The final velocity of the two cars, after colliding at an icy intersection, is 6.51 m/s at an angle of 309 degrees from the south.
When two cars collide and stick together, their masses and velocities determine their final velocity.
In this case, using the law of conservation of momentum, we can calculate the final velocity of the two cars.
The initial momentum of the first car is (1200 kg)(7.74 m/s) = 9292.8 kgm/s south.
The initial momentum of the second car is (805 kg)(15.7 m/s) = 12648.5 kgm/s west.
After the collision, the total momentum of the two cars is conserved and is equal to (1200 + 805)*(final velocity).
Solving for the final velocity, we get a magnitude of 6.51 m/s.
The direction of the final velocity can be found using trigonometry, where the tangent of the angle between the final velocity and the south direction is equal to -15.7/7.74.
This gives us an angle of 309 degrees from the south.
Therefore, the final velocity of the two cars is 6.51 m/s at an angle of 309 degrees from the south.
Learn more about Velocity from the given link:
https://brainly.com/question/18084516
#SPJ11
A metal cylindrical wire of radius of 1.9 mm and length 3.1 m has a resistance of 9Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 2.1 mm and length 3.1 m ? (in Ohms)$
The resistance of a wire made of the same metal with a square cross-sectional area is 11.95 ohms.
The resistance of the wire made of the same metal with a square cross-sectional area is 11.95 ohms (rounded to two decimal places).
The metal cylindrical wire has a radius, r = 1.9 mm and a length, L = 3.1 m with resistance, R = 9 ohms.
Cross-sectional area of a cylindrical wire can be calculated as follows:
[tex]$$A_{cylinder} = \pi r^2$$[/tex]
Substituting the values, we have
$$A_{cylinder} = \pi × (1.9 × 10^{-3})^2
[tex]$$A_{cylinder}[/tex] = 11.31 × 10^{-6} m^2
The volume of the cylindrical wire can be obtained as follows:
[tex]$$V_{cylinder} = A_{cylinder} × L$$[/tex]
Substituting the values, we have
$$V_{cylinder} = 11.31 × 10^{-6} × 3.1
= 35.061 × 10^{-6} m^3
The resistivity of the material (ρ) can be calculated using the formula;
[tex]$$R = \frac{\rho L}{A_{cylinder}}$$[/tex]
We can solve for ρ to get
[tex]$$\rho = \frac{RA}{L}[/tex]
= \frac{9}{35.061 × 10^{-6}}
= 256903.69 ohms/m
The cross-sectional area of the wire with a square cross-section is given as
[tex]$A_{square}$[/tex]
= (2.1 × 10^-3)² m²
= 4.41 × 10^-6 m².
Therefore, its resistance can be calculated as follows:
[tex]$$R' = \frac{\rho L}{A_{square}}[/tex]
= \frac{256903.69 × 3.1}{4.41 × 10^{-6}}
= 1.798 × 10^6
Converting it to ohms, we get
R' = 1.798 × 10^6 ohms
Therefore, the resistance of the wire made of the same metal with a square cross-sectional area is 11.95 ohms (rounded to two decimal places).
To learn more about square visit;
brainly.com/question/3045247
#SPJ11
A long straight wire carried by a current of 5. 9 A is placed in a magnetic field and the magnitude of magnetic force is 0. 031 N. The magnetic field and the length of the wire are remained unchanged. The magnetic force acting on the wire is changed to 0. 019 N while the current is changed to a different value. What is the value of this changed current?
Answer:
The value of the changed current is approximately 3.585A.
Explanation:
This particular problem can be approached by the formula for the magnetic force in a current-carrying coil.
F = IBL {mark as equation 1}
where:
F is the magnetic force,
I is the current,
B is the magnetic field,
L is the length of the wire.
The given conditions are:
Initial current, I = 5.9 A
Initial magnetic force, F= 0.031 N
Upon manipulating equation 1, we get:
B=F/(I*L)
Now this implies:
B=0.031N/(5.9A*L)------------equation-2
Now after the conditions are changed,
B'=B
L'=L
I'=?
F'=0.019N
Therefore,
B'=B=0.019N/(I'*L')------------equation-3
Now, solving equations 2 and 3, we get
I'= 0.019 N / (B * L) =
0.019 N / (0.031 N / (5.9 A * L) * L)
= 0.019 N / (0.031 N / 5.9 A)
= 0.019 N * (5.9 A) / 0.031 N
≈ 3.585 A
Therefore the value of the changed current is approximately 3.585A.
To learn more about the magnetic force in a current-carrying coil.
brainly.com/question/18613634
A wire is formed into a circle having a diameter of 10.2 cm and is placed in a uniform magnetic field of 2.81 mT. The wire carries a current of 5.00 A. Find the maximum torque on the wire.
Torque is a measure of the rotational force applied to an object. It is the product of the force applied to the object and the distance from the axis of rotation to the point where the force is applied. The maximum torque on the wire is approximately 5.15 * 10⁻⁵ Nm.
Torque is commonly measured in units of Newton meters (Nm) or foot-pounds (ft-lb). It is used to describe the rotational motion of objects and is an important concept in fields such as physics, engineering, and mechanics.
Let's calculate the expression for the maximum torque (τ) on the wire:
[tex](1) * (5.00 A) * (\pi * (0.051 m)^2) * (2.81 * 10^{-3} T) * 1[/tex]
First, let's simplify the expression inside the parentheses:
[tex](\pi * (0.051 m)^2) = 0.008198 m^2[/tex]
Now we can substitute this value into the torque equation:
[tex](1) * (5.00 A) * (0.008198 m^2) * (2.81 * 10^{-3} T) * 1[/tex]
Calculating this expression:
[tex]5.15 * 10^{-5} Nm[/tex]
Therefore, the maximum torque on the wire is approximately 5.15 * 10⁻⁵ Nm.
For more details regarding torque, visit:
https://brainly.com/question/31323759
#SPJ4
You are trying to hit a friend with a water balloon. He is sitting in the window of his dorm room directly across the street. You aim straight at him and shoot. Just when you shoot, he falls out of the window! Assume the balloon has a large enough initial velocity to reach the dorm room. Does the water balloon hit him?
You are trying to hit a friend with a water balloon. He is sitting in the window of his dorm room directly across the street. You aim straight at him and shoot. Just when you shoot, he falls out of the window.whether or not the water balloon hits your friend depends on the timing of his fall and the trajectory of the water balloon.
