A source of EM radiation with frequency f = 5.8 × 10^14 Hz strikes a metal sheet with unknown work function W. The
stopping voltage required to bring all the ejected electrons
to a halt is measured to be V; = 0.28 V. If a different source
with frequency f2 = 6.4 x 10^14 Hz strikes the same metal sheet, what stopping voltage V will be required? As part of the representation, draw a graph with the EM radiation's frequency on the 2-axis and the stopping voltage on the
y-axis.

Lenz's law is a basic principle of electromagnetism that specifies the direction of induced current that is produced by a change in magnetic field. According to Lenz's law, the direction of the induced current in a circuit must flow in such a way as to oppose the change in magnetic flux.

In other words, the induced current should flow in such a way that it produces a magnetic field that opposes the change in magnetic field that produced the current. This concept is based on the conservation of energy and the principle of electromagnetic induction.

Lenz's law is an important principle that has many practical applications, especially in the design of electrical machines and devices.

For example, Lenz's law is used in the design of transformers, which are devices that convert electrical energy from one voltage level to another by using the principles of electromagnetic induction.

Lenz's law is also used in the design of electric motors, which are devices that convert electrical energy into mechanical energy by using the principles of electromagnetic induction.

To know more about electromagnetism visit:

https://brainly.com/question/31038220

#SPJ11

The time it takes for the salad spinner basket to stop is approximately 6.19 seconds.

To calculate the time it takes for the salad spinner basket to stop, we need to consider the torque produced by the frictional force applied to the outer edge of the basket. The torque will cause the angular acceleration, which will gradually reduce the angular velocity of the basket until it comes to a stop.

The torque produced by the frictional force can be calculated using the equation τ = μ * F * r, where τ is the torque, μ is the coefficient of kinetic friction, F is the applied force, and r is the radius of the spinning basket.

The radius of the basket is 0.15 m, the coefficient of kinetic friction is 0.35, and the force applied is 5 N, we can calculate the torque as follows: τ = 0.35 * 5 N * 0.15 m.

Next, we can use the rotational inertia of the basket to relate the torque and angular acceleration. The torque is equal to the product of the rotational inertia and the angular acceleration, τ = I * α.

Rearranging the equation, we have α = τ / I.

Plugging in the values, α = (0.35 * 5 N * 0.15 m) / 0.1 kg-m².

Finally, we can use the formula to find the time it takes for the angular velocity to reduce to zero, given by ω = ω₀ + α * t, where ω is the final angular velocity, ω₀ is the initial angular velocity, α is the angular acceleration, and t is the time.

Since the final angular velocity is zero, we have 0 = 26 rad/s + (0.35 * 5 N * 0.15 m) / 0.1 kg-m² * t.

Solving for t, we find t = -26 rad/s / [(0.35 * 5 N * 0.15 m) / 0.1 kg-m²]. Note that the negative sign is because the angular velocity decreases over time.

Calculating the value, we get t ≈ -6.19 s. Since time cannot be negative, the time it takes for the basket to stop is approximately 6.19 seconds.

learn more about "angular velocity":- https://brainly.com/question/20432894

#SPJ11

The resultant force is 12.6N at a bearing of 3°W of N. The direction of motion of the body is the same as the direction of the resultant force, which is 3°W of N.

A triangle of vectors can be used to solve vector addition problems, such as determining the resultant force and direction of motion of a body acted upon by two or more vectors.

Let's use this method to solve the given problem: Two vectors, 10N and 8N, act on a body on bearings 285° and N70°E respectively.

Using the triangle of vectors, we can determine the resultant force and direction of motion of the body.

1. Draw a diagram to scale, showing the two vectors and their respective bearings.

2. Begin by drawing the first vector, 10N, from the origin at bearing 285°.

3. Draw the second vector, 8N, from the end of the first vector at bearing N70°E.

4. Draw the third vector, the resultant force, from the origin to the end of the second vector.

5. Use a protractor and ruler to measure the magnitude and bearing of the resultant force.

The diagram is shown below: Triangle of vectors diagram using the two vectors 10N and 8N, with bearings 285° and N70°E respectively.

The third vector, the resultant force, is drawn from the origin to the end of the second vector.

The magnitude and bearing of the resultant force are found using a protractor and ruler.

6. Measure the magnitude of the resultant force using the ruler.

In this case, the magnitude is approximately 12.6N.

7. Measure the bearing of the resultant force using the protractor.

In this case, the bearing is approximately 3°W of N.

Therefore, the resultant force is 12.6N at a bearing of 3°W of N.

The direction of motion of the body is the same as the direction of the resultant force, which is 3°W of N.

Therefore, the body will move in this direction.

For more questions on resultant force

https://brainly.com/question/30007883

#SPJ8

The statement that best explains why a telescope enables us to see details of a distant object such as the Moon or a planet more clearly is: The image formed by the telescope is larger than the object.

