Given cos θ=-15/17 and 180°<θ<270° , find the exact value of each expression. tan θ/2

The dimensions of the rectangular plot of land can be either 11 meters by 13 meters or 13 meters by 11 meters.

Let's assume the length of the rectangular plot of land is L and the width is W.

We are given that the perimeter of the fence is 48 meters, which means the sum of all four sides of the rectangular plot is 48 meters.

Therefore, we can write the equation:

2L + 2W = 48

We are also given that the area of the land is 143 square meters, which can be expressed as:

L * W = 143

Now, we have a system of two equations with two variables. We can use substitution or elimination to solve for the dimensions of the field.

Let's use the elimination method to eliminate one variable:

From equation 1, we can rewrite it as L = 24 - W.

Substituting this value of L into equation 2, we get:

(24 - W) * W = 143

Expanding the equation, we have:

24W - W^2 = 143

Rearranging the equation, we get:

W^2 - 24W + 143 = 0

Factoring the quadratic equation, we find:

(W - 11)(W - 13) = 0

Setting each factor to zero, we have two possibilities:

W - 11 = 0 or W - 13 = 0

Solving these equations, we get:

W = 11 or W = 13

If W = 11, then from equation 1, we have L = 24 - 11 = 13.

If W = 13, then from equation 1, we have L = 24 - 13 = 11.

For more such questions on dimensions visit:

https://brainly.com/question/28107004

#SPJ8

Answer: 28x+8y+2 .

= -2 (-14x-4y-1)

= 28x + 8y + 2

Step-by-step explanation:

Answer: 28x + 8y + 2

Step-by-step explanation:

-2(3x+12y-5-17x-16y+4)

= -2(3x-17x+12y-16y-5+4)

= -2(-14x-4y-1)

= -2(-14x) -2(-4y) -2(-1)

= 28x+8y+2

The least common multiple (LCM) of the polynomials x² - 32x - 10 and 2x + 10 is 2(x + 2)(x - 10)(x + 5).

To calculate the LCM, we need to find the polynomial that contains all the factors of both polynomials, while excluding any redundant factors.

Let's first factorize each polynomial to identify their prime factors:

x² - 32x - 10 = (x + 2)(x - 10)

2x + 10 = 2(x + 5)

Now, we can construct the LCM by including each prime factor once and raising them to the highest power found in either polynomial:

LCM = (x + 2)(x - 10)(2)(x + 5)

Simplifying the expression, we obtain:

LCM = 2(x + 2)(x - 10)(x + 5)

Therefore, the LCM of x² - 32x - 10 and 2x + 10 is 2(x + 2)(x - 10)(x + 5).

To know more about LCM (Least Common Multiple), refer here:

https://brainly.com/question/24510622#

#SPJ11

if you're solving it for R, it's r = 3s

if you're solving for S, it's s = r/3

The postulate or property of putting points on a line or line segment into one-to-one correspondence with real numbers does not have a corresponding statement in spherical geometry, In Euclidean geometry

In Euclidean geometry, the real number line provides a convenient way to assign a unique value to each point on a line or line segment. This correspondence allows us to establish a consistent and continuous measurement system for distances and positions. However, in spherical geometry, which deals with the properties of objects on the surface of a sphere, the concept of a straight line is different. On a sphere, lines are great circles, and the shortest path between two points is along a portion of a great circle.

In spherical geometry, there is no direct correspondence between points on a great circle and real numbers. Instead, spherical coordinates, such as latitude and longitude, are used to specify the positions of points on a sphere. These coordinates involve angles measured with respect to reference points, rather than linear measurements along a number line.

The absence of a one-to-one correspondence between points on a line or line segment and real numbers in spherical geometry is due to the curvature and non-planarity of the surface. The geometric properties and relationships in spherical geometry are distinct and require alternative mathematical frameworks for their description.

Learn more about  Euclidean geometry

brainly.com/question/31120908

#SPJ11

We have U0,j = U(m,j) = 0, Ui,0 = sin πxi, i = 0, 1, 2, …, m. We have h₂ = 1/9 and ∆t = k/h₂ = 1/4. Using the above formulae and values, we can obtain the numerical solution of the given equation for two levels.