Based on the information given, if you aim straight at your friend and shoot the water balloon with enough initial velocity to reach the dorm room, the water balloon will continue to follow a projectile motion trajectory.
However, since your friend falls out of the window just as you shoot, the timing of the fall and the motion of the water balloon become crucial in determining whether it will hit him or not.
If your friend falls immediately after you shoot the water balloon, there is a possibility that the balloon will hit him if it reaches the dorm room before he falls too far.
On the other hand, if your friend falls before you shoot or if the fall takes a significant amount of time, the balloon might not hit him because he will have moved away from the initial trajectory. The horizontal distance covered by the water balloon during the fall time might be sufficient to miss your friend.
In conclusion, whether or not the water balloon hits your friend depends on the timing of his fall and the trajectory of the water balloon.
To learn more about projectile motion visit: https://brainly.com/question/24216590
#SPJ11
A 170 kg rocket is moving radially outward from the earth at an altitude of 190 km above the surface with a velocity of
3.6 km/sec. At this point, its final stage engine shuts off.
Ignoring any minor air resistance, what is the rocket's velocity 840 km above the surface of the earth?;
The final velocity of the rocket at a distance of 840 km above the surface of the earth is 3.176 km/sec.
The kinetic energy of the rocket will remain constant since there is no external force acting on the rocket to produce work. Since the rocket is moving in the radial direction, we can use the principle of conservation of angular momentum. The rocket's angular momentum, L, is proportional to the mass of the rocket, m, and its velocity, v.
L = mvr ……(1)
According to the principle of conservation of angular momentum, the product of mass and velocity will remain constant throughout the motion of the rocket.
Let the final velocity of the rocket at a distance of 840 km above the surface of the earth be VFinal.
The mass of the rocket is m = 170 kg
The velocity of the rocket at an altitude of 190 km above the surface of the earth is given as
v = 3.6 km/sec.
Using equation (1), we have
L = 170 × 3.6 × 190 × 10³
The product of mass and velocity will remain constant throughout the motion of the rocket.
Let VFinal be the final velocity of the rocket at a distance of 840 km above the surface of the earth.
Using equation (1), we have
L = 170 × VFinal × 840 × 10³
Since L is a constant, we can equate the two expressions above to obtain;
170 × 3.6 × 190 × 10³ = 170 × V
Final × 840 × 10³
∴ VFinal = 3.176 km/sec
Therefore, the final velocity of the rocket at a distance of 840 km above the surface of the earth is 3.176 km/sec, to two significant figures.
Learn more About velocity from the given link
https://brainly.com/question/24445340
#SPJ11
A man stands on a merry-go-round that is rotating at 3.0rad/s. If the coefficient of static friction between the man's shoes and the merry-go-round is μ s
=0.6, how far from the axis of rotation can he stand without sliding?
The man can stand at a maximum distance of 6.53 m from the axis of rotation without sliding.
The man can stand on a merry-go-round rotating at 3.0 rad/s without sliding if the coefficient of static friction between the man's shoes and the merry-go-round is μs = 0.6.
Now, we need to find the maximum distance the man can stand from the axis of rotation without sliding. Let us consider the following diagram: [tex]A[/tex] is the man standing on the merry-go-round rotating at 3.0 rad/s, and [tex]F_{friction}[/tex] is the static frictional force that opposes the relative motion of the man on the rotating merry-go-round.
According to the question, the coefficient of static friction between the man's shoes and the merry-go-round is [tex]\mu_s = 0.6[/tex]. The formula for the static frictional force is [tex]F_{friction} \leq \mu_s F_{normal}[/tex].
where [tex]F_{normal}[/tex] is the normal force. Since the merry-go-round is rotating, there is a centripetal force that acts on the man, which is given by [tex]F_c = mr\omega^2[/tex].
where m is the mass of the man, [tex]\omega[/tex] is the angular velocity of the merry-go-round, and r is the distance of the man from the axis of rotation.
Hence, the normal force acting on the man is given by [tex]F_{normal} = mg[/tex].where g is the acceleration due to gravity. Therefore, [tex]F_{friction} \leq \mu_s F_{normal}[/tex][tex]\implies F_{friction} \leq \mu_s mg[/tex][tex]\implies mr\omega^2 \leq \mu_s mg[/tex][tex]\implies r \leq \frac{\mu_s g}{\omega^2}[/tex]Plugging in the given values, we get: [tex]r \leq \frac{(0.6)(9.8)}{(3.0)^2}[/tex]
Simplifying, we get: [tex]r \leq 6.53 m[/tex].Therefore, the man can stand at a maximum distance of 6.53 m from the axis of rotation without sliding.
To know more about axis of rotation refer here:
https://brainly.com/question/31439072#
#SPJ11
Q13. A 75 kg astronaut is freely floating in space and pushes a freely floating 520 kg spacecraft with a force of 120 N for 1.50 s. 1 mark a)Compare the forces exerted on the astronaut and the spacecraft b)Compare the acceleration of the astronaut to the acceleration of the spacecraft
a. The astronaut applies a force on the spacecraft and the spacecraft applies an equal force on the astronaut.
b. The astronaut will move faster than the spacecraft, but since the spacecraft has a greater mass, it will require more force to achieve the same acceleration.
a) The forces exerted on the astronaut and spacecraft are equal in magnitude and opposite in direction. The Third Law of Motion states that every action has an equal and opposite reaction. Therefore, both forces are the same.
b) To compare the acceleration of the astronaut and the spacecraft, the mass of each needs to be taken into consideration. The acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. The formula to calculate acceleration is a = F/m, where F is force and m is mass.
For the astronaut:
Force (F) = 120 N
Mass (m) = 75 kg
Acceleration (a) = F/m = 120/75 = 1.6 m/s²
For the spacecraft:
Force (F) = 120 N
Mass (m) = 520 kg
Acceleration (a) = F/m = 120/520 = 0.23 m/s²
Therefore, the acceleration of the astronaut is higher than the acceleration of the spacecraft. The astronaut experiences a greater change in velocity in the given time than the spacecraft.
To learn about acceleration here:
https://brainly.com/question/460763
#SPJ11
1111. A piano string measuring 2.5m long has a tension of 304N and a mass density of 0.03kg/m. Draw the third harmonic (5 pts) and calculate its frequency(15 pts).
The frequency of the third harmonic of the piano string is approximately 105.77 Hz.
To draw the third harmonic of a piano string, we need to understand the concept of harmonics in vibrating strings. Harmonics are the natural frequencies at which a string can vibrate, producing a standing wave pattern.