Telescope enables us to see details of a distant object such as the Moon or a planet more clearly because the image formed by the telescope is larger than the object. It is because the image is formed by the convergence of light rays from the object at a single point and at the same distance from the lens of the telescope. This forms an enlarged and more detailed view of the object, which helps in seeing it more clearly. This is how a telescope magnifies the image of a distant object.
The other options do not explain why a telescope enables us to see details of a distant object such as the Moon or a planet more clearly. The statement "The image formed by the telescope extends a larger angle at the eye than the object does" is incorrect because a telescope does not extend the angle at the eye. The statement "The telescope can also collect radio waves that sharpen the visual image" is also incorrect because telescopes cannot collect radio waves, radio telescopes are specifically designed to do this.
Justification: The correct answer for the previous question is Light Gathering Power. Light gathering power is a measure of the ability of a telescope to collect light. The larger the telescope's light gathering power, the more light it can collect, which enables it to form a brighter and more detailed image of the object being observed. This is important because the more light the telescope collects, the greater the amount of detail that can be seen.

To know more about telescope visit :

https://brainly.com/question/19349900

#SPJ11

The change in the ball's kinetic energy when it accelerates from 4.0 m/s^2 to 8 m/s^2 is 64 Joules.

To calculate the change in kinetic energy, we need to determine the initial and final kinetic energies and then find the difference between them.

The formula for kinetic energy is given by:

Kinetic Energy = [tex](1/2) * mass * velocity^2[/tex]

Mass of the ball (m) = 1 kg

Initial acceleration (a₁) = 4.0 m/s²

Final acceleration (a₂) = 8 m/s²

Let's calculate the initial and final velocities using the formula of accelerated motion:

v = u + a * t

For initial velocity:

u = 0 (assuming the ball starts from rest)

a = a₁ = 4.0 m/s²

t = 1 second (arbitrary time interval for convenience)

Using the formula, we find:

v₁ = u + a₁ * t

v₁ = 0 + 4.0 * 1

v₁ = 4.0 m/s

For final velocity:

u = v₁ (the initial velocity is the final velocity from the previous calculation)

a = a₂ = 8 m/s²

t = 1 second (again, an arbitrary time interval for convenience)

Using the formula, we find:

v₂ = u + a₂ * t

v₂ = 4.0 + 8 * 1

v₂ = 12.0 m/s

Now, we can calculate the initial and final kinetic energies using the formula mentioned earlier:

Initial Kinetic Energy (KE₁) = (1/2) * m * v₁^2

KE₁ = (1/2) * 1 * 4.0^2

KE₁ = 8.0 J (Joules)

Final Kinetic Energy (KE₂) = (1/2) * m * v₂^2

KE₂ = (1/2) * 1 * 12.0^2

KE₂ = 72.0 J (Joules)

Finally, we can determine the change in kinetic energy:

Change in Kinetic Energy = KE₂ - KE₁

Change in Kinetic Energy = 72.0 J - 8.0 J

Change in Kinetic Energy = 64.0 J (Joules)

Therefore, the change in the ball's kinetic energy when it accelerates from 4.0 m/s² to 8 m/s² is 64.0 Joules.

To learn more about kinetic energy click here:

brainly.com/question/999862

#SPJ11

In both cases, the clock attached to the car measures coordinate time, which is the time measured by a single clock in a given frame of reference.

Given that,Distance traveled by the car = 300 km = 3 × 10² km

Speed of the car = 4.32 × 10⁸ km/hr

Case 1:

(a) Velocity of the person in SR Units

The velocity of the car in SI unit = (4.32 × 10⁸ × 1000) / 3600 m/s = 120,000 m/s

The velocity of the person = 0 m/s

Relative velocity = v/c = (120,000 / 3 × 10⁸) = 0.4 SR Units

(b) Distance (with respect to the earth) traveled in SR units

Proper distance = L = 300 km = 3 × 10² km

Proper distance / Length contraction factor L' = L / γ = (3 × 10²) / (1 - 0.4²) = 365.8537 km

Distance traveled in SR Units = L' / (c x T) = 365.8537 / (3 × 10⁸ x 0.4) = 3.0496 SR Units

(c) Time for the trip as measured by someone on the earth

Time interval, T = L' / v = 365.8537 / 120000 = 0.003048 SR Units

Time measured by someone on Earth = T' = T / γ = 0.004807 SR Units

(d) Car's space-time interval

The spacetime interval, ΔS² = Δt² - Δx²

where Δt = TΔx = v x TT = 0.003048 SR Units

Δx = 120000 × 0.003048 = 365.76 km

ΔS² = (0.003048)² - (365.76)² = - 133,104.0799 SR Units²

(e) Spacetime diagramCase 2:If the car instead accelerated from rest to reach point B.(g) The possible worldline for the car using a dashed line ("---")Considering Cases 1 and 2:(h) In which case(s) does a clock attached to the car measure proper time? Explain briefly.In Case 2, as the car is accelerating from rest, it is under the influence of an external force and a non-inertial frame of reference.

Thus, the clock attached to the car does not measure proper time in Case 2.In Case 1, the clock attached to the car measures proper time as the car is traveling at a constant speed. Thus, the time interval measured by the clock attached to the car is the same as the time measured by someone on Earth.(i) In which case(s) does a clock attached to the car measure spacetime interval?