Given, Ut -Uxx = 0, 0
u (0,t) = u (1, t) = 0, t ≥ 0
u(x,0) = sin πx, 0 ≤ x ≤ 1

To compute the solution for Ut -Uxx = 0, with the boundary conditions u (0.t) = u (1, t) = 0, t ≥ 0, and the initial conditions u(x,0) = sin πx, 0 ≤ x ≤ 1, we first discretize the given equation by forward finite difference for time and central finite difference for space, which is given by: Uni, j+1−Ui, j∆t=U(i−1)j−2Ui, j+U(i+1)jh₂ where i = 1, 2, …, m – 1, j = 0, 1, …, n.
Here, we have used the following notation: Ui,j denotes the numerical approximation of u(xi, tj), and ∆t and h are time and space steps, respectively. Also, we need to discretize the boundary condition, which is given by u (0.t) = u (1, t) = 0, t ≥ 0. Therefore, we have U0,j=Um,j=0 for all j = 0, 1, …, n.
Now, to obtain the solution, we need to compute the values of Ui, and j for all i and j. For that, we use the given initial condition, which is u(x,0) = sin πx, 0 ≤ x ≤ 1. Therefore, we have U0,j = U(m,j) = 0, Ui,0 = sin πxi, i = 0, 1, 2, …, m. Using the above expressions, we can compute the values of Ui, and j for all i and j. However, since the solution is given for two levels, we take h = 1/3 and k = 1/36. Therefore, we have h₂ = 1/9 and ∆t = k/h₂ = 1/4. Using the above formulae and values, we can obtain the numerical solution of the given equation for two levels.

Learn more about numerical approximation here:

https://brainly.com/question/33117679

#SPJ11

Answer:

x < 8/5

Step-by-step explanation:

5x + 2 < 10

Subtract 2 from both sides

5x < 8

Divided by 5, both sides

x < 8/5

So, the answer is x < 8/5

The given statement can be simplified using logical rules and operations to obtain a final conclusion.

In the given statement, a series of logical rules and operations are applied step by step to simplify the expression and derive a final conclusion. The specific rules used include De-Morgan's Law, Simplification, Modus Tollen, Disjunctive Syllogism, and Conjunction.

De-Morgan's Law allows us to negate the conjunction or disjunction of two propositions. Simplification involves reducing a compound statement to one of its simpler components. Modus Tollen is a valid inference rule that allows us to conclude the negation of the antecedent when the negation of the consequent is given. Disjunctive Syllogism allows us to infer a disjunctive proposition from the negation of the other disjunct. Conjunction combines two propositions into a compound statement.

By applying these rules and operations, we simplify the given statement step by step until we reach the final conclusion. Each step involves analyzing the structure of the statement and applying the appropriate rule or operation to simplify it further. This process allows us to clarify the relationships between different propositions and draw logical conclusions.

Learn more about De-Morgan's Law

brainly.com/question/29073742

#SPJ11

If the two vectors in Cn, the Euclidean inner product of u=(−i,2i,1−i), v=(3i,0,1+2i) is 3 + 3i.

We have two vectors in Cn as follows: u = (−i, 2i, 1 − i) and v = (3i, 0, 1 + 2i). The Euclidean inner product of two vectors is calculated by the sum of the product of corresponding components. It is represented by "." Therefore, the Euclidean inner product of vectors u and v is:

u·v = -i(3i) + 2i(0) + (1-i)(1+2i)

u·v = -3i² + (1 - i + 2i - 2i²)

u·v = -3(-1) + (1 - i + 2i + 2)

u·v = 3 + 3i

So the Euclidean inner product of the given vectors is 3 + 3i.

you can learn more about vectors at: brainly.com/question/13322477

#SPJ11

The expression L^(-1){(s^2 + 2s) e^(-4s^3)} is equal to (t - 4)e^(2(t - 4)^2).

Step 1:

Using the result L{u(t - a)f(t - a)} = e^(-as)L{f(t)}, we can find the inverse Laplace transform of the given expression.

Step 2:

Given L^(-1){(s^2 + 2s) e^(-4s^3)}, we can rewrite it as L^(-1){s(s + 2) e^(-4s^3)}. Now, applying the result L^(-1){s^n F(s)} = (-1)^n d^n/dt^n {F(t)} for F(s) = e^(-4s^3), we get L^(-1){s(s + 2) e^(-4s^3)} = (-1)^2 d^2/dt^2 {e^(-4t^3)}.

