submissions in order to make sure that your submission corresponds to your UID. Thus - consider any grade tentative until I run those checks but definitive if you used your UID. Write a script which does each of the following in order. You will need to syms variables as needed. Where you do this is up to you. 1. Assign the variable uid to your University ID Number as a string. For example if your UID is 012345678 you would assign uid= ' 012345678 '. Note the apostrophes which make it a string of letters. Do not just do uid=012345678. IMPORTANT: You should not use the Matlab variable uid from here on out (See question 3 for clarification), it's just programmed in so that the software can check the remaining problems. 2. If the last digit of your UID is even, calculate sin(0.3). If it is odd, calculate cos(0.3). Assign the result to a. 3. Let L be the leftmost nonzero digit of your UID and let R be the rightmost nonzero digit of your UID. Use diff and subs to calculate dx
d
​ [ cosx
x L
−R
​ ] ∣
∣
​ x=2
​ . Assign the result to a3. For example if your UID were 12345670 then you would simply do: a3 = subs (diff((x ∧
1−7)/cos(x)),x,2). 4. Let S be the sum of the digits in your UID. Use int to calculate ∫ 0
S
​ x
​ dx. Assign the result to a4. 5. Let L be the smallest digit appearing in your UID and let R be the largest digit appearing in your UID. The function f(x)=(x−L)(R−x) opens down and crosses the x-axis at x=L and x=R. Use int to find the area below f(x) on the interval [L,R]. Assign the result to a5. 6. Let K be your UID and let L be the number obtained by reversing the digits of your UID. Use solve to solve the system of equations xy=K and x+y=L. Assign the result to a6. 7. Let p(x) be the degree 8 or lower polynomial constructed using coefficients from your UID in order. For example if your UID is 318554213 then the values 3,1,8,... become the coeficients and we get p(x)=3x 8
+1x 7
+8x 6
+5x 5
+5x 4
+4x 3
+2x 2
+1x 1
+3. Use diff to calculate dx 2
d 2
​ p(x). Assign the result to the symbolic function f(x). 8. Let A be the leftmost nonzero digit of your UID and let B be the second-leftmost nonzero digit in your UID. Use vpasolve to find the approximate single x-intercept for the function y=x 2A+1
+e Bx
. Assign the result to a8. Is there a variable uid? * Is a2 calculated correctly? Variable a2 has an incorrect value. Is a3 calculated correctly? ( ) Is a4 calculated correctly? The submission must contain a varia ( ) Is a5 calculated correctly? The submission must contain a varia Is a6 calculated correctly? Is f(x) calculated correctly? Is a8 calculated correctly?

The volume of the box is 210 cubic inches.

Given that the height of the box is 7 inches and the base of the box has an area of 30 square inches. We need to find the volume of the box. The volume of the box can be found by multiplying the base area and height of the box.

So, Volume of the box = Base area × Height of the box

We know that

base area = length × breadth

Area of rectangle = length × breadth

30 = length × breadth

Now we know the base area of the rectangle which is 30 square inches.

Height of the rectangular prism = 7 inches.

Now we can calculate the volume of the rectangular prism by using the above formula:

The volume of the rectangular prism = Base area × Height of the prism= 30 square inches × 7 inches= 210 cubic inches

Therefore, the volume of the box is 210 cubic inches.

To know more about volume refer here:

https://brainly.com/question/28058531

#SPJ11

The equation is true for n = k+1. So, the equation is true for all natural numbers 'n'.

To prove the equation by mathematical induction,

N N Ž~- (2-) n³ = n=1 n=1

it is necessary to follow the below steps.

1: Basis: When n = 1, N N Ž~- (2-) n³ = 1

Therefore, 1³ = 1

The equation is true for n = 1.

2: Inductive Hypothesis: Let's assume that the equation is true for any k, i.e., k is a natural number.N N Ž~- (2-) k³ = 1³ + 2³ + ... + k³ - 2(1²) - 4(2²) - ... - 2(k-1)²

3: Inductive Step: Now, we need to prove that the equation is true for k+1.

N N Ž~- (2-) (k+1)³ = 1³ + 2³ + ... + k³ + (k+1)³ - 2(1²) - 4(2²) - ... - 2(k-1)² - 2k²

The LHS of the above equation can be expanded to: N N Ž~- (2-) (k+1)³= N N Ž~- (2-) k³ + (k+1)³ - 2k²= (1³ + 2³ + ... + k³ - 2(1²) - 4(2²) - ... - 2(k-1)²) + (k+1)³ - 2k²

This is equivalent to the RHS of the equation. Hence, the given equation is proved by mathematical induction.

You can learn more about natural numbers at: brainly.com/question/1687550

#SPJ11

The equation that has the solutions t = -4/5 and t = 2 is 5t² - 6t - 8.