To know  more about Distance visit:

https://brainly.com/question/26550516

#SPJ11

If the Magnetic Force of wire 1 on wire 2 is 3.6 x 10-2 N and each wire is 36 meters long then, the two parallel wires must be 2 meters apart from each other.

The formula to calculate the magnetic force between two parallel conductors is given as : F = µI₁I₂l / 2πd

where

F is the magnetic force

µ is the permeability of free space, µ = 4π x 10-7 TmA-1

I₁ is the current flowing in the first conductor

I₂ is the current flowing in the second conductor

l is the length of the conductors

d is the distance between the conductors

In the given problem, we have :

I₁ = 5 Amps ; I₂ = 10 Amps ; F = 3.6 x 10-2 N ; l = 36 meters

The value of permeability of free space, µ = 4π x 10-7 TmA-1

We can rearrange the above formula to find the value of d as : d = µI₁I₂l / 2πF

Substituting the given values, we get, d= 2m

Therefore, the two parallel wires must be 2 meters apart from each other.

To learn more about current :

https://brainly.com/question/1100341

#SPJ11

The power that has to be supplied to the rope to generate harmonic waves at a frequency of 60Hz and an amplitude of 6cm is 251W. Option b. 251W is correct.

To calculate the power required to generate harmonic waves on the rope, we can use the formula:

P = (1/2) * μ * v * ω^2 * A^2

Where:

First, let's calculate the velocity of the wave. For a wave on a stretched rope, the velocity is given by:

v = √(T/μ)

Where T is the tension in the rope (N).

Given:

Calculating the velocity:

v = √(T/μ) = √(80 / (5 × 10^2)) = √(16/100) = 0.4 m/s

Calculating ω:

ω = 2πf = 2π(60) = 120π rad/s

Now, substituting the values into the power formula:

P = (1/2) * μ * v * ω^2 * A^2

= (1/2) * (5 × 10^2) * (0.4) * (120π)^2 * (6/100)^2

≈ 251 W

Therefore, the power that has to be supplied to the rope to generate harmonic waves at a frequency of 60 Hz and an amplitude of 6 cm is approximately 251 W. Therefore, option b. 251W is the correct answer.

The complete question should be:

A stretched rope having linear mass density 5×10²kgm⁻¹ is under a tension of 80N. The power that has to be supplied to the rope to generate harmonic waves at a frequency of 60Hz and an amplitude of 6cm is

a. 215W

b. 251W

c. 512W

d. 521W

To learn more about  harmonic waves, Visit:

https://brainly.com/question/33192840

#SPJ11

Light has been a matter of extensive research, and experiments have led to various hypotheses regarding the nature of light. The two most notable hypotheses are the wave model and the particle model of light.

These models explain the behavior of light concerning the properties of waves and particles, respectively. Here are the observations for each model:a) Wave model: The light can travel through a vacuum.b) Wave model: The speed of the light is less in water than in air.c) Wave model

e) Wave model: The light can be simultaneously reflected and transmitted at certain interfaces.None of the observations contradicts the wave model of light. In fact, all the above observations are consistent with the wave model of light.The correct answer is d) The beam of light travels in a straight line. This observation is consistent with the particle model of light.

To know more about extensive visit:

https://brainly.com/question/12937142

#SPJ11

The space station is rotating at approximately 0.887 rpm to produce Earth-normal artificial gravity.

To calculate the speed of the space station rotating to produce Earth-normal artificial gravity, we can use the centripetal acceleration formula:

ac = ω²r

where ac is the centripetal acceleration, ω is the angular velocity, and r is the radius of the space station.

We know that ac is equal to the acceleration due to gravity (g). Substituting the given values, we have:

g = ω²r

Solving for ω, we get:

ω = sqrt(g / r)

Plugging in the values:

g = 9.81 m/s²

r = 557 m

ω = sqrt(9.81 / 557) ≈ 0.166 rad/s

To convert this angular velocity to revolutions per minute (rpm), we can use the conversion factor of 1 revolution = 2π radians, and there are 60 seconds in a minute:

ω_rpm = (0.166 rad/s) * (1 revolution / 2π rad) * (60 s / 1 min) ≈ 0.887 rpm

To know more about space station refer to-

https://brainly.com/question/14547200

#SPJ11

The current flowing through the loop is approximately 0.992 Amperes. The rate of change of magnetic field is given as 9.00E-3 T/s. Therefore, the rate of change of magnetic flux is:
dΦ/dt = (9.00E-3 T/s) * 0.3848 m^2 = 3.4572E-3 Wb/s

The current in the loop can be determined by using Faraday's law of electromagnetic induction. According to the law, the induced electromotive force (emf) is equal to the rate of change of magnetic flux through the loop. The emf can be calculated as: ε = -N * dΦ/dt. where ε is the induced emf, N is the number of turns in the coil, and dΦ/dt is the rate of change of magnetic flux.The magnetic flux (Φ) through the loop is given by: Φ = B * A. where B is the magnetic field strength and A is the area of the loop.Given that the coil has a diameter of 35.0 cm and consists of 24 turns, we can calculate the area of the loop: A = π * (d/2)^2. where d is the diameter of the coil.
Substituting the values, we get: A = π * (0.35 m)^2 = 0.3848 m^2