To find the second derivative of e^(-4t^3), we differentiate it twice with respect to t. The derivative of e^(-4t^3) with respect to t is -12t^2e^(-4t^3), and differentiating again, we get the second derivative as -12(1 - 12t^6)e^(-4t^3).

Step 3:

Therefore, the expression L^(-1){(s^2 + 2s) e^(-4s^3)} simplifies to (-1)^2 d^2/dt^2 {e^(-4t^3)} = d^2/dt^2 {(t - 4)e^(2(t - 4)^2)}. This means the inverse Laplace transform of (s^2 + 2s) e^(-4s^3) is (t - 4)e^(2(t - 4)^2).

Learn more about inverse Laplace transform.
brainly.com/question/30404106

#SPJ11

The main answer is as follows:

The correct representation of 1024 in base four is [tex]\(1024_{10} = 100000_4\).[/tex]

To convert 1024 from base ten to base four, we need to find the largest power of four that is less than or equal to 1024.

In this case,[tex]\(4^5 = 1024\)[/tex] , so we can start by placing a 1 in the fifth position (from right to left) and the remaining positions are filled with zeroes. Therefore, the representation of 1024 in base four is [tex]\(100000_4\).[/tex]

In base four, each digit represents a power of four. Starting from the rightmost digit, the powers of four increase from right to left.

The first digit represents the value of four raised to the power of zero (which is 1), the second digit represents four raised to the power of one (which is 4), the third digit represents four raised to the power of two (which is 16), and so on. In this case, since we only have a single non-zero digit in the fifth position, it represents four raised to the power of five, which is equal to 1024.

Therefore, the correct representation of 1024 in base four is [tex]\(1024_{10} = 100000_4\).[/tex]

Learn more about base ten to base four:

brainly.com/question/32689697

#SPJ11

The probability of both events A and B happening is 20%, calculated by adding the individual probabilities of A and B and subtracting the probability of either event happening.

To find the probability that both events A and B happen, we can use the formula:
P(A and B) = P(A) + P(B) - P(A or B)

The probability of event A is 25%, the probability of event B is 35%, and the probability that neither event happens is 40%, we can substitute these values into the formula.

P(A and B) = 0.25 + 0.35 - 0.40

Simplifying the equation, we get:
P(A and B) = 0.20

Therefore, the probability that both events A and B happen is 20%.

To know more about probability, refer to the link below:

https://brainly.com/question/18916470#

#SPJ11

Eliminate the constraints g1 and g2 from the optimization problem, effectively reducing it to a problem with k - 2 variables.

The Implicit Function Theorem provides a powerful tool for solving optimization problems with constraints.  In general, if we have an objective function with k ≥ 3 variables and two constraints, we can apply the Implicit Function Theorem to transform the constrained optimization problem into an unconstrained one. Consider an example with k ≥ 4 variables.

Let's say we have an objective function f(x1, x2, x3, x4) and two constraints g1(x1, x2, x3, x4) = 0 and g2(x1, x2, x3, x4) = 0.

We can define a new function:

F(x1, x2, x3, x4, y1, y2) = (f(x1, x2, x3, x4), g1(x1, x2, x3, x4), g2(x1, x2, x3, x4)) and apply the Implicit Function Theorem.

If det(dyF) ≠ 0, then we can solve the system F(x, y) = 0 to obtain a function y = g(x1, x2, x3, x4).

This allows us to eliminate the constraints g1 and g2 from the optimization problem, effectively reducing it to a problem with k - 2 variables.

The optimization problem can then be solved using standard unconstrained optimization techniques applied to the reduced objective function f(x1, x2, x3, x4) with variables x1, x2, x3, and x4.

The solutions obtained will satisfy the original constraints g1(x1, x2, x3, x4) = 0 and g2(x1, x2, x3, x4) = 0.

By using the Implicit Function Theorem, we are able to transform the optimization problem with constraints into an unconstrained problem with a reduced number of variables, simplifying the solution process.For example, the equation x 2 – y 2 = 1 is an implicit equation while the equation y = 4 x + 6 represents an explicit function.