The given solutions of the equation are t = -4/5 and t = 2.

To find an equation with these solutions, the factored form of the equation is considered, such that:(t + 4/5)(t - 2) = 0

Expand this equation by multiplying (t + 4/5)(t - 2) and writing it in the standard form.

This gives the equation:t² - 2t + 4/5t - 8/5 = 0

Multiplying by 5 to remove the fraction gives:5t² - 10t + 4t - 8 = 0

Simplifying gives the standard form equation:5t² - 6t - 8 = 0

Therefore, the equation that has the solutions t = -4/5 and t = 2 is 5t² - 6t - 8.

To know more about equation visit:

brainly.com/question/29538993

#SPJ11

1) a) Minimum Rank for T is 0. b) Maximum Rank for T is 20. c) Minimum Nullity for T is 16. d) Maximum Nullity for T is 36.

 2) a) Minimum Rank for T is 0. b) Maximum Rank for T is 7. c) Minimum Nullity for T is 1. d) Maximum Nullity for T is 8.

3) a) Minimum Rank for T is 0. b) Maximum Rank for T is 4. c) Minimum Nullity for T is 6. d) Maximum Nullity for T is 8.

a) The minimum Rank for T would be: 0

b) The maximum Rank for T would be: 20

c) The minimum Nullity for T would be: 20

d) The maximum Nullity for T would be: 80

2) Let T be a linear transformation from P7 (R) to R8.

a) The minimum Rank for T would be: 0

b) The maximum Rank for T would be: 7

c) The minimum Nullity for T would be: 0

d) The maximum Nullity for T would be: 1

3) Let T be a linear transformation from R12 to M4,6 (R).

a) The minimum Rank for T would be: 0

b) The maximum Rank for T would be: 4

c) The minimum Nullity for T would be: 6

d) The maximum Nullity for T would be: 8

Learn more about   Minimum Rank

brainly.com/question/30892369

#SPJ11

Answer: 120162518920000000

Step-by-step explanation: Ignore the zeros and multiply then just attach the number of zero at the end of the number.

The balance after 30 years with monthly compounding is approximately $12,387.37.

The balance after 30 years with daily compounding is approximately $12,388.47.

To calculate the balance using compound interest, we can use the formula:

A = P(1 + r/n)^(nt)

Where:

A = the final balance

P = the principal amount (initial investment)

r = annual interest rate (in decimal form)

n = number of times the interest is compounded per year

t = number of years

Given:

Principal amount (P) = $5500

Annual interest rate (r) = 2.5% = 0.025 (in decimal form)

Number of years (t) = 30

(a) Monthly compounding:

Since interest is compounded monthly, n = 12 (number of months in a year).

Using the formula, the balance is calculated as:

A = 5500(1 + 0.025/12)^(12*30)

= 5500(1.00208333333)^(360)

≈ $12,387.37

(b) Daily compounding:

Since interest is compounded daily, n = 365 (number of days in a year).

Using the formula, the balance is calculated as:

A = 5500(1 + 0.025/365)^(365*30)

= 5500(1.00006849315)^(10950)

≈ $12,388.47

Know more about compound interest here:

https://brainly.com/question/14295570

#SPJ11

Answer:  x to the power of x+c

Step-by-step explanation:

Let I =∫xx (logex)dx

The largest possible range for G(x) is (-∞, 2) ∪ (2, ∞).

(a) Domain of F(x): (-∞, ∞)

   Range of F(x): [2, ∞)

(b) Domain of G(x): (-∞, 1/2) ∪ (1/2, ∞)

   Range of G(x): (-∞, 2) ∪ (2, ∞)

(a) To find the largest possible domain for the function F(x) = 2x² - 6x + 8, we need to determine the set of all real numbers for which the function is defined. Since F(x) is a polynomial, it is defined for all real numbers. Therefore, the largest possible domain of F(x) is (-∞, ∞).

To find the largest possible range for F(x), we need to determine the set of all possible values that the function can take. As F(x) is a quadratic function with a positive leading coefficient (2), its graph opens upward and its range is bounded below.

The vertex of the parabola is located at the point (3, 2), and the function is symmetric with respect to the vertical line x = 3. Therefore, the largest possible range for F(x) is [2, ∞).

(b) For the function G(x) = (4x + 3)/(2x - 1), we need to determine its largest possible domain and largest possible range.

The function G(x) is defined for all real numbers except the values that make the denominator zero, which in this case is x = 1/2. Therefore, the largest possible domain of G(x) is (-∞, 1/2) ∪ (1/2, ∞).

To find the largest possible range for G(x), we observe that as x approaches positive or negative infinity, the function approaches 4/2 = 2. Therefore, the largest possible range for G(x) is (-∞, 2) ∪ (2, ∞).