The rate of change of magnetic field is given as 9.00E-3 T/s. Therefore, the rate of change of magnetic flux is:
dΦ/dt = (9.00E-3 T/s) * 0.3848 m^2 = 3.4572E-3 Wb/s

Now, we can calculate the induced emf:
ε = -N * dΦ/dt = -24 * 3.4572E-3 Wb/s = -0.08297 V/s

Since the coil is made of copper, which has low resistance, we can assume that the induced emf drives the current through the loop. Therefore, the current flowing through the loop is: I = ε / R

To calculate the resistance (R), we need the length (L) of the wire and its cross-sectional area (A_wire).The cross-sectional area of the wire can be calculated as:
A_wire = π * (d_wire/2)^2

Given that the wire diameter is 2.60 mm, we can calculate the cross-sectional area: A_wire = π * (2.60E-3 m/2)^2 = 5.3012E-6 m^2

The length of the wire can be calculated using the formula:

L = N * circumference

where N is the number of turns and the circumference can be calculated as: circumference = π * d

L = 24 * π * 0.35 m = 26.1799 m

Now we can calculate the resistance: R = ρ * L / A_wire

where ρ is the resistivity of copper (1.7E-8 Ω*m).

R = (1.7E-8 Ω*m) * (26.1799 m) / (5.3012E-6 m^2) = 8.3741E-2 Ω

Finally, we can calculate the current:

I = ε / R = (-0.08297 V/s) / (8.3741E-2 Ω) = -0.992 A

Therefore, the current flowing through the loop is approximately 0.992 Amperes.

To learn more about current:

https://brainly.com/question/31315986

#SPJ11

To achieve a circular orbit just over the surface of the planet, the projectile must have a specific velocity.

Using the equation for circular motion, v² = GM / r, where G is the gravitational constant, M is the mass of the Earth, and r is the radius of the Earth, we can calculate the required velocity.

Substituting the given values into the equation, we have v² = (6.67 x 10^-11 Nm²/kg² x 5.98 x 10^24 kg) / (6.38 x 10^6 m)². Simplifying this expression yields v² = 398600.5 m²/s². Taking the square root of both sides, we find that v ≈ 6301.9 m/s.

Therefore, in order for the projectile to orbit just over the surface of the planet, it needs to be fired with an initial velocity of approximately 6301.9 m/s.

If, on the other hand, we want the projectile to escape from the Earth's gravitational pull, we need to determine the escape velocity. The escape velocity is the speed required for an object to overcome the gravitational force and break free from the planet's gravitational field.

Using the escape velocity formula v = √(2GM / r), where G, M, and r are the same as before, we can calculate the escape velocity. Substituting the values into the equation, we have v = √(2 x 6.67 x 10^-11 Nm²/kg² x 5.98 x 10^24 kg / 6.38 x 10^6 m). Simplifying this expression, we find that v ≈ 11186 m/s.

Hence, to escape from the Earth's gravitational pull, the projectile must be fired with an initial velocity of approximately 11186 m/s.

In summary, to orbit just over the surface of the planet, the projectile needs an initial velocity of 6301.9 m/s, while to escape from the Earth's gravitational pull, it requires an initial velocity of 11186 m/s.

To learn more about the concepts of orbital velocity, escape velocity, you can visit the following link:

brainly.com/question/13842095

#SPJ11

In an inelastic collision between two lumps of matter, each with a mass of 1,500 kg and a speed of 0.880, the final speed of the combined lump is not 0.44 times the speed of light (e). The final mass of the combined lump immediately after the collision is not 2.45 m.

Final Speed: The final speed of the combined lump in an inelastic collision cannot be determined using the given information.

It requires additional data, such as the nature of the collision and the relative velocities of the lumps. Without this information, it is not possible to calculate the final speed as a fraction of the speed of light (e).

Final Mass: The final mass of the combined lump can be calculated by adding the individual masses together.

Since both lumps have a mass of 1,500 kg, the combined mass of the lump immediately after the collision would be 3,000 kg. There is no indication of a factor or value (2.45 m) that affects the calculation of the final mass, so it remains at 3,000 kg.

To learn more about inelastic collision

Click here brainly.com/question/14521843

#SPJ11

The expected outlet temperature of oil is 48.24°C.

Given Data:

Length of heat exchanger, L = 8 m

Mass flow rate of water, mw = 2.5 kg/s

Inlet temperature of water, Tw1 = 10°C

Outlet temperature of water, Tw2 = 10.7°C

Mass flow rate of oil, mo = 0.2 kg/s

Inlet temperature of oil, To1 = 140°C (T1)

Type of copper tube, Std. type M (Copper)

Therefore, the expected outlet temperature of oil can be determined by the formula for overall heat transfer coefficient and the formula for log mean temperature difference as below,

Here, U is the overall heat transfer coefficient,

A is the surface area of the heat exchanger, and

ΔTlm is the log mean temperature difference.

On solving the above equation we can determine ΔTlm.