To learn more about variables click here: brainly.com/question/13226641

#SPJ11

The line integral ∮C' F · dr is equal to y√3.

To evaluate the line integral ∮C' F · dr using Stokes' Theorem, we need to compute the curl of F and find the surface integral of the curl over the surface C bounded by the triangle C'.

First, let's calculate the curl of F:

curl F = ( ∂Fz/∂y - ∂Fy/∂z )i + ( ∂Fx/∂z - ∂Fz/∂x )j + ( ∂Fy/∂x - ∂Fx/∂y )k

Given F = 2x² + y² + xk, we can find the partial derivatives:

∂Fz/∂y = 0

∂Fy/∂z = 0

∂Fx/∂z = 0

∂Fz/∂x = 0

∂Fy/∂x = 0

∂Fx/∂y = 2y

Therefore, the curl of F is curl F = 2yi.

Next, we need to find the surface integral of the curl over the surface C, which is the triangle C'.

Since the triangle C' is a flat surface, its surface area is simply the area of the triangle. The vertices of the triangle C' are (1,0,0), (0,1,0), and (0,0,1).

We can use the cross product to find the normal vector to the surface C:

n = (p2 - p1) × (p3 - p1)

where p1, p2, and p3 are the vertices of the triangle.

p2 - p1 = (0,1,0) - (1,0,0) = (-1,1,0)

p3 - p1 = (0,0,1) - (1,0,0) = (-1,0,1)

Taking the cross product:

n = (-1,1,0) × (-1,0,1) = (-1,-1,-1)

The magnitude of the normal vector is |n| = √(1² + 1² + 1²) = √3.

Now, we can evaluate the surface integral using the formula:

∬S (curl F) · dS = ∬S (2yi) · dS

Since the triangle C' lies in the xy-plane, the z-component of the normal vector is zero, and the dot product simplifies to:

∬S (2yi) · dS = ∬S (2y) · dS

The integral of 2y with respect to dS over the surface C' is simply the integral of 2y over the area of the triangle C'.

To find the area of the triangle C', we can use the formula for the area of a triangle:

Area = (1/2) |n|

Therefore, the area of the triangle C' is (1/2) √3.

Finally, we can evaluate the surface integral:

∬S (2y) · dS = (2y) Area

= (2y) (1/2) √3

= y√3

So, the line integral ∮C' F · dr is equal to y√3.

Learn more about Stokes' Theorem

brainly.com/question/10773892

#SPJ11

The attack rate for the people who ate the shrimp salad and fell ill is approximately 10.50%.

To calculate the attack rate for the people who ate the shrimp salad and fell ill, we need to divide the number of people who ate the shrimp salad and fell ill by the total number of people who ate the shrimp salad, and then multiply by 100 to express it as a percentage.

Given information:

Total number of passengers = 1,780

Total number of crew members = 240

Total number of people who ate the shrimp salad and fell ill = 212

Total number of people who ate the shrimp salad = Total number of passengers + Total number of crew members = 1,780 + 240 = 2,020

Attack Rate = (Number of people who ate shrimp salad and fell ill / Number of people who ate shrimp salad) * 100

Attack Rate = (212 / 2,020) * 100

Attack Rate ≈ 10.50

Learn more about percentage

https://brainly.com/question/32197511

#SPJ11

Answer:

The fraction turns out to be 9/20

Step-by-step explanation:

Since 45% of the shoes were athletic shoes,

To determine this in fractions, we write 45% as,

45% = 45/100

and then simplify,

Since both can be divided by 5, we have after simplifying,

the fraction is 9/20

a) The quadratic function represents the distance traveled by an object is  f(t) = at^(2)+ bt + c, where t represents time and a, b, and c are constants.

b) The zeros of the function f(t) = 2t^(2) + 3t + 1 are t = -0.5 and t = -1.

To find the zeros of a quadratic function, we need to set the function equal to zero and solve for the variable. In this case, the quadratic function represents the distance traveled by an object that is increasing its speed at a constant rate.

Let's say the quadratic function is represented by the equation f(t) = at^(2)+ bt + c, where t represents time and a, b, and c are constants.