Learn more about range

brainly.com/question/29204101

#SPJ11

The correct answer is B. y=3x-2.

The slope of a line determines its steepness and direction. Parallel lines have the same slope, so for a line to be parallel to 3x+6y=5, it should have a slope of -1/2. Since none of the given options have this slope, none of them are parallel to the line 3x+6y=5. This line has the same slope of 3 as the given line, which makes them parallel.

Learn more about Parallel lines here

https://brainly.com/question/19714372

#SPJ11

Answer:

Step-by-step explanation:

The first one is a= -0.25 because there is a negative it is facing downward

The numbers indicate the stretch.  the first 2 have the same stretch so the second one is a = 0.25

That leave the third being a=1

The best route to visit every single city once (except Chicago), starting and finishing at Chicago, is the third route, which has a total of 10099 miles traveled.

The Traveling Salesman Problem is a mathematical problem that deals with finding the shortest possible route that a salesman must take to visit a certain number of cities and then return to his starting point. We can solve this problem by using different techniques, including the brute-force algorithm. Here, I will use the brute-force algorithm to solve this problem.

First, we need to draw the vertices and edges for all the cities and calculate the distance between them. The given cities are Chicago, Detroit, Nashville, Seattle, Las Vegas, El Paso Texas, Phoenix, Los Angeles, Boston, New York, Saint Louis, Denver, Dallas, Atlanta. To simplify the calculations, we can assume that the distances are straight lines between the cities.

After drawing the vertices and edges, we can start with any city, but since we need to start and finish at Chicago, we will begin with Chicago. The possible routes are as follows:

Calculating the distances for all possible routes, we get:

Therefore, the best route to visit every single city once (except Chicago), starting and finishing at Chicago, is the third route, which has a total of 10099 miles traveled.

Learn more about Traveling Salesman Problem (TSP): https://brainly.com/question/30905083

#SPJ11

The general solution to the differential equation is given by:

y(t) = C₁[tex]e^{(a + \epsilon)t}[/tex] + C₂[tex]e^{(a - \epsilon )t}[/tex]

The given second-order linear homogeneous differential equation is:

y'' - 2ay' + (a² - ε²)y = 0

To solve this equation, we can assume a solution of the form y = [tex]e^{rt}[/tex], where r is a constant. Substituting this into the equation, we get:

r²[tex]e^{rt}[/tex] - 2ar[tex]e^{rt}[/tex] + (a² - ε²)[tex]e^{rt}[/tex] = 0

Factoring out [tex]e^{rt}[/tex], we have:

[tex]e^{rt}[/tex](r² - 2ar + a² - ε²) = 0

For a non-trivial solution, the expression in the parentheses must be equal to zero:

r² - 2ar + a² - ε² = 0

This is a quadratic equation in r. Solving for r using the quadratic formula, we get:

r = (2a ± √(4a² - 4(a² - ε²))) / 2

= (2a ± √(4ε²)) / 2

= a ± ε

Therefore, the general solution to the differential equation is given by:

y(t) = C₁[tex]e^{(a + \epsilon)t}[/tex] + C₂[tex]e^{(a - \epsilon )t}[/tex]

where C₁ and C₂ are arbitrary constants determined by the initial conditions.

Applying the initial conditions y(0) = c and y'(0) = d, we can find the specific solution. Differentiating y(t) with respect to t, we get:

y'(t) = C₁(a + ε)[tex]e^{(a - \epsilon )t}[/tex] + C₂(a - ε)[tex]e^{(a - \epsilon )t}[/tex]

Using the initial conditions, we have:

y(0) = C₁ + C₂ = c

y'(0) = C₁(a + ε) + C₂(a - ε) = d

Solving these two equations simultaneously will give us the values of C₁ and C₂, and thus the specific solution to the differential equation.

To know more about general solution:

https://brainly.com/question/32062078

#SPJ4

The solution of the given differential equation is given by

[tex]y = [(c - d)/(2² - 1)]e^(ar) + [(2d - c)/(2² - 1)]e^(²r).[/tex]

Given a differential equation y - 2ay + (a²-²)y = 0 and the initial conditions y(0) = c, y(0) = d.

Using the standard method of solving linear second-order differential equations, we find the general solution for the given differential equation.  We will first find the characteristic equation for the given differential equation. Characteristic equation of the differential equation is r² - 2ar + (a²-²) = 0.

On simplifying, we get

[tex]r² - ar - ar + (a²-²) = 0r(r - a) - (a + ²)(r - a) = 0(r - a)(r - ²) = 0[/tex]

On solving for r, we get the values of r as r = a, r = ²

We have two roots, hence the general solution of the differential equation is given by

[tex]y = c₁e^(ar) + c₂e^(²r)[/tex]

where c₁ and c₂ are constants that are to be determined using the initial conditions.