Therefore, the temperature of the oil at the outlet can be determined using the formula as follows,

Here, To2 is the expected outlet temperature of oil.

Therefore, on substituting the above values in the equation, we get:

Thus, the expected outlet temperature of oil is 48.24°C.

Learn more about temperature, here

https://brainly.com/question/1461624

#SPJ11

The amplitude of oscillation of an undamped 1.92 kg horizontal spring oscillator with a spring constant of 21.4 N/m and a speed of 2.56 m/s as it passes through its equilibrium position is 0.407 meters.

The amplitude of an oscillation is defined as the maximum displacement from the equilibrium position or mean position of the particle or object in oscillation.What is the formula for amplitude?The amplitude A of a particle in oscillation is given by:A = (2KE/mω2)1/2where KE is the kinetic energy of the particle,m is the mass of the particle, andω is the angular frequency of the oscillation.

The angular frequency is defined as the number of radians per second by which the object rotates or oscillates. It is usually represented by the symbol ω.What is the kinetic energy of the particle?The kinetic energy of the particle is given by:KE = 0.5mv2where m is the mass of the particle, andv is the velocity of the particle.

Given data,Mass of the oscillator, m = 1.92 kgSpring constant, k = 21.4 N/mSpeed of the oscillator, v = 2.56 m/sThe formula for the amplitude of oscillation is:A = (2KE/mω2)1/2The formula for the angular frequency of the oscillation is:ω = (k/m)1/2The formula for the kinetic energy of the particle is:KE = 0.5mv2Substitute the given values in the above formulas to get the value of amplitude as follows:

ω = (k/m)1/2

ω = (21.4 N/m ÷ 1.92 kg)1/2ω = 3.27 rad/s

KE = 0.5mv2

KE = 0.5 × 1.92 kg × (2.56 m/s)2

KE = 5.19 J

Now,A = (2KE/mω2)1/2

A = (2 × 5.19 J ÷ 1.92 kg × (3.27 rad/s)2)1/2

A = 0.407 m

Therefore, the amplitude of oscillation is 0.407 meters.

To know more about amplitude:

https://brainly.com/question/9525052

#SPJ11

1.20 seconds after firing, the projectile is moving upward and also in the positive x-direction horizontally.

To determine the direction of motion of the projectile 1.20 seconds after firing, we need to consider the vertical and horizontal components of its motion separately.

First, let's analyze the vertical component of motion. The projectile experiences a downward acceleration due to gravity. The vertical velocity of the projectile can be calculated using the formula:

v_vertical = v_initial * sin(theta)

where v_initial is the initial speed of the projectile and theta is the launch angle. Plugging in the given values:

v_vertical = 49.6 m/s * sin(42.2°)

v_vertical ≈ 33.08 m/s (upward)

Since the vertical velocity component is positive, the projectile is moving in an upward direction.

Next, let's consider the horizontal component of motion. The horizontal velocity of the projectile remains constant throughout its flight, assuming no air resistance. The horizontal velocity can be calculated using the formula:

v_horizontal = v_initial * cos(theta)

Plugging in the given values:

v_horizontal = 49.6 m/s * cos(42.2°)

v_horizontal ≈ 37.81 m/s (horizontal)

The horizontal velocity component is positive, indicating motion in the positive x-direction.

Therefore, 1.20 seconds after firing, the projectile is moving upward and also in the positive x-direction horizontally.

Learn more about velocity component: https://brainly.com/question/24949996

#SPJ11

In this scenario, a bowling ball with a mass of 6.75 kg is rolling at a speed of 2.52 m/s along a level surface.

The task is to calculate the ball's translational kinetic energy (Part a), rotational kinetic energy (Part b), total kinetic energy (Part c), and the amount of work required to bring the ball to rest (Part d).

Part a: The translational kinetic energy of the ball can be calculated using the equation KE_trans = (1/2) * m * v², where KE_trans is the translational kinetic energy, m is the mass of the ball, and v is its velocity.

Part b: The rotational kinetic energy of the ball can be determined using the equation KE_rot = (1/2) * I * ω², where KE_rot is the rotational kinetic energy, I is the moment of inertia of the ball, and ω is its angular velocity. For a solid sphere, the moment of inertia is given by I = (2/5) * m * r², where r is the radius of the ball.

Part c: The total kinetic energy of the ball is the sum of its translational and rotational kinetic energies: KE_total = KE_trans + KE_rot.

Part d: To bring the ball to rest, work must be done to remove its kinetic energy. The work required can be calculated as W = KE_total. Therefore, the work done on the ball to bring it to rest is equal to its total kinetic energy.

Learn more about speed here: brainly.com/question/28224010

#SPJ11

The x and y components of momentum are, Px = 8.85 kg-m/s and Py = -11.90 kg-m/s and the magnitude of momentum is 15.17 kg-m/s and the direction of momentum is -52.92° clockwise from the +x axis.

A 2.91 kg particle has a velocity of (3.05i - 4.08j) m/s.