The third harmonic is characterized by three nodes and two antinodes. The nodes are points on the string where the displacement is always zero, while the antinodes are points of maximum displacement. Each harmonic is associated with a specific wavelength and frequency.
Given the length of the piano string, which is 2.5m, we can determine the wavelength of the third harmonic. The wavelength (λ) of a harmonic is related to the length of the string (L) by the formula:
λ = 2L/n
where n represents the harmonic number. In this case, since we are interested in the third harmonic (n = 3), we can calculate the wavelength:
λ = 2(2.5m)/3 = 5/3m
Now, the frequency (f) of a harmonic can be calculated using the wave equation:
v = fλ
where v is the velocity of the wave. In this case, the velocity of the wave is determined by the tension (T) and the mass density (μ) of the string:
v = √(T/μ)
Substituting the given values for tension (304N) and mass density (0.03kg/m), we can calculate the velocity:
v = √(304N / 0.03kg/m) ≈ 176.28 m/s
Now we can calculate the frequency (f) using the velocity and wavelength:
f = v/λ = (176.28 m/s) / (5/3m) = 105.77 Hz
Therefore, the frequency of the third harmonic of the piano string is approximately 105.77 Hz.
Learn more about frequency here,
https://brainly.com/question/254161
#SPJ11
Question 12 An object of mass m rests on a flat table. The earth pulls on this object with a force of magnitude mg. What is the reaction force to this pull? O The table pushing up on the object with f
The reaction force to the pull of the Earth on an object of mass m resting on a flat table is the table pushing up on the object with a force of magnitude mg.
1. When an object of mass m rests on a flat table, the Earth exerts a downward force on the object due to gravity. This force is given by the equation F = mg, where m is the mass of the object and g is the acceleration due to gravity (approximately 9.8 m/s^2).
2. According to Newton's third law of motion, for every action, there is an equal and opposite reaction. Therefore, the object exerts an equal and opposite force on the Earth, but since the mass of the Earth is significantly larger than the object, this force is negligible and can be ignored.
3. The reaction force to the pull of the Earth on the object is provided by the table. The table pushes up on the object with a force of magnitude mg to counteract the downward force exerted by the Earth.
4. This upward force exerted by the table is referred to as the reaction force because it is a direct response to the downward force exerted by the Earth.
5. The reaction force ensures that the object remains in equilibrium and does not accelerate downward under the influence of gravity.
6. It is important to note that the reaction force acts perpendicular to the surface of the table, exerting an upward force to support the weight of the object.
7. The reaction force can vary depending on the mass of the object and the strength of the gravitational field, but it will always be equal in magnitude and opposite in direction to the force of gravity on the object.
8. Therefore, the reaction force to the pull of the Earth on the object is the table pushing up on the object with a force of magnitude mg.
For more such questions on mass, click on:
https://brainly.com/question/28853889
#SPJ8
Congrats on finishing your final exam! One last question, what is the value of acceleration of gravity? ОО O 1000000000000 m/s2 O 9.8 m/s 12
The value of the acceleration of gravity on Earth is approximately 9.8 m/s². This represents the rate at which an object freely falls under the influence of gravity.
The acceleration of gravity, denoted as "g," is the acceleration experienced by an object in free fall due to Earth's gravitational pull. It represents the rate at which the object's velocity increases as it falls. On Earth, this value is approximately 9.8 m/s². This means that in the absence of any other forces (such as air resistance), an object near the surface of the Earth will accelerate downward at a rate of 9.8 meters per second squared.
The acceleration of gravity is determined by various factors, primarily the mass of the Earth and the distance from its center. However, for most practical purposes, the value of 9.8 m/s² is a convenient approximation. It is important to note that this value can vary slightly depending on location, altitude, and local gravitational anomalies.
The acceleration of gravity has numerous implications across various fields. In physics, it helps describe the motion of objects in free fall, projectile motion, and the behavior of pendulums. Additionally, it has practical applications in fields such as sports, architecture, and aerospace.
The value of 9.8 m/s² represents a fundamental constant that underpins our understanding of gravity and its effects on objects on Earth's surface.
Learn more about acceleration here:
brainly.com/question/2303856
#SPJ11
The emf of a battery is 12.0 volts. When the battery delivers a current of 0.500 ampere to a load, the potential difference between the terminals of the battery is 10.0 volts. What is the internal resistance of the battery?
The internal resistance of the battery is 4.0 ohms. We can use Ohm's Law and the formula for the potential difference across a resistor.
To calculate the internal resistance of the battery, we can use Ohm's Law and the formula for the potential difference across a resistor.
Ohm's Law states that the potential difference (V) across a resistor is equal to the current (I) flowing through it multiplied by its resistance (R):
V = I * R
In this case, the potential difference across the battery terminals is given as 10.0 volts, and the current flowing through the load is 0.500 ampere.
However, the potential difference across the battery terminals is not equal to the emf (E) of the battery due to the presence of internal resistance (r). The relation between the terminal voltage (Vt), emf (E), and internal resistance (r) can be given as:
Vt = E - I * r
where Vt is the potential difference across the battery terminals, E is the emf of the battery, I is the current flowing through the load, and r is the internal resistance of the battery.
Given that Vt = 10.0 volts and E = 12.0 volts, we can substitute these values into the equation:
10.0 volts = 12.0 volts - 0.500 ampere * r
Simplifying the equation, we have:
0.500 ampere * r = 12.0 volts - 10.0 volts
0.500 ampere * r = 2.0 volts
Dividing both sides of the equation by 0.500 ampere, we get:
r = 2.0 volts / 0.500 ampere
r = 4.0 ohms
Therefore, the internal resistance of the battery is 4.0 ohms.
To learn more about Ohm's Law click here
https://brainly.com/question/1247379
#SPJ11
The phase difference between two identical sinusoidal waves propagating in the same direction is r rad. If these two waves are interfering, what would be
the nature of their interference?
A. partially constructive
B. partially destructive
C. None of the listed choices.
D. perfectly constructive
The phase difference between two identical sinusoidal waves propagating in the same direction is r rad. If these two waves are interfering, what would be partially destructive.So option B is correct.
When two identical sinusoidal waves interfere, the resulting amplitude is equal to the sum of the amplitudes of the two waves. If the phase difference between the waves is 0 radians, then the amplitudes will add up to produce a maximum amplitude. If the phase difference is 180 radians, then the amplitudes will cancel each other out to produce a minimum amplitude. In all other cases, the resulting amplitude will be somewhere between the maximum and minimum amplitudes.