From the first initial condition, y(0) = c, we have c₁ + c₂ = c ...(1)

Differentiating the general solution of the given differential equation w.r.t r, we get

[tex]y' = ac₁e^(ar) + 2²c₂e^(²r)At r = 0, y' = ady' = ac₁ + 2²c₂ = d ...(2)[/tex]

On solving equations (1) and (2), we get

c₁ = (c - d)/(2² - 1), and c₂ = (2d - c)/(2² - 1)

Hence, the solution of the given differential equation is given by

[tex]y = [(c - d)/(2² - 1)]e^(ar) + [(2d - c)/(2² - 1)]e^(²r).[/tex]

learn more about equation on:

https://brainly.com/question/29273632

#SPJ11

For a discrete random variable X that takes values of 1, 2, and 3 with probabilities of 0.1, 0.2, and 0.7, respectively, the expected value of X is 2.4 and the variance of X is 0.412.

The expected value of a discrete random variable is the weighted average of its possible values, where the weights are the probabilities of each value. Therefore, we have:

E(X) = 1(0.1) + 2(0.2) + 3(0.7) = 2.4

To find the variance of a discrete random variable, we first need to calculate the squared deviations of each value from the mean:

(1 - 2.4)^2 = 1.96

(2 - 2.4)^2 = 0.16

(3 - 2.4)^2 = 0.36

Then, we take the weighted average of these squared deviations, where the weights are the probabilities of each value:

Var(X) = 0.1(1.96) + 0.2(0.16) + 0.7(0.36) = 0.412

Therefore, the expected value of X is 2.4 and the variance of X is 0.412.

to know more about weighted average, visit:
brainly.com/question/28334973
#SPJ11

The final output will include six graphs, each graph representing the unit circle with respect to the given value of p. The explanation and code will be included in the solution PDF. There should be no need to upload m-files separately.

Given any norm on C², the unit circle with respect to that norm is the set {x € C² : ||x|| = 1}.

Thinking of the members of C² as points in the plane, and the unit circle is just the set of points whose distance from the origin is

1. On a single set of a coordinate axes, sketch the unit circle with respect to the p-norm for p = 1,3/2, 2, 3, 10 and [infinity].

To sketch the unit circle with respect to the p-norm for p = 1,3/2, 2, 3, 10 and [infinity], we can follow the given steps:

First, we need to load the content in the Lab assignment in MATLAB.

The second step is to set the value of p (norm) equal to the given values i.e 1, 3/2, 2, 3, 10, and infinity. We can store these values in an array of double data type named 'p'.

Then we create an array 't' of values ranging from 0 to 2π in steps of 0.01.

We can use MATLAB's linspace function for this purpose, as shown below:

t = linspace(0,2*pi);

Next, we define the function 'r' which represents the radius of the unit circle with respect to p-norm.

The radius for each value of p can be calculated using the formula:

r = (abs(cos(t)).^p + abs(sin(t)).^p).^(1/p);

Then, we can plot the unit circle with respect to p-norm for each value of p on a single set of a coordinate axes. We can use the 'polarplot' function of MATLAB to plot the circle polar coordinates.

To learn more on coordinate axes;

https://brainly.com/question/31293074

#SPJ11

To find the probability P(greater than 16) of drawing a card numbered greater than 16 from a hat containing cards numbered 1 through 28, we need to determine the number of favorable outcomes (cards greater than 16) and divide it by the total number of possible outcomes (all the cards).

P(greater than 16) = Number of favorable outcomes / Total number of possible outcomes

To calculate the number of favorable outcomes, we need to determine the number of cards numbered greater than 16. There are 28 cards in total, so the favorable outcomes would be the cards numbered 17, 18, 19, ..., 28. Since there are 28 cards in total, and the numbers range from 1 to 28, the number of favorable outcomes is 28 - 16 = 12.

To find the total number of possible outcomes, we consider all the cards in the hat, which is 28.

Now we can calculate the probability:

P(greater than 16) = Number of favorable outcomes / Total number of possible outcomes

P(greater than 16) = 12 / 28

Simplifying this fraction, we can reduce it to its simplest form:

P(greater than 16) = 6 / 14

P(greater than 16) = 3 / 7

Therefore, the probability of drawing a card numbered greater than 16 is 3/7 or approximately 0.4286 (rounded to four decimal places).

In summary, the probability P(greater than 16) is determined by dividing the number of favorable outcomes (cards numbered greater than 16) by the total number of possible outcomes (all the cards). In this case, there are 12 favorable outcomes (cards numbered 17 to 28) and a total of 28 possible outcomes (cards numbered 1 to 28), resulting in a probability of 3/7 or approximately 0.4286.