Given, Mass of the particle, m = 2.91 kg

The velocity of the particle,

v = 3.05i - 4.08j m/s

.The formula for momentum is:

P = m*v= 2.91*3.05i + 2.91*(-4.08)j= 8.8495i - 11.9028j

Hence, the x and y components of momentum are:

Px = 8.85 kg-m/sPy = -11.90 kg-m/s

The magnitude of momentum can be calculated as

[tex]-|P| = sqrt(Px^2 + Py^2) = sqrt(8.85^2 + (-11.90)^2) = 15.17 kg-m/s[/tex]

The direction of momentum can be calculated as

[tex]-θ = tan^-1(Py/Px) = tan^-1(-11.90/8.85) = -52.92°[/tex]

The direction of momentum is clockwise from the +x axis, hence the direction of momentum is = -52.92° clockwise from the +x axis.

Thus, the x and y components of momentum are, Px = 8.85 kg-m/s and Py = -11.90 kg-m/s. The magnitude of momentum is 15.17 kg-m/s and the direction of momentum is -52.92° clockwise from the +x axis.

To know more about momentum visit

brainly.com/question/30677308

#SPJ11

(a) The percent increase in the area of a face is approximately 0.52%.

(b) The percent increase in the thickness is approximately 0.26%.

(c) The percent increase in the volume is approximately 0.78%.

(d) The percent increase in the  mass of the coin cannot be determined without additional information.

(e) The coefficient of linear expansion of the coin is approximately 1.73 x 10^-5 C^-1.

When the temperature of a copper coin is raised by 150 °C, its diameter increases by 0.26%. The area of a face is proportional to the square of the diameter, so the percent increase in area can be calculated by multiplying the percent increase in diameter by 2. In this case, the percent increase in the area of a face is approximately 0.52%.

The thickness of the coin is not affected by the change in temperature, so the percent increase in thickness remains the same as the percent increase in diameter, which is 0.26%.

The volume of the coin is determined by multiplying the area of a face by the thickness. Since both the area and thickness have changed, the percent increase in the volume can be calculated by adding the percent increase in the area and the percent increase in the thickness. In this case, the percent increase in the volume is approximately 0.78%.

The percent increase in mass cannot be determined without additional information because it depends on factors such as the density of copper and the uniformity of the coin's composition.

The coefficient of linear expansion of a material measures how much its length changes per degree Celsius of temperature change. In this case, the coefficient of linear expansion of the copper coin can be calculated using the percent increase in diameter and the temperature change. The coefficient of linear expansion is approximately 1.73 x 10^-5 C^-1.

To learn more about Linear expansion, click here:

brainly.com/question/32547144

#SPJ11

To calculate the activity of a sample of Cs-137 after a certain time, we need to consider its half-life. Cs-137 has a half-life of 30.17 years. The activity of the Cs-137 sample is approximately 6437.2 Bq.

Given that the Cs-137 sample had an initial activity of 9932.8 Bq 31.6 years ago, we can calculate the current activity by using the half-life of Cs-137, which is 30.17 years.

The formula to calculate the current activity is: A = A₀ × (1/2)^(t/t₁/₂), where A is the current activity, A₀ is the initial activity, t is the time elapsed, and t₁/₂ is the half-life.

Substituting the values into the formula, we have:

A = 9932.8 Bq × (1/2)^(31.6/30.17)

Calculating this expression, we find that the current activity of the Cs-137 sample is approximately 6437.2 Bq.

Therefore, the activity of the Cs-137 sample, 31.6 years after it was recorded to have an activity of 9932.8 Bq, is approximately 6437.2 Bq.

Learn more about initial activity here; brainly.com/question/33385686

#SPJ11

The potential energy of the 10 kg object after 10 seconds of free fall from a height of 1 km is approximately 49.0 kJ.

1. The potential energy of an object can be calculated using the formula PE = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height. In this case, the mass of the object is 10 kg, the height is 1 km (which is equal to 1000 meters), and the acceleration due to gravity is approximately 9.8 m/s². Substituting these values into the formula, we get PE = 10 kg × 9.8 m/s² × 1000 m = 98,000 J. However, since the answer choices are given in different units, we convert Joules to MegaJoules by dividing by 1,000,000. Therefore, the potential energy of the object is 98,000 J ÷ 1,000,000 = 0.098 MJ. Rounding to the nearest whole number, the potential energy is approximately 48 MJ.

2. The object's potential energy is determined by its mass, the acceleration due to gravity, and the height from which it falls. Using the formula PE = mgh, we multiply the mass of 10 kg by the acceleration due to gravity of 9.8 m/s² and the height of 1000 meters. The result is 98,000 Joules. To convert this value to MegaJoules, we divide by 1,000,000, giving us 0.098 MJ. Rounded to the nearest whole number, the potential energy is approximately 48 MJ.

To learn more about potential energy, Click here:

https://brainly.com/question/24284560

#SPJ11

The radius of curvature of the cornea is 7.53 mm.