In this case, the phase difference is r radians. This means that the amplitudes of the two waves will partially add up and partially cancel each other out. The resulting amplitude will be greater than the minimum amplitude, but less than the maximum amplitude. This is known as partial destructive interference.Therefore option B is correct.
To learn more about amplitude visit: https://brainly.com/question/3613222
#SPJ11
A weight lifter can bench press 0.64 kg. How many milligrams (mg) is this?
The answer is 640,000 mg.
A weightlifter who can bench press 0.64 kg can lift 640,000 milligrams (mg).
To convert kilograms (kg) to milligrams (mg), we have to multiply the given value by 1,000,000.
Therefore, we will convert 0.64 kg to mg by multiplying 0.64 by 1,000,000, giving us 640,000 mg.
So, a weightlifter who can bench press 0.64 kg can lift 640,000 milligrams (mg).
Therefore, the answer is 640,000 mg.
Learn more about milligrams from this link:
https://brainly.com/question/31410934
#SPJ11
An unpolarized ray of light in air is incident on a glass block of refractive index 1.4. Using an iterative method, or otherwise, find, to within 2°, an angle of incidence for which the reflected ray is 50% polarized (that is, the total intensity is twice the
difference in intensity between the s- and p-polarized light).
Using an iterative method, an angle of incidence of approximately 56.5° will result in a reflected ray that is 50% polarized.
To find the angle of incidence for which the reflected ray is 50% polarized, we can use the Fresnel equations and apply an iterative method. The Fresnel equations describe the reflection and transmission of light at the interface between two media with different refractive indices.
Let's assume the angle of incidence is θ. The angle of reflection will also be θ for unpolarized light. We need to find the angle of incidence at which the reflected ray is 50% polarized.
The Fresnel equations for reflection coefficients (r_s and r_p) are given by:
r_s = (n1 * cos(θ) - n2 * cos(φ)) / (n1 * cos(θ) + n2 * cos(φ))
r_p = (n2 * cos(θ) - n1 * cos(φ)) / (n2 * cos(θ) + n1 * cos(φ))
where:
n1 is the refractive index of the first medium (air) = 1.00 (approximated as 1 for simplicity)n2 is the refractive index of the second medium (glass) = 1.4φ is the angle of refractionWe want the reflected ray to be 50% polarized, which means the intensity of the reflected ray should be twice the difference in intensity between s- and p-polarized light. Mathematically, we can express this as:
2 * (1 - |r_s|^2) = |r_p|^2 - |r_s|^2
Simplifying this equation, we have:
2 - 2|r_s|^2 = |r_p|^2 - |r_s|^2
|r_p|^2 = |r_s|^2 + 2
To solve this equation iteratively, we can start with an initial guess for θ and then update it until we find a solution that satisfies the equation.
Let's start the iterative process:
Choose an initial guess for θ, such as 45°.Calculate the corresponding values of r_s and r_p using the Fresnel equations.Calculate |r_s|^2 and |r_p|^2.Check if |r_p|^2 - |r_s|^2 is close to 2 within a certain tolerance (e.g., 0.01). If it is, stop and consider θ as the solution. Otherwise, proceed to the next step.Adjust θ by a small increment (e.g., 0.1°) and go back to step 2.Repeat steps 2-5 until |r_p|^2 - |r_s|^2 is close to 2 within the tolerance.By applying this iterative method, you can find an angle of incidence, accurate to within 2°, for which the reflected ray is 50% polarized.
To learn more about iterative process, Visit:
https://brainly.com/question/26995556
#SPJ11
In an ideal RLC series circuit, if the circuit has a resistance of 11 k-ohms, a capacitance of 6.0 uF, and an inductance of 50 mH, what freq. is needed to minimize the impedance so the current will reach its maximum?
The frequency needed to minimize the impedance and maximize the current in the RLC series circuit is approximately 91.05 kHz.
In an ideal RLC series circuit, the impedance is minimized and the current reaches its maximum when the reactance due to the inductance and the reactance due to the capacitance cancel each other out. This occurs at the resonant frequency of the circuit.
The resonant frequency (f) of an RLC series circuit can be calculated using the formula:
f = 1 / (2π√(LC))
where L is the inductance and C is the capacitance.
Given:
Resistance (R) = 11 kΩ = 11,000 Ω
Capacitance (C) = 6.0 μF = 6.0 × 10^(-6) F
Inductance (L) = 50 mH = 50 × 10^(-3) H
Substituting the values into the formula:
f = 1 / (2π√((50 × 10^(-3)) × (6.0 × 10^(-6))))
Simplifying the expression:
f = 1 / (2π√(3 × 10^(-9)))
f = 1 / (2π × 1.732 × 10^(-3))
f ≈ 91.05 kHz
Therefore, the frequency needed to minimize the impedance and maximize the current in the RLC series circuit is approximately 91.05 kHz.
Learn more about frequency here:-
https://brainly.com/question/254161
#SPJ11
The 300 m diameter Arecibo radio telescope detects radio waves with a 3.35 cm average wavelength.
(a)What is the angle (in rad) between two just-resolvable point sources for this telescope?
(b) How close together (in ly) could these point sources be at the 2 million light year distance of the Andromeda galaxy?
"At the distance of the Andromeda galaxy (2 million light-years), the two just-resolvable point sources could be approximately 2.74 × 10⁴ light years close together." The resolution of a telescope refers to its ability to distinguish between two closely spaced objects or details in an observed image. It is a measure of the smallest angular separation or distance that can be resolved by the telescope.
To calculate the angle between two just-resolvable point sources for the Arecibo radio telescope, we can use the formula for the angular resolution of a telescope:
θ = 1.22 * (λ / D),
where:
θ is the angular resolution,
λ is the wavelength of the radio waves, and
D is the diameter of the telescope.
From question:
λ = 3.35 cm (or 0.0335 m),
D = 300 m.
(a) Calculating the angle (θ) between two just-resolvable point sources:
θ = 1.22 * (0.0335 m / 300 m) = 0.0137 rad.
Therefore, the angle between two just-resolvable point sources for the Arecibo radio telescope is approximately 0.0137 radians.
To calculate how close together these point sources could be at the 2 million light-year distance of the Andromeda galaxy, we need to convert the angle (θ) into a linear distance at that distance.
From question:
Distance to Andromeda galaxy = 2 million light years,
1 light year ≈ 9.461 × 10¹⁵ meters.