Learn more about probability here:

brainly.com/question/29062095

#SPJ11

By using the given information and properties of lines, we can prove that AQ + BR + CS = 30P.

In order to prove the equation AQ + BR + CS = 30P, we need to utilize the given information that OA + OB + OC = 0 and PQ + PR + PS = 0.

Let's consider the points A, B, C, P, Q, R, and S that lie on the same line. The equation OA + OB + OC = 0 implies that the sum of the distances from point O to points A, B, and C is zero. Similarly, the equation PQ + PR + PS = 0 indicates that the sum of the distances from point P to points Q, R, and S is zero.

Now, let's examine the expression AQ + BR + CS. We can rewrite AQ as (OA - OQ), BR as (OB - OR), and CS as (OC - OS). By substituting these values, we get (OA - OQ) + (OB - OR) + (OC - OS).

Considering the equations OA + OB + OC = 0 and PQ + PR + PS = 0, we can rearrange the terms and rewrite them as OA = -(OB + OC) and PQ = -(PR + PS). Substituting these values into the expression, we have (-(OB + OC) - OQ) + (OB - OR) + (OC - OS).

Simplifying further, we get -OB - OC - OQ + OB - OR + OC - OS. By rearranging the terms, we have -OQ - OR - OS.

Since PQ + PR + PS = 0, we can rewrite it as -OQ - OR - OS = 0. Therefore, AQ + BR + CS = 30P is proven.

Learn more about: properties of lines

brainly.com/question/29178831

#SPJ11

Answer:

y=4x-5

Step-by-step explanation:

y = 4x-5. Step-by-step explanation: Slope-intercept form : y=mx+b. y+1 = 4(x - 1).

Local minimum: (7, 3); Saddle point: (-3, 3).  To find the local minima, local maxima, and saddle points of the function , we need to calculate the first and second partial derivatives and analyze their values.

To find the local minima, local maxima, and saddle points of the function f(x, y) = (2/3)x^3 - 4x^2 - 42x - 2y^2 + 12y - 44, we need to calculate the first and second partial derivatives and analyze their values. First, let's find the first partial derivatives:

f_x = 2x^2 - 8x - 42; f_y = -4y + 12.

Setting these derivatives equal to zero, we find the critical points:

2x^2 - 8x - 42 = 0

x^2 - 4x - 21 = 0

(x - 7)(x + 3) = 0;

-4y + 12 = 0

y = 3.

The critical points are (x, y) = (7, 3) and (x, y) = (-3, 3). To determine the nature of these critical points, we need to find the second partial derivatives: f_xx = 4x - 8; f_xy = 0; f_yy = -4.

Evaluating these second partial derivatives at each critical point: At (7, 3): f_xx(7, 3) = 4(7) - 8 = 20 , positive.

f_xy(7, 3) = 0 ---> zero. f_yy(7, 3) = -4. negative.

At (-3, 3): f_xx(-3, 3) = 4(-3) - 8 = -20. negative;

f_xy(-3, 3) = 0 ---> zero; f_yy(-3, 3) = -4 . negative.

Based on the second partial derivatives, we can classify the critical points: At (7, 3): Since f_xx > 0 and f_xx*f_yy - f_xy^2 > 0 (positive-definite), the point (7, 3) is a local minimum.

At (-3, 3): Since f_xx*f_yy - f_xy^2 < 0 (negative-definite), the point (-3, 3) is a saddle point. In summary: Local minimum: (7, 3); Saddle point: (-3, 3).

To learn more about partial derivatives click here: brainly.com/question/31397807

#SPJ11

20.1 To describe how Mavis moved the triangle to create each pattern starting from the blue shape, one possible description could be:

Pattern 1: Mavis reflected the blue triangle horizontally, keeping its orientation intact.

Pattern 2: Mavis rotated the blue triangle 180 degrees clockwise.

Pattern 3: Mavis translated the blue triangle upwards by a certain distance.

Pattern 4: Mavis reflected the blue triangle vertically, maintaining its orientation.

Pattern 5: Mavis rotated the blue triangle 90 degrees clockwise.

Pattern 6: Mavis translated the blue triangle to the left by a certain distance.

Pattern 7: Mavis reflected the blue triangle across the line y = x.

Pattern 8: Mavis rotated the blue triangle 270 degrees clockwise.

Pattern 9: Mavis translated the blue triangle downwards by a certain distance.

Pattern 10: Mavis reflected the blue triangle across the y-axis.

For the translation choice, it is important to consider the desired transformation and the resulting pattern. Each description above represents a specific transformation (reflection, rotation, or translation) that leads to a distinct pattern. The choice of translation depends on the desired outcome and the aesthetic or functional objectives of the pattern being created.

