Two bar magnets are hung from metal rods and held in the position shown below. A rectangular box with 2 black lines running straight down from it, each to a horizontal bar magnet labeled N to the left and S to the right. There is a gap between the magnets. The magnets are released and swing freely. Which diagram best predicts their final position? A rectangular box with 2 black lines running down from it, each to a horizontal bar magnet labeled N to the left and S to the right. There is a gap between the magnets. The magnets are both hanging to the left. A rectangular box with 2 black lines running down from it, each to a horizontal bar magnet labeled N to the left and S to the right. There is a gap between the magnets. The left magnet hangs to the left. The right magnet hangs to the right. A rectangular box with 2 black lines running down from it, each to a horizontal bar magnet labeled N to the left and S to the right. There is a gap between the magnets. The left magnet hangs to the right. The right magnet hangs to the left. A rectangular box with 2 black lines running down from it, each to a horizontal bar magnet labeled N to the left and S to the right. There is a gap between the magnets. The left magnet hangs straight down. The right magnet hangs to the right.

Explanation:

Mole ratio of H2SO4 to NaOH = 1 : 2.

Moles of NaOH

= Moles of H2SO4 * (2/1)

= 23.1mol * (2/1)

= 46.2mol. (A)

Answer:

true

Explanation: all matter down to the molecular or even atomic level has a constant vibration and movement. The only time that any matter could stop moving would be at absolute zero.

Answer:

oxygen is an example of a diatomic molecule found in earth's atmosphere!

Explanation:

Natural selection cannot work if beneficial traits are not hereditary

Answer:

favors organisms well adapted to the environment

cannot work if beneficial traits are not hereditary

is often called survival of the fittest

Explanation:

NOT

is random

happens by chance

Answer:

asthenosphere

Explanation:

What is being described in the question above, that is a soft weak like layer the upper part of the mantle where lithospheric plates is known as the asthenosphere. In the study of earth's mantle, the asthenosphere is one of the region that can be overlooked as it constitutes part of the upper mantle with its counterpart; lithosphere.

Some of the properties of asthenosphere is the fact it has high temperature, it is viscous and it is ductile. It is also characterized by its density.

The products : Zn₃(PO₄)₂ (s) + KClO₃ (aq)

Given

reaction: Zn(ClO₃)₂ (aq) + K₃PO₄ (aq)

Required

The products

Solution

Double-Replacement reactions :  an ion exchange between two ion compounds in the reactant to form two new ion compounds in the product

General formula :

AB + CD ⇒ AD + CB

One of the characteristics of the double replacement reaction is the presence of precipitated compounds

Zn(ClO₃)₂ (aq) + K₃PO₄ (aq) ⇒ Zn₃(PO₄)₂ (s) + KClO₃ (aq)

Zn₃(PO₄)₂ (s)⇒ precipitated compounds, so that this reaction can occur

Answer:

196.96655

Explanation:

The answer is 196.96655. I assume you are converting between grams Gold and mole. The molecular formula for Gold is Au. The SI base unit for the amount of substance is the mole.

The quantity present in an atom or molecules of a given substance is called moles it is written as mol and is calculated with the help of molar mass and mass of the given substance.

0.507699 mol is present in the 100 gm of gold.

Given,

The formula for calculating moles is:

[tex]\rm Moles (n) = \dfrac{Mass}{Molar \;mass}[/tex]

Substituting values in the formula:

[tex]\begin{aligned}\rm n & = \dfrac{100}{196.967}\\\\ & = 0.507699 \;\rm mol\\\\& = 0.5077\;\rm mol\end{aligned}[/tex]

Therefore, 0.5077 mol is present in 100 gm of gold.

Learn more about moles here:

https://brainly.com/question/6260819

Answer:

The pressure correction in the ideal gas equation accounts for the intermolecular attractive forces between gas molecules. Vanderwaal constant 'a' measures the magnitude of intermolecular attractive forces between the particles.  

Thevolume correction to the total volume per mole occupied by gas molecules, it closely corresponds to the volume per mole of the liquid state, whose molecules are closely layered. Vanderwaal constant 'b' measures the volume excluded by a mole of particles.

Vander waals equation followed by real gas is:

[tex](P+\frac{an^2}{V^2})(V-nb)=nRT[/tex]

where,

P = pressure of gas

V = volume of gas

n = number of moles of gas

R = gas constant

T = temperature of gas

Answer:

The correct answer is -

1. 1 grain of sand = 244 red blood cells.