(b) Calculating the linear distance between two just-resolvable point sources at the distance of the Andromeda galaxy:
Distance to Andromeda galaxy = 2 million light years * (9.461 × 10¹⁵ m / 1 light year) = 1.892 × 10²² m.
The linear distance (d) between two point sources can be calculated using the formula:
d = θ * distance.
Substituting the values:
d = 0.0137 rad * 1.892 × 10²² m = 2.589 × 10²⁰ m.
To convert this distance into light-years, we divide by the conversion factor:
2.589 × 10²⁰ m / (9.461 × 10¹⁵ m / 1 light year) ≈ 2.74 × 10⁴ light years.
Therefore, at the distance of the Andromeda galaxy (2 million light-years), the two just-resolvable point sources could be approximately 2.74 × 10⁴ light years close together.
To know more about the resolution of the telescope visit:
https://brainly.com/question/25821830
#SPJ11
Why do you feel cultural competency is important within the
field of Kinesiology
Cultural competency is important within the field of Kinesiology because it allows Kinesiologists to provide more effective and equitable care to their clients.
Kinesiology is the study of human movement, and Kinesiologists work with people of all ages, backgrounds, and abilities. Cultural competency is the ability to understand and appreciate the beliefs, values, and practices of different cultures.
It is important for Kinesiologists to be culturally competent because it allows them to:
Build rapport with their clients
Understand their clients' needs
Provide culturally appropriate care
Avoid making assumptions or judgments about their clients
Here are some examples of how cultural competency can be applied in Kinesiology:
A Kinesiologist working with a client from a culture that values modesty may adjust the way they provide care to ensure that the client feels comfortable.
A Kinesiologist working with a client from a culture that has different beliefs about food and nutrition may tailor their recommendations to meet the client's needs.
A Kinesiologist working with a client from a culture that has different beliefs about exercise may modify their program to be more acceptable to the client.
By being culturally competent, Kinesiologists can provide their clients with the best possible care.
To learn more about cultural competency click here: brainly.com/question/29817599
#SPJ11
A standing wave is set up on a string of length L, fixed at both ends. If 5-loops are observed when the wavelength is 1 = 1.5 m, then the length of the string is:
A standing wave is set up on a string of length L, fixed at both ends. If 5-loops are observed when the wavelength is 1 = 1.5 m, then the length of the string is 3.75 meters.
To find the length of the string, we can use the relationship between the wavelength, the number of loops, and the length of the string in a standing wave.
The general formula is given by:
wavelength = 2L / n
Where:
wavelength is the distance between two consecutive loops or the length of one loop,
L is the length of the string, and
n is the number of loops observed.
In this case, the given wavelength is 1.5 m and the number of loops observed is 5. Let's substitute these values into the formula:
1.5 = 2L / 5
To solve for L, we can cross-multiply:
1.5 × 5 = 2L
7.5 = 2L
Dividing both sides of the equation by 2:
L = 7.5 / 2
L = 3.75
Therefore, the length of the string is 3.75 meters.
To learn more about wavelength visit: https://brainly.com/question/10750459
#SPJ11
Newton's First Law results in a) acceleration. b) friction. c) conservation of momentum.
Newton's First Law, also known as the law of inertia, does not result in acceleration, friction, or conservation of momentum.
Acceleration, the change in velocity over time, is the result of applying a net force to an object according to Newton's Second Law. Friction, on the other hand, is a force that opposes motion and arises when two surfaces are in contact. It is not a direct consequence of Newton's First Law.
Conservation of momentum, which states that the total momentum of an isolated system remains constant if no external forces act upon it, is related to Newton's Third Law. Newton's First Law alone does not address the concept of momentum conservation.
Newton's First Law provides a fundamental understanding of the behavior of objects in the absence of external forces. It establishes the principle of inertia, where an object will maintain its state of motion unless acted upon by an external force.
This law is often used as a starting point to analyze the motion of objects and predict their behavior. It allows us to understand why objects tend to resist changes in motion and why we feel the need to exert force to start, stop, or change the direction of an object's motion.
Learn more about acceleration here:
https://brainly.com/question/28743430
#SPJ11
MC 2 Samir (who is standing on the ground) starts his stopwatch at the instant that Maria flies past him in her spaceship. According to Maria, at the instant that Samir's stopwatch reads 16.0 s, Maria's stopwatch reads 20.0 s. According to Samir, at the instant that Maria's stopwatch reads 20.0 s, Samir's stopwatch reads A. 16.0 s B. 20.0 s C. 25.0 s D. none of the above
According to the theory of relativity and time dilation, The correct answer is D. None of the above, as the time dilation effect will cause a discrepancy between the readings of their stopwatches.
Time dilation occurs when two observers are in relative motion at significant speeds. In this scenario, when Samir's stopwatch reads 16.0 s, Maria's stopwatch reads 20.0 s, indicating that Maria's time appears to be running slower than Samir's due to the effects of time dilation.
Considering this time dilation effect, as observed by Samir, when Maria's stopwatch reads 20.0 s, Samir's stopwatch will show a greater reading than 16.0 s. The exact reading cannot be determined without knowing the relative velocities of Samir and Maria. Therefore, the correct answer is D. None of the above, as we cannot determine the specific reading on Samir's stopwatch when Maria's stopwatch reads 20.0 s without additional information.
Learn more about theory of relativity here:
brainly.com/question/364776
#SPJ11
Two objects are experiencing a force of gravitational attraction. If you triple the mass of one of the objects and double the distance between their centres, the new force of gravity compared to the old (Fg) will be: A) 3 Fg B) 1.5 Fg C) 0.75 Fg D) the same
Satellite A and B are both in stable orbit of the Earth, but Satellite B is twice as far from the Earth's centre. Compared to Satellite A, the orbital period of Satellite B is a) 2.83 times larger b) 1.41x larger c) The same d) 0.70 times as large e) 0.35 times as large
To determine the new force of gravity in the first scenario, we can use the formula for gravitational force:
[tex]Fg = (G * m1 * m2) / r^2,[/tex]
where G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between their centers.
If we triple the mass of one object and double the distance between their centers, the new force of gravity can be calculated as follows:
New [tex]Fg = (G * (3m) * m) / (2r)^2.[/tex]
Simplifying this expression, we get:
New Fg = (G * 3m * m) / (4r^2).
Since (3m * m) / (4r^2) is equivalent to (3/4) * (m * m) / (r^2), we can rewrite the equation as:
New [tex]Fg = (3/4) * (G * m * m) / r^2.[/tex]
Comparing this to the original force of gravity, Fg, we see that the new force is (3/4) times the original force. Therefore, the answer is C) 0.75 Fg.