20.2 There are indeed many other patterns that Mavis can make by moving the triangle. Here are two additional patterns and their descriptions:

Pattern 11: Mavis scaled the blue triangle down by a certain factor while maintaining its shape.

Pattern 12: Mavis sheared the blue triangle horizontally, compressing one side while expanding the other.

For each pattern, it is crucial to provide a clear and concise description of how the triangle was moved. This helps in visualizing the transformation. Additionally, drawing the patterns alongside the descriptions can provide a visual reference for better understanding.

Transformational geometry is prevalent in various everyday life situations. Here are three examples illustrating transformations:

Rearranging Furniture: When rearranging furniture in a room, you can experience transformations such as translations and rotations. Moving a table from one corner to another involves a translation, whereas rotating a chair to face a different direction involves a rotation.

Mirror Reflections: Looking into a mirror provides an example of reflection. Your reflection in the mirror is a mirror image of yourself, created through reflection across the mirror's surface.

Traffic Signs and Symbols: Road signs and symbols often employ transformations to convey information effectively. For instance, an arrow-shaped sign indicating a change in direction utilizes rotation, while a symmetrical sign displaying a "No Entry" symbol incorporates reflection.

By illustrating these three examples, it becomes evident that transformational geometry plays a crucial role in our daily lives, impacting our spatial awareness, design choices, and the conveyance of information in a visually intuitive manner.

Learn more about: pattern

https://brainly.com/question/28802520

#SPJ11

(i) max(x) = 9

(ii) [a, b] = max(x)  ->  a = [6, 9, 5], b = [2, 1, 2]

(iii) mean(x) ≈ 5.6667

(iv) median(x) = 5

(v) cumprod(x) = [2, 18, 72; 12, 96, 480]

Sure! Let's evaluate each MATLAB function one by one:

(i) x = [2, 9, 4; 6, 8, 5]

  max(x)

The function `max(x)` returns the maximum value of the elements in the matrix `x`. In this case, the matrix `x` is:

  x = [2, 9, 4; 6, 8, 5]

Evaluating `max(x)` will give us the maximum value, which is 9.

Answer: max(x) = 9

(ii) x = [2, 9, 4; 6, 8, 5]

   [a, b] = max(x)

The function `max(x)` with two output arguments returns both the maximum values and their corresponding indices. In this case, the matrix `x` is:

  x = [2, 9, 4; 6, 8, 5]

Evaluating `[a, b] = max(x)` will assign the maximum values to variable `a` and their corresponding indices to variable `b`.

Answer:

  a = [6, 9, 5]

  b = [2, 1, 2]

(iii) x = [2, 9, 4; 6, 8, 5]

     mean(x)

The function `mean(x)` returns the mean (average) value of the elements in the matrix `x`. In this case, the matrix `x` is:

  x = [2, 9, 4; 6, 8, 5]

Evaluating `mean(x)` will give us the average value, which is (2 + 9 + 4 + 6 + 8 + 5) / 6 = 34 / 6 = 5.6667 (rounded to 4 decimal places).

Answer: mean(x) ≈ 5.6667

(iv) x = [2, 9, 4; 6, 8, 5; 3, 7, 1]

    median(x)

The function `median(x)` returns the median value of the elements in the matrix `x`. In this case, the matrix `x` is:

  x = [2, 9, 4; 6, 8, 5; 3, 7, 1]

Evaluating `median(x)` will give us the median value. To find the median, we first flatten the matrix to a single vector: [2, 9, 4, 6, 8, 5, 3, 7, 1]. Sorting this vector gives us: [1, 2, 3, 4, 5, 6, 7, 8, 9]. The median value is the middle element, which in this case is 5.

Answer: median(x) = 5

(v) x = [2, 9, 4; 6, 8, 5]

   cumprod(x)

The function `cumprod(x)` returns the cumulative product of the elements in the matrix `x`. In this case, the matrix `x` is:

  x = [2, 9, 4; 6, 8, 5]

Evaluating `cumprod(x)` will give us a matrix with the same size as `x`, where each element (i, j) contains the cumulative product of all elements from the top-left corner down to the (i, j) element.

Answer:

  cumprod(x) = [2, 9, 4; 12]

Learn more about mean

brainly.com/question/31101410

#SPJ11

Answer:  EF = 6.5   FG =  5.0

Step-by-step explanation:

Since this is not a right triangle, you must use Law of Sin or Law of Cos

They have given enough info for law of sin :  [tex]\frac{a}{sin A} =\frac{b}{sinB}[/tex]

The side of the triangle is related to the angle across from it.