2. 1 penny = 2439

Explanation:

A normal red blood cell has a normal disk diameter of 6.2 - 8.2 micron or micrometer is way small than a grain of sand which ranges in diameter from 0.0625 mm (or ​1⁄16 mm) to 2 mm. The size of the diameter of a penny is given 0.02 m.

Let take the highest value of them:

RBC = 8.2 micrometer

The grain of sand = 2 mm

Penny = 0.02 m

we know:

1 meter = 10e+6 or 100000 micron

1 millimeter = 1000 micron

then, the grain of sand = 2* 1000 = 2000

so, the 1 grain sand = 2000/8.2

= 244

Similarly,

Penny = 0.02*100000= 20000

= 2439

Thus, the correct answer is =

1. 1 grain of sand = 244 red blood cells.

2. 1 penny = 2439

Answer:

0.0917 mol Co(CrO₄)₃

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

37.3 g Co(CrO₄)₃

Step 2: Identify Conversions

Molar Mass of Co - 58.93 g/mol

Molar Mass of Cr - 52.00 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of Co(CrO₄)₃ - 58.93 + 3(52.00) + 12(16.00) = 406.93 g/mol

Step 3: Convert

[tex]37.3 \ g \ Co(CrO_4)_3(\frac{1 \ mol \ Co(CrO_4)_3}{406.93 \ g \ Co(CrO_4)_3} )[/tex] = 0.091662 mol Co(CrO₄)₃

Step 4: Check

We are given 3 sig figs. Follow sig fig rules and round.

0.091662 mol Co(CrO₄)₃ ≈ 0.0917 mol Co(CrO₄)₃

Answer:

A all organisms are made of 1 or more cells

Answer:

Option C

Explanation:

A) A chemical equation is simply the symbolic representation of a chemical reaction using the form of symbols and formulae. Thus, option A is not the answer.

B) A product is the substance that shows at the end of a chemical reaction. Thus, option B is not the answer.

C) Law of conservation of mass in chemistry states that even in chemical reactions or physical transformations, that mass cannot be created nor destroyed. Which means that mass is conserved. This has nothing to do with chemical change demonstrated chemical reactions. Thus, option C is correct.

D) reaction rate is the speed that a chemical reaction occurs. Thus, options D is not correct.

Answer:

From left box to right box: Footwall, fault plane, hanging wall

Explanation:

A foot wall is the one holding us the hanging wall so the highest piece. Think of rock climbing. You put your feet on the wall or rocks to push yourself up. The foot wall is the rocks for the hanging wall.

The hanging wall is the part that's "hanging" from the other wall. So the lowest one. Think of it as the part that's hanging.

A fault plane is where the place where the fault happens which would be where there is the difference in elevations originate from. Think of it like the crack in the middle.

Don't be afraid to reach out if you need further help, I hope this helps!

Answer:

Consuming electricity: Burning fossil fuels emits CO2, with coal releasing twice as much of the gas as petroleum. Worldwide, fossil fuels generate 85 percent of electricity. The number of coal-burning plants will increase as China and India continue to industrialize.

Answer:

a particle with no charge is a neutron.

Answer:

I got fluorine for my guess

Explanation:

Answer:

It's D Nitrogen with 3.04

Answer:

63.55 g

Explanation:

The relation between molecular (formula) mass and molar mass Page 4 4 • To obtain one mole of copper atoms (6.02 x 1023 atoms), weigh out 63.55 g copper. The molar mass (M) of a substance is the mass of one mole of entities (atoms, molecules, or formula units) of the substance.

Answer:

63.55 Grams.

Explanation:

Answer:

B! i just learned this last week lol!

Explanation:

hope this helps♡♡

Answer:

c.all atoms have the same arrangement for electrons

Answer:

C because the number of protons and neutrons add up to make the number of electrons.

Answer: The ionic formula of compound is [tex]CoP[/tex] and the name is cobalt phosphide.

Explanation:

For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.

Here element Co is having an oxidation state of +3 called as [tex]Co^{3+}[/tex] cation and phosphprous forms [tex]P^{3-}[/tex] anion with oxidation state of -3. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]CoP[/tex]

The nomenclature of ionic compounds is given by:

1. Positive is written first followed by the oxidation state of metal in roman numerals in square brackets.

2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written is '-ide'.

Thus the name of [tex]CoP[/tex] is cobalt phosphide.