To find the zeros, we set f(t) equal to zero:

at^(2)+ bt + c = 0

We can then use the quadratic formula to solve for t:

t = (-b ± √(b^(2)- 4ac)) / (2a)

The solutions for t are the zeros of the function, representing the times at which the distance traveled is zero.

For example, if we have the quadratic function f(t) = 2t^(2)+ 3t + 1, we can plug the values of a, b, and c into the quadratic formula to find the zeros.

In this case, a = 2, b = 3, and c = 1:

t = (-3 ± √(3^(2)- 4(2)(1))) / (2(2))

Simplifying further, we get:

t = (-3 ± √(9 - 8)) / 4
t = (-3 ± √1) / 4
t = (-3 ± 1) / 4

This gives us two possible values for t:

t = (-3 + 1) / 4 = -2 / 4 = -0.5

t = (-3 - 1) / 4 = -4 / 4 = -1


In summary, to find the zeros of a quadratic function, we set the function equal to zero, use the quadratic formula to solve for the variable, and obtain the values of t that make the function equal to zero.

Learn more about quadratic function from the given link

https://brainly.com/question/31300983

#SPJ11  

The calculated value of x in the figure is 35

From the question, we have the following parameters that can be used in our computation:

The figure

From the figure, we have

Angle x and angle CAB have the same mark

This means that the angles are congruent

So, we have

x = CAB

Given that

CAB = 35

So, we have

x = 35

Hence, the value of x is 35

Read more about angles at

https://brainly.com/question/31898235

#SPJ1

(a) (~P) V Q and P⇒ Q are equivalent.

(b) P⇒ (Q V R) and ([tex]Q ^ R[/tex]) ⇒ P are not equivalent.

(c) P Q and (~P) ⇒ (~Q) are not equivalent.

To determine whether the given statements are equivalent, we can construct truth tables for each statement and compare the resulting truth values.

(a) (~P) V Q and P ⇒ Q:

P Q ~P (~P) V Q P ⇒ Q

T T F T T

T F F F F

F T T T T

F F T T T

The truth values for (~P) V Q and P ⇒ Q are the same for all possible combinations of truth values for P and Q. Therefore, statement (a) is true.

(b) P ⇒ (Q V R) and ([tex]Q ^ R[/tex]) ⇒ P:

P Q R Q V R P ⇒ (Q V R) ([tex]Q ^ R[/tex]) ⇒ P

T T T T T T

T T F T T T

T F T T T T

T F F F F T

F T T T T F

F T F T T F

F F T T T F

F F F F T T

The truth values for P ⇒ (Q V R) and ([tex]Q ^ R[/tex]) ⇒ P are not the same for all possible combinations of truth values for P, Q, and R. Therefore, statement (b) is false.

(c) P Q and (~P) ⇒ (~Q):

P Q ~P ~Q P Q (~P) ⇒ (~Q)

T T F F T T

T F F T F T

F T T F F F

F F T T F T

The truth values for P Q and (~P) ⇒ (~Q) are not the same for all possible combinations of truth values for P and Q. Therefore, statement (c) is false.

In conclusion:

(a) (~P) V Q and P⇒ Q are equivalent.

(b) P⇒ (Q V R) and ([tex]Q ^ R[/tex]) ⇒ P are not equivalent.

(c) P Q and (~P) ⇒ (~Q) are not equivalent.

To know more about equivalent:

https://brainly.com/question/25197597

#SPJ4

Answer:

Each piece of soap weighs about 0.16 pounds.

Step-by-step explanation:

We Know

Linda made a block of scented soap, which weighed 1/2 of a pound.

1/2 = 0.5

She divided the soap into 3 equal pieces.

How much did each piece of soap weigh?

We Take

0.5 ÷ 3 ≈ 0.16 pound

So, each piece of soap weighs about 0.16 pounds.

Positive, non-linear correlation curves upward as you travel from left to

right across a scatterplot. The correct Option is C. Positive, non-linear

As you travel from left to right across a scatterplot, if the correlation curve curves upward, it indicates a positive relationship between the variables but with a non-linear pattern.

This means that as the value of one variable increases, the other variable tends to increase as well, but not at a constant rate. The relationship between the variables is not a straight line, but rather exhibits a curved pattern.

For example, if we have a scatterplot of temperature and ice cream sales, as the temperature increases, the sales of ice cream also increase, but not in a linear fashion.