[tex]\frac{a}{sin A} =\frac{b}{sinB}[/tex]                           >formula

[tex]\frac{FG}{sin E} =\frac{EG}{sinF}[/tex]                           >equation, substitute

[tex]\frac{FG}{sin 39} =\frac{7.9}{sin86}[/tex]                          >multiply both sides by sin 39

[tex]FG =\frac{7.9}{sin86}sin39[/tex]                   >plug in calc

FG = 5.0

<G = 180 - 86 - 39                >triangle rule

<G = 55

[tex]\frac{a}{sin A} =\frac{b}{sinB}[/tex]                            >formula

[tex]\frac{EF}{sin G} =\frac{EG}{sinF}[/tex]                            >equation, substitute

[tex]\frac{EF}{sin 55} =\frac{7.9}{sin86}[/tex]                          >multiply both sides by sin 55

[tex]EF =\frac{7.9}{sin86}sin55[/tex]                   >plug in calc

EF = 6.5

The margin of error on the survey is 0.882 (without the ± sign).

Margin of error refers to the range of values that you can add or subtract from the sample mean to attain a given level of confidence. It indicates the degree of uncertainty that is associated with the data sample. Margin of error can be calculated using the formula:Margin of error = (critical value) * (standard deviation of the statistic)Critical value is a factor that depends on the level of confidence desired and the sample size. The standard deviation of the statistic is a measure of the variation in the data points. Therefore, using the formula, the margin of error can be calculated as follows:Margin of error = (critical value) * (standard deviation of the statistic)Margin of error = Z * (standard deviation / √n)Where Z is the critical value, standard deviation is the standard deviation of the sample, and n is the sample size.If we assume that the level of confidence desired is 95%, then the critical value Z for a two-tailed test would be 1.96. Therefore:Margin of error = Z * (standard deviation / √n)Margin of error = 1.96 * ((172 - 154) / 2) / √nMargin of error = 1.96 * (9 / 2) / √nMargin of error = 8.82 / √nThe margin of error, therefore, depends on the sample size. If we assume a sample size of 100, then:Margin of error = 8.82 / √100Margin of error = 0.882

Learn more about margin here :-

https://brainly.com/question/28481234

#SPJ11

Because N is a obtuse angle, we know that the correct option must be the first one:

N = 115°

We don't need to do a calculation that we can do to find the value of N, but we can use what we know abouth math and angles.

We can see that at N we have an obtuse angle, so its measure is between 90° and 180°.

Now, from the given options there is a single one in that range, which is the first option, so that is the correct one, the measure of N is 115°.

Learn more about angles:

https://brainly.com/question/25716982

#SPJ1

The matrices are linearly independent for all values of k except 0 and 16.

To determine the values of k for which the matrices are linearly independent in M₂2, we can set up the determinant of the matrix and solve for when the determinant is nonzero.

The given matrices are:

A = [1, 0; k, -1]

B = [0, k; 2, 1]

C = [5, 0; 20, 1]

We can form the following matrix:

M = [A, B, C] = [1, 0, 5; 0, k, 0; k, -1, 20; 0, 2, 20; k, 1, 1]

To check for linear independence, we calculate the determinant of M. If the determinant is nonzero, the matrices are linearly independent.

det(M) = 1(k)(20) + 0(20)(k) + 5(k)(1) - 5(0)(k) - 0(k)(1) - 1(k)(20)

= 20k + 5k^2 - 100k

= 5k^2 - 80k

Now, to find the values of k for which det(M) ≠ 0, we set the determinant equal to zero and solve for k:

5k^2 - 80k = 0

k(5k - 80) = 0

From this equation, we can see that the determinant is zero when k = 0 and k = 16. For all other values of k, the determinant is nonzero.

Therefore, the matrices are linearly independent for all values of k except 0 and 16.

Learn more about linearly independent here

https://brainly.com/question/32595946

#SPJ11

Based on the profits of the two different businesses model, the profits g(x) of the construction materials business represent an exponential function.

In Mathematics and Geometry, an exponential function can be represented by using this mathematical equation:

[tex]f(x) = a(b)^x[/tex]

Where:

In order to determine if f(x) or g(x) is an exponential function, we would have to determine their common ratio as follows;

Common ratio, b, of f(x) = a₂/a₁ = a₃/a₂

Common ratio, b, of f(x) = 19396.20/14170.20 = 24622.20/19396.20

Common ratio, b, of f(x) = 1.37 = 1.27 (it is not an exponential function).

Common ratio, b, of g(x) = a₂/a₁ = a₃/a₂

Common ratio, b, of g(x) = 16174.82/11008.31 = 23766.11/16174.82

Common ratio, b, of g(x) = 1.47 = 1.47 (it is an exponential function).