Answer: A

Explanation: TOOK THE QUIZ !))   200 YEARS AGOO

Answer:  the vibration becomes faster

Explanation:

Answer:

21 periodic tables equals alot of stuff

Explanation:

Answer:

It's polar

Explanation:

Hydrogen has an EN of 2.1 and Fluorine an EN of 4.0 (highest EN of any element). So do:  4.0−2.1=1.9.

Answer:

solid iodine chlorine gas

The correct order for ranking solid iodine, liquid bromine, and chlorine gas in order of increasing intermolecular force strength is;  chlorine gas < liquid bromine < solid iodine.

Intermolecular forces are forces that hold substances together in a particular state of matter. Intermolecular forces increase in the order; gases < liquids < solids. Solids have the highest magnitude of intermolecular interaction between particles.

Bearing this in mind, the correct order for ranking solid iodine, liquid bromine, and chlorine gas in order of increasing intermolecular force strength is;  chlorine gas < liquid bromine < solid iodine.

Learn more: https://brainly.com/question/9328418

moles Cl⁻ : 0.00197

mass NaCl : 0.115

% purity : 95.83%

Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution

[tex]\large \boxed {\bold {M ~ = ~ \dfrac {n} {V}}}[/tex]

Where

M = Molarity

n = Number of moles of solute

V = Volume of solution

So to find the number of moles can be expressed as

n = V x M

Reaction

AgNO₃ + NaCl ⇒ AgCl + NaNO₃

Molarity(concentration) of AgNO₃ = 0.1 mol/dm³(L) = 0.1 M

Volume=V of AgNO₃ = 19.7 ml(cm³)

so mol of AgNO₃ :

[tex]\tt mol=M\times V\\\\mol=0.1~mol/L\times 0.0197~L\\\\mol=0.00197[/tex].

From the equation, mol ratio AgNO₃ : NaCl  = 1 ; 1, so mol NaCl= mol AgNO₃= 0.00197

NaCl⇒Na⁺+Cl⁻

mol Cl⁻ : mol NaCl = 1 : 1, mol Cl⁻ = 0.00197

[tex]\tt mass=mol\times MW\\\\mass= 0.00197\times 58.5=0.115~g[/tex]

[tex]\tt \%purity=\dfrac{mass~NaCl}{mass~rock}\times 100\%\\\\\%purity=\dfrac{0.115}{0.12}\times 100\%=95.83\%[/tex]

Answer:

....? What-

Explanation:

Answer:

The correct option is;

By first reversing Reaction 2 and then adding the enthalpy of Reaction 1 and the enthalpy of reaction 2

Explanation:

The given reactions are;

1) C₂H₂ (g) +  2H₂ (g)  → C₂H₆ (g)     [tex]{}[/tex]      ΔH = -75 kcal

2) C₂H₄ (g) +  H₂ (g)  → C₂H₆ (g)     [tex]{}[/tex]      ΔH = -33 kcal

3) C₂H₂ (g) +  H₂ (g)  → C₂H₄ (g)     [tex]{}[/tex]      ΔH = ?

By reversing reaction (2) and subtracting the reactants from the products we then have followed by adding the enthalpy of reaction 1 to the value of the enthalpy of the (reversed) reaction 2, we have;

C₂H₂ (g) + 2H₂ (g)  → C₂H₆ (g)     [tex]{}[/tex]      ΔH = -75 kcal

C₂H₆ (g) → C₂H₄ (g) + H₂ (g)       [tex]{}[/tex]       ΔH = 33kcal

Adding, and cancelling out the italicized terms which are repeated in the product and reactants, we get

C₂H₂ (g) + H₂ (g) → C₂H₄ (g)       [tex]{}[/tex]   ΔH = -75 kcal + 33 kcal = -42 kcal

Therefore, the correct option is "by first reversing Reaction 2 and then adding the enthalpy of Reaction 1 and the enthalpy of reaction 2"

Answer:

polar

Explanation:

because interaction between them is hydrogen bonds

Answer:

El mismo nivel, pero diferente subnivel y orbital

Explanation:

En un átomo, el número cuántico principal n muestra el nivel de energía del electrón.

Si dos electrones tienen el mismo valor del número cuántico principal n, simplemente significa que están en el mismo nivel de energía.

Sin embargo, cuando los números cuánticos l y ml difieren, los electrones deben estar en diferentes subniveles y orbitales.