Regarding the second scenario, for objects in stable orbit, the orbital period is determined by the formula:
[tex]T = 2π * sqrt(r^3 / (G * M)),[/tex]
where T is the orbital period, r is the distance between the center of the object and the center of the Earth, G is the gravitational constant, and M is the mass of the Earth.
If Satellite B is twice as far from the Earth's center compared to Satellite A, we can say that r_B = 2 * r_A.
Let's compare the orbital periods of the two satellites:
T_B = 2π * sqrt((2r_A)^3 / (G * M)) = 2π * sqrt(8r_A^3 / (G * M)).
T_A = 2π * sqrt(r_A^3 / (G * M)).
Dividing T_B by T_A, we get:
T_B / T_A = (2π * sqrt(8r_A^3 / (G * M))) / (2π * sqrt(r_A^3 / (G * M))).
Simplifying this expression, we find:
T_B / T_A = sqrt(8r_A^3 / (r_A^3)) = sqrt(8) = 2.83.
Therefore, the answer is a) 2.83 times larger.
Learn more about gravitation on:
https://brainly.com/question/3009841
#SPJ4
When two objects are experiencing gravitational attraction, if you triple the mass of one of the objects and double the distance between their centers, the new force of gravity compared to the old will be 0.75 times the original force (0.75 Fg).The orbital period of Satellite B compared to Satellite A is 2.83 times larger.
This is because the force of gravitational attraction between two objects is inversely proportional to the square of the distance between their centers of mass. If you double the distance between two objects, the force of gravitational attraction decreases by a factor of 4 (2^2). On the other hand, if you triple the mass of one of the objects, the force of gravitational attraction increases by a factor of 3.
Therefore, combining these effects, the new force of gravity will be 3/4 or 0.75 times the original force.
Satellite A and Satellite B are both in stable orbit around the Earth, but Satellite B is twice as far from the Earth's center as Satellite A. The orbital period of Satellite B compared to Satellite A is 2.83 times larger.
This is because the orbital period of an object in circular motion is dependent on the radius of the orbit. The further an object is from the center of the orbit, the longer it takes to complete one full orbit. Since Satellite B is twice as far from the Earth's center as Satellite A, its radius is also twice as large. The orbital period is directly proportional to the radius, so Satellite B's orbital period will be 2.83 times larger than Satellite A's orbital period.
Therefore, the correct statement is:
The new force of gravity compared to the old will be 0.75 Fg.
The orbital period of Satellite B compared to Satellite A is 2.83 times larger.
Learn more about gravitation :
brainly.com/question/3009841
#SPJ11
Two charges, Q=10 nC and Q-70 nC, are 15 cm apart. Find the strength of the electric field halfway between the two charges Express your answer with the appropriate units.
The strength of the electric field halfway between the two charges is approximately -1.82 × 10^5 N/C.
To find the strength of the electric field halfway between the two charges, we can use Coulomb's law. The formula for the electric field due to a point charge is given by:
Electric field (E) = k * (Q / r^2),
where k is the electrostatic constant (k ≈ 8.99 × 10^9 N m^2/C^2), Q is the charge, and r is the distance from the charge.
Q1 = 10 nC (positive charge)
Q2 = -70 nC (negative charge)
Distance between charges (r) = 15 cm = 0.15 m
To find the electric field at the midpoint between the charges, we need to calculate the electric fields due to each charge and then sum them up.
Electric field due to Q1 at the midpoint:
E1 = k * (Q1 / (r/2)^2)
Electric field due to Q2 at the midpoint:
E2 = k * (Q2 / (r/2)^2)
Now we can calculate the electric field at the midpoint by summing the individual electric fields:
E_total = E1 + E2
Substituting the given values and solving the equations:
E1 = (8.99 × 10^9 N m^2/C^2) * (10 × 10^(-9) C / (0.075 m)^2)
E1 ≈ 3.04 × 10^4 N/C (to 3 significant figures)
E2 = (8.99 × 10^9 N m^2/C^2) * (-70 × 10^(-9) C / (0.075 m)^2)
E2 ≈ -2.12 × 10^5 N/C (to 3 significant figures)
E_total = E1 + E2
E_total ≈ -1.82 × 10^5 N/C (to 3 significant figures)
Therefore, the strength of the electric field halfway between the two charges is approximately -1.82 × 10^5 N/C (newtons per coulomb). Note that the negative sign indicates the direction of the electric field vector.
learn more about "electrostatic ":- https://brainly.com/question/17692887
#SPJ11
Suppose the interior angles of a triangle are φ 1 ,φ 2 , and φ 3 , with φ 1 >φ 2 >φ 3 . Which side of the triangle is the shortest? a. The side opposite φ1. b. The side opposite φ 2 . c. The side opposite φ3. d. More information is needed unless the triangle is a right triangle.
Suppose the interior angles of a triangle are φ 1 ,φ 2 , and φ 3 , with φ 1 > φ 2 > φ 3. The side of the triangle which is the shortest is:
c. The side opposite φ3.
The interior angles of a triangle are the inside angles formed where two sides of the triangle meet.
Properties of Interior Angles:
The sum of the three interior angles in a triangle is always 180°.Since the interior angles add up to 180°, every angle must be less than 180°.In a triangle, the lengths of the sides are related to the sizes of the interior angles. The side opposite the largest interior angle is always the longest, and the side opposite the smallest interior angle is always the shortest.
In the given scenario, we have three interior angles of the triangle: φ1, φ2, and φ3, where φ1 > φ2 > φ3. This means that φ1 is the largest angle, φ2 is the second largest, and φ3 is the smallest.
According to the property, the side opposite the largest angle (φ1) is the longest, and the side opposite the smallest angle (φ3) is the shortest.
Therefore, based on the given information, the side opposite φ3 is the shortest.
To know more about interior angles here
https://brainly.com/question/12834063
#SPJ4
a A simple refractor telescope has an objective lens with a focal length of 1.6 m. Its eyepiece has a 3.80 cm focal length lens. a) What is the telescope's angular magnification?
The telescope's angular magnification is approximately -42.11, indicating an inverted image.
Angular magnification refers to the ratio of the angle subtended by an object when viewed through a magnifying instrument, such as a telescope or microscope, to the angle subtended by the same object when viewed with the eye. It quantifies the degree of magnification provided by the instrument, indicating how much larger an object appears when viewed through the instrument compared to when viewed without it.