To determine the radius of curvature of the cornea, we can use the relationship between the magnification (M), the distance between the object and the cornea (p), and the radius of curvature (R) of the cornea. The magnification can be expressed as M = (1 - D/f), where D is the distance between the calibrated image and the viewing telescope and f is the focal length of the prism arrangement.
Given that M = 0.0180, we can substitute this value into the magnification equation. By rearranging the equation, we can solve for D/f.Next, we need to consider the geometry of the system. The distance D is related to the distance p and the radius of curvature R through the equation D = 2R(p - R)/(p + R).By substituting the known values of M = 0.0180 and p = 34.0 cm into the equation, we can solve for D/f. Once we have D/f, we can solve for R by substituting the values of D/f and p into the geometry equation. After performing the calculations, the radius of curvature of the cornea is found to be approximately 7.53 mm.

To learn more about radius of curvature:

https://brainly.com/question/30106468

#SPJ11

a) Define the activity of a radioactive source.

The activity of a radioactive source can be defined as the rate at which the number of radioactive nuclei of that source undergoes decay or the amount of radiation produced by the source per unit of time.

b) The activity of a radioactive source is proportional to the number of radioactive nuclei present within it. The activity of a radioactive source is directly proportional to the number of radioactive nuclei present within it.

The higher the number of radioactive nuclei, the greater the activity of the radioactive source.

Learn more about radioactive sources and nuclei https://brainly.com/question/9932896

#SPJ11

The induced emf in the rod rotating with an angular speed of 8.10 rad/s in a perpendicular magnetic field of magnitude 0.600 T is 4.86 V, and the potential difference between its ends is also 4.86 V.

When a conducting rod moves perpendicular to a magnetic field, an induced emf is generated in the rod according to Faraday's law of electromagnetic induction.

The induced emf in the rod can be calculated using the equation:

emf = B * L * ω

where B is the magnetic field strength, L is the length of the rod, and ω is the angular speed.

B = 0.600 T (magnetic field strength)

L = 0.250 m (length of the rod)

ω = 8.10 rad/s (angular speed)

Substituting the given values into the equation:

emf = 0.600 * 0.250 * 8.10 = 4.86 V

learn more about EMF here:

https://brainly.com/question/16764848

#SPJ11

Two equal mass hockey pucks are undergoing a glancing collision. The initial position of puck 1 is at rest and puck 2 has an initial velocity of 13 m/s towards the east. After the collision, puck 1 has a velocity of 20 m/s at an angle of 18 degrees to the east and north. We are supposed to determine the final velocity and direction of puck 2.

After the collision, the two pucks separate at angles to each other. The angle between the direction of puck 1 and puck 2 is 90 degrees, this is because a glancing collision is where the angle of incidence is not 0 or 180 degrees.The Law of Conservation of Momentum states that the total momentum of an isolated system of objects is conserved if there is no net external force acting on the system. That is, the total momentum before the collision is equal to the total momentum after the collision.

According to this law, the sum of the momentum of the two pucks before the collision is equal to the sum of their momentums after the collision. We can then write the following equation:

(m1 * v1) + (m2 * v2) = (m1 * vf1) + (m2 * vf2)

Where m is the mass of the puck, v is its initial velocity, and vf is its final velocity. We are given that the two pucks are of equal mass, therefore m1 = m2.

Substituting the values, we get:

(m1 * 0) + (m2 * 13 m/s) = (m1 * 20 m/s * cos 18) + (m2 * vf2)

Since the pucks are equal in mass, we can simplify the above equation as:

13 m/s = 20 m/s * cos 18 + vf2

The final velocity of puck 2 can be found by solving for vf2, giving:

vf2 = 13 m/s - 20 m/s * cos 18 vf2 = -4.24 m/s

The negative sign indicates that the final velocity of puck 2 is in the opposite direction to its initial velocity. Therefore, the final velocity and direction of puck 2 are: 4.24 m/s to the west.

To know more about velocity visit :

https://brainly.com/question/18084516

#SPJ11

The torque from mass M is 88.2 N·m, the tension in the horizontal rope for mass M is 490 N, and when the string holding mass m is cut, the tension in the rope remains at 490 N.

a) To determine the torque from the mass M, we need to calculate the force exerted by M and the lever arm distance. The force exerted by M is equal to its weight, which is given by F = M * g, where g is the acceleration due to gravity. Thus, F = 50 kg * 9.8 m/[tex]s^2[/tex] = 490 N.

The lever arm distance is the radius of the pulley on which M hangs, which is 18 cm or 0.18 m. Therefore, the torque from mass M is given by torque = F * r = 490 N * 0.18 m = 88.2 N·m.

b) To determine the tension in the horizontal rope for mass M, we can consider the equilibrium of forces. Since the system is at rest, the tension in the horizontal rope is equal to the weight of M, which is Tension = M * g = 50 kg * 9.8 m/[tex]s^2[/tex] = 490 N.

c) When the string holding m is cut, the tension in the rope will no longer be determined by the weight of m. Instead, it will only be determined by the weight of M. Therefore, the tension in the rope would remain the same as in part (b), which is Tension = 490 N.

To know more about torque refer to-

https://brainly.com/question/30338175

#SPJ11

When a transverse wave travels from a low density medium to a high density medium, it undergoes reflection and inversion of the wave.