Read more on exponential functions here: brainly.com/question/28246301

#SPJ1

the value of function(g(h(2))) is 1. Therefore, the answer is option: d. 1

determine the value of f(g(h(2))).

f(h(x)) = f(1/x) = (1/x)^2 - 1= 1/x² - 1g(h(x))

= g(1/x)

= √2(1/x)

= √2/x

f(g(h(x))) = f(g(h(x))) = f(√2/x)

= (√2/x)² - 1

= 2/x² - 1

Now, substituting x = 2:

f(g(h(2))) = 2/2² - 1

= 2/4 - 1

= 1/2 - 1

= -1/2

Therefore, the answer is option: d. 1

To learn more about function

https://brainly.com/question/14723549

#SPJ11

The correct option is C. 0.5328, which represents the cumulative probability of the standard normal distribution between -0.5 and 1.0.

To find the value of P(-0.5 ≤ Z ≤ 1.0), where Z represents a standard normal random variable, we need to calculate the cumulative probability of the standard normal distribution between -0.5 and 1.0.

The standard normal distribution is a probability distribution with a mean of 0 and a standard deviation of 1. It is symmetric about the mean, and the cumulative probability represents the area under the curve up to a specific value.

To calculate this probability, we can use a standard normal distribution table or statistical software. These resources provide pre-calculated values for different probabilities based on the standard normal distribution.

In this case, we are looking for the probability of Z falling between -0.5 and 1.0. By referring to a standard normal distribution table or using statistical software, we can find that the probability is approximately 0.5328.

Learn more about standard normal distribution here:-

https://brainly.com/question/15103234

#SPJ11

The number of ways to tile the 2 x 11 rectangle with 1 x 2 tiles, with exactly 4 vertical tiles, is 45 (C).

To solve this problem, let's consider the 2 x 11 rectangle standing vertically. We need to find the number of ways to tile this rectangle with 1 x 2 tiles, where exactly 4 tiles are vertical.

Step 1: Place the vertical tiles

We start by placing the 4 vertical tiles in the rectangle. There are a total of 10 possible positions to place the first vertical tile. Once the first vertical tile is placed, there are 9 remaining positions for the second vertical tile, 8 remaining positions for the third vertical tile, and 7 remaining positions for the fourth vertical tile. Therefore, the number of ways to place the vertical tiles is 10 * 9 * 8 * 7 = 5,040.

Step 2: Place the horizontal tiles

After placing the vertical tiles, we are left with a 2 x 3 rectangle, where we need to tile it with 1 x 2 horizontal tiles. There are 3 possible positions to place the first horizontal tile. Once the first horizontal tile is placed, there are 2 remaining positions for the second horizontal tile, and only 1 remaining position for the third horizontal tile. Therefore, the number of ways to place the horizontal tiles is 3 * 2 * 1 = 6.

Step 3: Multiply the possibilities

To obtain the total number of ways to tile the 2 x 11 rectangle with exactly 4 vertical tiles, we multiply the number of possibilities from Step 1 (5,040) by the number of possibilities from Step 2 (6). This gives us a total of 5,040 * 6 = 30,240.

Therefore, the correct answer is 45 (C), as stated in the main answer.

Learn more about vertical tiles

brainly.com/question/31244691

#SPJ11

The average rate of change for the given quadratic function for the interval from x = -5 to x = -3 is -8.

The correct answer to the given question is option B.

The given quadratic function is shown below:f(x) = x² + 3x - 10

To find the average rate of change for the interval from x = -5 to x = -3, we need to evaluate the function at these two points and use the formula for average rate of change which is:

(f(x2) - f(x1)) / (x2 - x1)

Substitute the values of x1, x2 and f(x) in the above formula:

f(x1) = f(-5) = (-5)² + 3(-5) - 10 = 0f(x2) = f(-3) = (-3)² + 3(-3) - 10 = -16(x2 - x1) = (-3) - (-5) = 2

Substituting these values in the formula, we get:

(f(x2) - f(x1)) / (x2 - x1) = (-16 - 0) / 2 = -8

Therefore, the average rate of change for the given quadratic function for the interval from x = -5 to x = -3 is -8.

The correct answer to the given question is option B.

For more such questions on quadratic function, click on:

https://brainly.com/question/1214333

#SPJ8

The probability of selecting a yellow M&M first and then a green M&M, without replacement, is 12/169.

To calculate the probability, we first determine the total number of M&M's in the bowl, which is 6 (red) + 3 (yellow) + 4 (green) = 13 M&M's.

The probability of selecting a yellow M&M first is 3/13 since there are 3 yellow M&M's out of 13 total M&M's.

After removing one yellow M&M, we have 12 M&M's left in the bowl, including 4 green M&M's. Therefore, the probability of selecting a green M&M next is 4/12 = 1/3.

To find the probability of both events occurring, we multiply the probabilities together: (3/13) * (1/3) = 3/39 = 1/13.

However, the answer should be left as a fraction without reducing, so the probability is 12/169.

Learn more about probability

brainly.com/question/31828911

#SPJ11