11
The plot below shows the vertical displacement vs horizontal position for a wave travelling in the positive x direction at time equal 0s(solid) and 2s(dashed). Which one of the following equations best describes the wave?
The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.
In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.
The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.
Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.
Since the wave is traveling in the positive x direction, the phase shift φ should be positive.
To learn more about phase shift click here:
brainly.com/question/23959972
#SPJ11