Initially, the increase in temperature may result in a moderate increase in ice cream sales, but as the temperature continues to rise, the increase in ice cream sales becomes more significant, leading to a curve that is upward but not straight.

Learn more about: correlation curve curves

https://brainly.com/question/30642196

#SPJ11

Answer:

Step-by-step explanation:

given ODE is needed to determine the intervals where solutions are certain to exist. Without the ODE itself, it is not possible to provide precise intervals for solution existence.

To establish intervals where solutions are certain to exist, we consider two main factors: the behavior of the ODE and any initial conditions provided.

1. Behavior of the ODE: We examine the coefficients and terms in the ODE to identify any potential issues such as singularities or undefined solutions. If the ODE is well-behaved and continuous within a specific interval, then solutions are certain to exist within that interval.

2. Initial conditions: If initial conditions are provided, such as values for y and its derivatives at a particular point, we look for intervals around that point where solutions are guaranteed to exist. The existence and uniqueness theorem for first-order ODEs ensures the existence of a unique solution within a small interval around the initial condition.

Therefore, based on the given information, we cannot determine the intervals in which solutions are certain to exist without the actual ODE.

Learn more about ODE: brainly.com/question/30126561

#SPJ11

Therefore, based on the given information, we cannot definitively determine the quadrant in which 2β terminates without knowing the specific value of β or further information.

Given that sec β = 75 cos(23°) and sin β > 0, we can determine the quadrant in which 2β terminates. The solution requires finding the value of β and then analyzing the value of 2β.

To determine the quadrant in which 2β terminates, we first need to find the value of β. Given that sec β = 75 cos(23°), we can rearrange the equation to solve for cos β: cos β = 1/(75 cos(23°)).

Using the trigonometric identity sin² β + cos² β = 1, we can find sin β by substituting the value of cos β into the equation: sin β = √(1 - cos² β).

Since it is given that sin β > 0, we know that β lies in either the first or second quadrant. However, to determine the quadrant in which 2β terminates, we need to consider the value of 2β.

If β is in the first quadrant, then 2β will also be in the first quadrant. Similarly, if β is in the second quadrant, then 2β will be in the third quadrant.

Learn more about quadrants from the given link:
https://brainly.com/question/29298581

#SPJ11

a. The first five terms of 2n² + 6 are 8, 14, 24, 38, 56.

b. The first five terms of 5n + 2 are 7, 12, 17, 22, 27.

c. The first five terms of 10h - 1 are 9, 19, 29, 39, 49.

d. The first five terms of 2n - 1 are 1, 3, 5, 7, 9.

a. For the sequence 2n² + 6, we substitute the values of n from 1 to 5 to find the corresponding terms. Plugging in n = 1 gives us 2(1)² + 6 = 8, for n = 2, we have 2(2)² + 6 = 14, and so on, until n = 5, where we get 2(5)² + 6 = 56.

b. In the sequence 5n + 2, we substitute n = 1, 2, 3, 4, and 5 to find the terms. For n = 1, we get 5(1) + 2 = 7, for n = 2, we have 5(2) + 2 = 12, and so on, until n = 5, where we get 5(5) + 2 = 27.

c. For the sequence 10h - 1, we substitute h = 1, 2, 3, 4, and 5 to find the terms. Plugging in h = 1 gives us 10(1) - 1 = 9, for h = 2, we have 10(2) - 1 = 19, and so on, until h = 5, where we get 10(5) - 1 = 49.

d. In the sequence 2n - 1, we substitute n = 1, 2, 3, 4, and 5 to find the terms. For n = 1, we get 2(1) - 1 = 1, for n = 2, we have 2(2) - 1 = 3, and so on, until n = 5, where we get 2(5) - 1 = 9.

Learn more about: Terms

brainly.com/question/28730971

#SPJ11

Hence C(A+3B) is a 2x2 matrix, which is the answer for the given question. Therefore, the correct option is ○a 2×2 matrix.

Let A,B be 2×5 matrices, and C a 5×2 matrix. Then C(A+3B) is a 2×2 matrix. Given that A,B be 2×5 matrices, and C a 5×2 matrix. Then C(A+3B) is calculated as follows: C(A+3B) = CA + 3CBFor matrix multiplication to be defined, the number of columns of the first matrix should be equal to the number of rows of the second matrix.
So the product of CA will be a 2x2 matrix, and the product of 3CB will also be a 2x2 matrix. Hence C(A+3B) is a 2x2 matrix is the  answer for the given question. Therefore, the correct option is ○a 2×2 matrix.