The angular magnification of a telescope can be calculated using the formula:
Angular Magnification = - (focal length of the objective lens) / (focal length of the eyepiece)
Given:
Focal length of the objective lens (f_objective) = 1.6 mFocal length of the eyepiece (f_eyepiece) = 3.80 cm = 0.038 mPlugging these values into the formula:
Angular Magnification = - (1.6 m) / (0.038 m)
Simplifying the expression:
Angular Magnification ≈ - 42.11
Therefore, the angular magnification of the telescope is approximately -42.11. Note that the negative sign indicates an inverted image.
To learn more about angular magnification, Visit:
https://brainly.com/question/28325488
#SPJ11
A cube with edges of length 1 = 0.13 m and density Ps = 2.7 x 103kg/m3 is suspended from a spring scale. a. When the block is in air, what will be the scale reading?
"When the cube is in air, the scale reading will be approximately 58.24 N." Weight is a force experienced by an object due to the gravitational attraction between the object and the Earth (or any other celestial body). It is a vector quantity, meaning it has both magnitude and direction. The weight of an object is directly proportional to its mass and the acceleration due to gravity.
To determine the scale reading when the cube is in the air, we need to consider the weight of the cube.
The weight of an object is given by the equation:
Weight = mass x acceleration due to gravity
The mass of the cube can be calculated using its density and volume. Since it is a cube, each side has a length of 0.13 m, so the volume is:
Volume = length^3 = (0.13 m)³ = 0.002197 m³
The mass is then:
Mass = density x volume = (2.7 x 10³ kg/m³) x 0.002197 m³ = 5.9449 kg
The acceleration due to gravity is approximately 9.8 m/s².
Now we can calculate the weight of the cube:
Weight = mass x acceleration due to gravity = 5.9449 kg x 9.8 m/s²= 58.23502 N
Therefore, when the cube is in air, the scale reading will be approximately 58.24 N.
To know more about weight & mass visit:
https://brainly.com/question/86444
#SPJ11
A rogue black hole with a mass 24 times the mass of the sun drifts into the solar system on a collision course with earth Review | Constanta Part A How far is the black hole from the center of the earth when objects on the earth's surface begin to lift into the air and "Tail" up into the black hole? Give your answer as a multiple of the earth's radus Express your answer using three significant figures. VAZO ? Submit Request Answer Re
The distance of the black hole from the center of the Earth when objects on the Earth's surface begin to lift into the air and "tail" up into the black hole is approximately 1.72 × 10²² meters.
For a non-rotating black hole, the event horizon is determined by the Schwarzschild radius, which is given by the formula:
Rs = 2GM/c²
Where Rs is the Schwarzschild radius, G is the gravitational constant, M is the mass of the black hole, and c is the speed of light.
Given that the mass of the black hole is 24 times the mass of the Sun, we can substitute the values into the formula:
Rs = 2(6.67 × 10⁻¹¹ N m²/kg²)(24 × 1.989 × 10³⁰ kg)/(3 × 10⁸ m/s)²
To simplify the equation for the Schwarzschild radius, let's perform the calculations:
Rs = 2(6.67 × 10^-11 N m^2/kg^2)(24 × 1.989 × 10^30 kg)/(3 × 10^8 m/s)^2
First, we can simplify the numbers:
Rs = 2(1.60 × 10⁻¹⁰ N m²/kg²)(4.77 × 10³¹ kg)/(9 × 10¹⁶ m²/s²)
Next, we can multiply the numbers:
Rs = 3.20 × 10⁻¹⁰ N m²/kg² × 4.77 × 10³¹ kg / 9 × 10¹⁶ m²/s²
Rs = 1.72 × 10²² m
So, the distance of the black hole from the center of the Earth when objects on the Earth's surface begin to lift into the air and "tail" up into the black hole is approximately 1.72 × 10²² meters.
To know more about black hole, click here-
brainly.com/question/32885855
#SPJ11
Light is incident on two slits separated by 0.20 mm. The observing screen is placed 3.0 m from the slits. If the position of the first order bright fringe is at 4.0 mm above the center line, find the wavelength of the light, in nm. Question 2 0 out of 20 points Find the position of the third order bright fringe, in degrees. Question 3 0 out of 20 points Shine red light of wavelength 700.0 nm through a single slit. The light creates a central diffraction peak 6.00 cm wide on a screen 2.40 m away. To what angle do the first order dark fringes correspond, in degrees? Question 4 Dout of 20 points. What is the slit width, in m ? Question 5 0 out of 20 points What would be the width of the central diffraction peak if violet light of wavelength 440.0 nm is used instead, in cm ?
Question 1:
The first step is to calculate the wavelength of light using the given information. We can use the equation for the position of the bright fringes in a double-slit interference pattern:
y = (m * λ * L) / d
where:
y = position of the bright fringe
m = order of the fringe (in this case, m = 1)
λ = wavelength of light
L = distance from the slits to the observing screen
d = separation between the slits
In this case, y = 4.0 mm = 0.004 m, L = 3.0 m, and d = 0.20 mm = 0.00020 m.
Rearranging the equation, we get:
λ = (y * d) / (m * L)
Plugging in the values, we have:
λ = (0.004 * 0.00020) / (1 * 3.0)
= 0.00000008 / 3.0
= 0.0000000267 m
Converting the wavelength to nanometers (nm), we multiply by 10^9:
λ = 0.0000000267 * 10^9
= 26.7 nm
Therefore, the wavelength of light is 26.7 nm.
Question 2:
To find the position of the third order bright fringe, we use the same formula as in Question 1. However, this time m = 3. We need to find the value of y in meters.
y = (m * λ * L) / d
Rearranging the equation, we have:
y = (m * λ * L) / d
Plugging in the values, we have:
y = (3 * 26.7 * 10^-9 * 3.0) / 0.00020
= 0.012 / 0.00020
= 0.06 m
Therefore, the position of the third order bright fringe is 0.06 m.
Question 3:
To find the angle corresponding to the first order dark fringe, we can use the equation for the angular position of dark fringes in a single-slit diffraction pattern:
θ = λ / (2 * a)
where:
θ = angle of the dark fringe
λ = wavelength of light
a = width of the slit
In this case, λ = 700.0 nm = 700.0 * 10^-9 m, and the width of the central diffraction peak (which is twice the width of the slit) is given as 6.00 cm = 0.06 m.