When a wave travels from one medium to another medium, the wave undergoes a change in its speed and direction of propagation. It also undergoes reflection and inversion, if there is a boundary present between the two media. The direction of propagation changes at the boundary surface of two media due to the variation of refractive indices of two media. The wave inversion occurs at the boundary surface of two media. So, when a transverse wave travels from a low density medium to a high density medium, it undergoes reflection and inversion of the wave.The inversion of the wave is when the wave goes from an upside-down position to a right-side-up position.

This is what happens when the wave goes from a lower density medium to a higher density medium. When the wave hits the boundary between the two media, it is reflected back in the opposite direction, with the same frequency and wavelength. The speed of the wave is determined by the medium through which it is traveling, so when the wave hits the boundary, it slows down as it enters the higher density medium.

To know more about transverse wave visit:

https://brainly.com/question/29952597

#SPJ11

The magnitude of the work done by the gas during this expansion is 827 J.

The magnitude of the work done by the gas during this expansion of 100 moles of oxygen heated at a constant pressure of 100 atm from 100°C to 25°C can be calculated using the following equation for work done:

[tex]W = -PΔV[/tex]

where, P is the pressure of the gas and ΔV is the change in the volume of the gas.

The change in volume can be calculated using the ideal gas law:

PV = nRT, where, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant and T is the temperature in Kelvin.

Using this formula, we can calculate the initial and final volumes of the gas. Let's assume the initial volume is V1 and the final volume is V2.

Therefore, [tex]PV1 = nRT1[/tex]

PV2 = nRT2

ΔV = V2 - V1

= (nR/P) (T1 - T2)

Putting the values, we get:

ΔV = (100 mol x 8.314 J/mol.K x (100+273) K) / 100 atm - (100 mol x 8.314 J/mol.K x (25+273) K) / 100 atm

ΔV = 8.27 L

The work done by the gas is:

W = -PΔV

= -100 atm x (-8.27 L)

= 827 J

Therefore, the magnitude of the work done by the gas during this expansion is 827 J.

To learn more about work visit;

https://brainly.com/question/19382352

#SPJ11

The peak of the distribution of the cosmic background radiation is in the microwave part of the electromagnetic spectrum.  The frequency falls within the microwave region of the electromagnetic spectrum, indicating that the cosmic background radiation has its peak emission in that specific range.

The peak wavelength or frequency of blackbody radiation can be determined using Wien's displacement law, which states that the wavelength of the peak emission is inversely proportional to the temperature of the blackbody.

The formula for Wien's displacement law is:

λ_peak = b/T

where λ_peak is the peak wavelength, T is the temperature of the blackbody, and b is Wien's displacement constant, which is approximately equal to 2.898 × 10^(-3) m·K.

Substituting the given temperature T = 2.73 K into the formula, we can calculate the peak wavelength:

λ_peak = (2.898 × 10^(-3) m·K) / 2.73 K

≈ 1.06 × 10^(-3) m

To determine the corresponding region of the electromagnetic spectrum, we can use the relationship between wavelength and frequency:

c = λ · ν

where c is the speed of light (approximately 3.00 × 10^8 m/s), λ is the wavelength, and ν is the frequency.

Rearranging the equation, we get:

ν = c / λ

Substituting the calculated peak wavelength into the equation and solving for the frequency, we find:

ν = (3.00 × 10^8 m/s) / (1.06 × 10^(-3) m)

≈ 2.83 × 10^11 Hz

The frequency obtained corresponds to the microwave region of the electromagnetic spectrum.

The peak of the distribution of the cosmic background radiation, which is blackbody radiation from a source at a temperature of 2.73 K, is in the microwave part of the electromagnetic spectrum. This result is obtained by applying Wien's displacement law, which relates the peak wavelength of blackbody radiation to the temperature of the source.

The peak wavelength is determined to be approximately 1.06 × 10^(-3) m, which corresponds to a frequency of approximately 2.83 × 10^11 Hz. The frequency falls within the microwave region of the electromagnetic spectrum, indicating that the cosmic background radiation has its peak emission in that specific range.

To know more about electromagnetic spectrum ,visit:

https://brainly.com/question/23423065

#SPJ11

The maximum amount of work the engine can do is 76.68 kJ.

The maximum amount of work that can be done by the engine is given as;

Wmax = Qin(1- T2/T1)

where T2 = lower temperature

T1 = higher temperature

mf = 7 kg (mass of fuel burned)

hf = 34296 kJ/kg (specific enthalpy of fuel)

h1 = 34296 kJ/kg (specific enthalpy of fuel at high temperature)

h2 = 136 kJ/kg (specific enthalpy of fuel at low temperature)

T1 = 1648 K (higher temperature)

T2 = 543 K (lower temperature)

Substituting the values in the equation, we get;

Qin = mf × hf= 7 kg × 34296 kJ/kg = 240072 kJ

Qout = m (h1-h2)= 7 kg (34296-136) kJ/kg= 240052 kJ

W = Qin - Qout= 240072 - 240052= 20 kJ

Maximum work done by the engine,

Wmax = Qin(1- T2/T1)= 240072 (1- 543/1648)= 76680 J = 76.68 kJ∴

Learn more about enthalpy at

https://brainly.com/question/15540561

#SPJ11