To know more about matrix visit:

https://brainly.com/question/29132693

#SPJ11

The order of C(A+3B) is  2x2 . Thus the resultant matrix will have 2 rows and 2 columns .

Given,

A,B be 2×5 matrices, and C a 5×2 matrix.

Here,

C(A+3B) is calculated as follows:

C(A+3B) = CA + 3CB

For matrix multiplication to be defined, the number of columns of the first matrix should be equal to the number of rows of the second matrix.

So the product of CA will be a 2x2 matrix, and the product of 3CB will also be a 2x2 matrix. Hence C(A+3B) is a 2x2 matrix is the  answer for the given question.

Therefore, the correct option is A :  2×2 matrix.

To know more about matrix visit:

brainly.com/question/29132693

#SPJ4

To prove that the given relation is an equivalence relation, we need to show that it satisfies three conditions: reflexivity, symmetry, and transitivity.

Reflexivity: For any real number x, we have x^2 = x^2, which means x is related to itself. Thus, the relation is reflexive.

Symmetry: If x^2 = y^2, then it implies that (-x)^2 = (-y)^2. Therefore, if x is related to y, then y is also related to x. Hence, the relation is symmetric.

Transitivity: Let's assume that x is related to y (x^2 = y^2) and y is related to z (y^2 = z^2). This implies that x^2 = z^2. Thus, x is related to z. Hence, the relation is transitive.

Therefore, since the relation satisfies all three conditions, it is an equivalence relation.

The equivalence class of a number represents all the numbers that are related to it under the given relation. For the number 2, we have 2^2 = 4, and (-2)^2 = 4. Hence, the equivalence class of 2 is {-2, 2}. Similarly, for the number -5, we have (-5)^2 = 25, and 5^2 = 25. So, the equivalence class of -5 is {-5, 5}. For the number -10, we have (-10)^2 = 100, and 10^2 = 100. Hence, the equivalence class of -10 is {-10, 10}.

Learn more about Real numbers

brainly.com/question/31715634

#SPJ11

The given relation, defined as x²= y², is an equivalence relation. The equivalence class of 2 is {-2, 2}, the equivalence class of (-5) is {5, -5}, and the equivalence class of (-10) is {10, -10}. The equivalence class of any real number n is {-n, n}.

To prove that the given relation is an equivalence relation, we need to show that it satisfies three properties: reflexivity, symmetry, and transitivity.

Reflexivity: For any real number x, x² = x², which means that x is related to itself. Therefore, the relation is reflexive.

Symmetry: If x is related to y (x² = y²), then y is also related to x (y² = x²). This shows that the relation is symmetric.

Transitivity: If x is related to y (x² = y²) and y is related to z (y² = z²), then x is related to z (x² = z²). Thus, the relation is transitive.

Since the relation satisfies all three properties, it is an equivalence relation.

Now, let's determine the equivalence class for each of the given numbers. For 2, we find that 2² = 4 and (-2)² = 4. Hence, the equivalence class of 2 is {-2, 2}. Similarly, for (-5), we have (-5)² = 25 and 5² = 25, so the equivalence class of (-5) is {5, -5}. For (-10), we get (-10)² = 100 and 10² = 100, leading to the equivalence class of (-10) as {10, -10}.

The equivalence class of any real number n can be determined by considering that n² = (-n)². Thus, the equivalence class of n is {-n, n}.

Learn more about Equivalence relation.

brainly.com/question/14307463

#SPJ11

The value of the integral (x² + y²)dA over the triangle T is 1/3.

To evaluate the expression (x² + y²)dA over the triangle T, we need to set up a double integral over the region T.

The triangle T can be defined by the following bounds:

0 ≤ x ≤ 1

0 ≤ y ≤ x

Thus, the integral becomes:

∫∫T (x² + y²) dA = ∫₀¹ ∫₀ˣ (x² + y²) dy dx

We will integrate first with respect to y and then with respect to x.