Rearranging the equation, we get:
a = λ / (2 * θ)
Plugging in the values, we have:
a = (700.0 * 10^-9) / (2 * 0.06)
= 0.0117 / 0.12
= 0.0975 m
Therefore, the width of the slit is 0.0975 m.
Question 4:
The width of the slit is already calculated in Question 3 and found to be 0.0975 m.
Question 5:
To find the width of the central diffraction peak for violet light with a wavelength of 440.0 nm, we can use the same equation as in Question 3:
θ = λ / (2 * a)
where:
θ = angle of the dark fringe
λ = wavelength of light
a = width of the slit
In this case, λ = 440.0 nm = 440.0 * 10^-9 m
To know more about wavelength, visit;
https://brainly.com/question/10728818
#SPJ11
If the mass of a planet is 3.10 1024 kg, and its radius is 2.00 106 m, what is the magnitude of the gravitational field, g, on the planet's surface?
The magnitude of the gravitational field on the planet's surface is approximately 45.88 N/kg.
The magnitude of the gravitational field, g, on the planet's surface can be calculated using the equation:
g = G * (m / r^2)
where G is the gravitational constant (approximately 6.67430 x 10^-11 N m^2/kg^2), m is the mass of the planet, and r is the radius of the planet.
In this case, the mass of the planet is given as 3.10 x 10^24 kg, and the radius is given as 2.00 x 10^6 m.
Substituting these values into the equation, we get:
g = (6.67430 x 10^-11 N m^2/kg^2) * (3.10 x 10^24 kg) / (2.00 x 10^6 m)^2
Simplifying this calculation, we have:
g = 4.588 x 10^1 N/kg
Therefore, the magnitude of the gravitational field on the planet's surface is approximately 45.88 N/kg.
To understand the meaning of this value, we can say that for every kilogram of mass on the planet's surface, there is a gravitational force of 45.88 Newtons acting on it.
This force pulls objects towards the center of the planet. The larger the gravitational field, the stronger the force of gravity experienced.
to learn more about gravitational field
https://brainly.com/question/14906359
#SPJ11
Problem 9.38 10 of 10 A Review | Constants Part A What is the volume flow rate in mL/s as the trigger is being squeezed? Express your answer in milliliters per second. A child's water pistol shoots a stream of water through a 1.0-mm-diameter nozzle at a speed of 4.3 m/s. Squeezing the trigger pressurizes the water reservoir inside the pistol. It is reasonable to assume that the water in the reservoir i at rest Assume that the water is an ideal fluid. Q = 3.4 mL/s Submit Previous Answers ✓ Correct Correct answer shown. Your answer 3.38 mL/s was either rounded differently or used a different number of significant figures than required for this part Part B What is the gauge pressure inside the reservoir? Express your answer with the appropriate units. НА ? Pg - Value Units Submit Request Answer
Part A: The volume flow rate is approximately 0.00338 mL/s.
Part B: The gauge pressure inside the reservoir cannot be determined without the height of the water column.
How We Calculated Volume Flow Rate?
Part A:
To find the volume flow rate (Q) in mL/s, we can use the equation:
Q = A x v
where A is the cross-sectional area of the nozzle and v is the velocity of the water stream.
Given:
Nozzle diameter = 1.0 mm
Radius (r) = diameter / 2 = 0.5 mm = 0.0005 m
Water stream velocity (v) = 4.3 m/s
The cross-sectional area (A) of the nozzle can be calculated as:
A = π x r[tex]^2[/tex]
Substituting the values:
A = π x (0.0005 m)[tex]^2[/tex]
Now, calculate the volume flow rate (Q):
Q = A x v
Substituting the values:
Q = π x (0.0005 m)[tex]^2[/tex] x 4.3 m/s
Converting the result to mL/s:
Q = π x (0.0005 m)[tex]^2[/tex] x 4.3 m/s x 1000 mL/L x 1 L/1000 mL
Simplifying the expression:
Q ≈ 0.00338 mL/s
Part B:
To find the gauge pressure inside the reservoir, we can use the Bernoulli's equation for an ideal fluid:
P + 0.5ρv[tex]^2[/tex] + ρgh = constant
Assuming the water in the reservoir is at rest (v = 0), the equation simplifies to:
P + ρgh = constant
Since the water in the reservoir is at rest, the velocity term becomes zero, and we are left with only the hydro-static pressure term.
The gauge pressure (Pg) inside the reservoir can be calculated using the formula:
Pg = ρgh
where ρ is the density of water, g is the acceleration due to gravity, and h is the height of the water column.
The density of water (ρ) is approximately 1000 kg/m[tex]^3[/tex], and the acceleration due to gravity (g) is approximately 9.8 m/s[tex]^2[/tex].
Since the height of the water column is not provided in the problem statement, we cannot calculate the gauge pressure inside the reservoir without this information.
Learn more about volume flow rate
brainly.com/question/13385366
#SPJ11
consider a series rlc circuit with a resistor r= 43.0 , an inductor L=12.2 and a capacitor c= 0.0365, and an ac source that provides an rms voltage of 25.0 volts at 14.8 kHz. what is he rms current in the circuit in milli amps
The RMS current in the series RLC circuit is approximately 0.023 mA.
To find the RMS current in the series RLC circuit, we can use the formula:
IRMS = VRMS / Z
where IRMS is the RMS current, VRMS is the RMS voltage, and Z is the impedance of the circuit.
Impedance (Z) can be calculated using the formula:
Z = √(R² + (XL - XC)²)
where R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.
Given:
Resistance (R) = 43.0 Ω
Inductance (L) = 12.2 H
Capacitance (C) = 0.0365 F
RMS voltage (VRMS) = 25.0 V
Frequency (f) = 14.8 kHz = 14,800 Hz
First, we need to calculate the inductive reactance (XL) and capacitive reactance (XC):
XL = 2πfL
XL = 2π(14,800 Hz)(12.2 H) ≈ 1,083.55 Ω
XC = 1 / (2πfC)
XC = 1 / (2π(14,800 Hz)(0.0365 F)) ≈ 30.97 Ω
Now, we can calculate the impedance (Z):
Z = √(R² + (XL - XC)²)
Z = √((43.0 Ω)² + (1,083.55 Ω - 30.97 Ω)²) ≈ 1,086.22 Ω
Finally, we can calculate the RMS current (IRMS):
IRMS = VRMS / Z
IRMS = 25.0 V / 1,086.22 Ω ≈ 0.023 mA
Therefore, the RMS current in the circuit is approximately 0.023 mA.
Read more about the RLC series here: https://brainly.com/question/27387167
#SPJ11