∫₀ˣ (x² + y²) dy = x²y + (y³/3) |₀ˣ

= x²(x) + (x³/3) - 0

= x³ + (x³/3)

= (4x³/3)

Now, we integrate this expression with respect to x over the bounds 0 ≤ x ≤ 1:

∫₀¹ (4x³/3) dx = (x⁴/3) |₀¹

= (1/3) - (0/3)

= 1/3

Therefore, the value of the integral (x² + y²)dA over the triangle T is 1/3.

Visit to know more about Integral:-

brainly.com/question/30094386

#SPJ11

The equation the engineer can use to determine the radius of the conical container is r = √((3v) / (π * h)).

The area that a conical cylinder occupies is its volume. An inverted frustum, a three-dimensional shape, is a conical cylinder. It is created when an inverted cone's vertex is severed by a plane parallel to the shape's base.

To determine the equation for the radius of the conical container in terms of its volume (V) and height (h), we can rearrange the given formula:

V = (1/3) * π * r^2 * h

Let's solve this equation for r:

V = 1/3 * π * r^2 * h

Multiplying both sides of the equation by 3, we get:

3V = π * r^2 * h

Dividing both sides of the equation by π * h, we get:

r^2 = (3v) / (π * h)

Finally, taking the square root of both sides of the equation, we can determine the equation for the radius (r) of the conical container:

r = √((3v) / (π * h))

Therefore, the radius of the conical container can be calculated using the equation r = √((3v) / (π * h)).

To learn more about conical container from the given link.

https://brainly.com/question/19357074

#SPJ11

1. Minimum   amount to save in a fixed term is  approximately $37,565.22.

2. Minimum monthly sales volume for the employee - approximately $66,666.67.

1. To calculate the minimum amount   that should be savedin a fixed term to receive at  least $43,200.00 in interest at the end of the year, we can set up the   following equation -  

Principal + Interest = Total Amount

Let x be the  amount saved in the fixed term.

x + 0.15x =$43,200.00

1.15x = $43,200.00

x = $43,200.00 / 1.15

x ≈ $37,565.22

2. To find the minimum   monthly sales volume   for the employee who wants to earn  a salary of 3%of sales, we can set up the following equation -  

0.03x =$ 2,000.00

x = $2,000.00 /0.03

x ≈ $66,666.67

Learn more about Sales Volume at:

https://brainly.com/question/29432171

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:

A man from serves an inheritance of 400,000. 00 and plans to save a part of it in a fixed term, earning 15% annual interest. And another part lend it with a mortgage guarantee, earning 7% annual interest. What? Minimum amount you should save in a fixed term at the end of the year you want to receive at least $43,200. 00 in concept of interest?

A parts salesman earned last year a fixed monthly salary of $2,000. 00, plus a percentage of 1% on sales. However, this year he has decided to give up this employment contract and ask his boss for only 3% of sales as a salary. What is the minimum monthly sales volume for this employee?

The equation of the circle that passes through the point (3, 4) and has its center at the origin is [tex]$x^{2} + y^{2} = 25$[/tex].

Given a point (3, 4) on the circle, to write an equation of the circle that passes through the given point and has its center at the origin, we need to find the radius (r) of the circle using the distance formula.

The distance formula is given as:

Distance between two points:  

[tex]$d = \sqrt{(x_{2} - x_{1})^{2} + (y_{2} - y_{1})^{2}}$[/tex]

Let the radius of the circle be r.

Now, the coordinates of the center of the circle are (0, 0), which means that the center is the origin of the coordinate plane. We have one point (3, 4) on the circle. So, we can find the radius of the circle using the distance formula as:

[tex]$$r = \sqrt{(0 - 3)^{2} + (0 - 4)^{2}}  = \sqrt{9 + 16} = \sqrt{25} = 5[/tex]

Therefore, the radius of the circle is 5.

Now, the standard equation of a circle with radius r and center (0, 0) is:

[tex]$$x^{2} + y^{2} = r^{2}$$[/tex]

Substitute the value of the radius in the above equation, we get the equation of the circle that passes through the given point and has its center at the origin as:

[tex]$$x^{2} + y^{2} = 5^{2} = 25$$[/tex]

To learn more about radius, refer here:

https://brainly.com/question/9854642

#SPJ11